Soco Powered roller conveyors roller conveyor...

SOCO

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Gbododnxydspfx Ah Hog Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: used, Year of construction: 2008, functionality: fully functional, BVM compacta. Gbedpfx Ahetu Ihde Hjg

Condition: new, Dimensions: W2500 / L5250 / H- 2100 Gjdpfx Ahsu E Ezpo Hebg

Condition: used, Year of construction: 1995, 1995 Friulmac FN7 1300 Cutting-off machine for Parquet heads or similar products. Maximum opening 1,400 mm Maximum step width 220 mm Gjdeuichrepfx Ah Hobg

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Power: 4,4 Kw Overall dimensions Lenght: 6620 mm Width: 3035 mm Gbsdpsucir Refx Ah Hsg Height: 1741 mm Weight: 1200 Kg

Condition: excellent (used), Soco Automatic Case Sealer / Box Taper Model T55 For random size boxes Top and bottom tape heads Adjustable height legs Complete with infeed and out feed gravity roller conveyors In excellent condition Godpfjhvr Afjx Ah Hsbg Delivery / Shipping can be arranged if you require this service

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Gbjdpfxsmhhf Ss Ah Hjg - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Type 400C Surface planer: Table dimensions 400х1800 mm Cutterblock diameter 70 mm Cutterhead rotating speed 5700 rpm 3 knives 400x20x3 mm Max table adjustment 4 mm Thickness: Table dimensions 400x760 mm Max cutting depth 4 mm Feed speed 7 m/min Cutterblock rotation speed 5700 rpm Max working height 220 mm Min working height 4 mm Mortising: Table dimensions 250х500 mm Longitudinal stroke 205 mm Trasversal stroke 95 mm Chuck (SX) 16 mm Chuck rotation speed 5700 rpm Gbedpfx Ahsd Nl Sfe Hsg Motor 3 kW Accessories: service wrenches, guards on mortise chuck, planer guide. Weight 390 kg

Condition: new, Year of construction: 2010, functionality: fully functional, Equipment: CE marking, double-sided, Linija za duzinsko spajanje sa dva frezera.Presa duzine 6000 mm. Masina je nova i nikada nije koriscena.Uz masinu idu svi pripadajuci alati. Gbodpfxewptnms Ah Hog

Condition: excellent (used), functionality: fully functional, Filter for extraction of dust and sawdust. Gsdjtzld Uopfx Ah Hjbg