Horizontal Turning Machine

SPINNER TC 110

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF OFFER U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Nwsdpfxjt E Dbyo Aa Deb Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Nwjdpfxeur Hfze Aa Dsb Fanuc 310is controller

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens, controller model: 828D + Shopmill, total height: 2,560 mm, total length: 2,350 mm, total width: 2,160 mm, table width: 550 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 4,300 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 700 mm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Travel X/Y/Z: 850/550/550 mm Max. speed range: 10000 rpm AC drive power (40 %): 13.5 kW (Siemens) Vertical tool magazine for 30 tools Tool holder: SK 40 Rapid traverse X/Y/Z: 36/36/36 m/min Including equipment among others: Preparation for 4th & 5th axis Robust roller guides in all axes Spindle cooling system (oil cooling) Fast double-arm gripper with preselection and vertical magazine with 30 tool positions Hinged belt chip conveyor Coolant through the spindle with 20 bar high-pressure pump Nsdpfodkh Tiox Aa Dowb Blast air through the spindle Coolant gun Movable electronic handwheel On request we can offer this machine including a suitable rotary table for 4th & 5th axis. Please indicate this in your inquiry!

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control HEIDENHAIN TNC 530 Tool taper SK- 40 Tools changer 120 fach number of spindle speeds 12.000 U/min/rpm Machine on 32.224 Spindle hours 10.850 h weight of the machine ca. 9,5 t dimensions of the machine ca. 5,45 X 3,53 X 2,63 m Nwedpfew Rrcqex Aa Deb

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Nwsdowm Rqajpfx Aa Deb Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Nwsdpfxjw Tg Ado Aa Djb Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: excellent (used), Year of construction: 2004, Control Siemens Sinumerik 840D Bar capacity 65 mm Speed 5,000 min-1 2 x 12-way turret with driven tool Turret 1 with Y-axis Part collection device Belt filter system Chip conveyor Nodpfx Aajwh U D Ho Dewb Bar loading magazine IRCO Profimat

Year of construction: 2009, condition: used, Technical details: tool taper: Ø 54 voltage: 3Ph AC 400V / 50-60 Hz V / Hz compressed air: Anschluß: 6 bar total power requirement: 11 kW Total weight, approx.: 120 kg dimensions L x W x H: 0,7 x 0,65 x 1,7 m Nedpfx Aaewp I S Hj Dswb Application: for secondary quick tool change through targeted inductive heating. Induction shrink fit unit with water cooling (tank 30 litres, built into the housing) Cooling medium: emulsion for Ø 3 - 50mm HM (carbide) and Ø 6 - 50 HSS tools Tool holder Ø 54mm Concentricity < 0,003mm ThermoGrip chuck Operation via control panel *

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0728, X = 5,000 mm Y = 1,025 mm Z = 1,100 mm / Horizontal Z = 1,000 mm / Vertical - Continuously adjustable NC swivel head, +/- 105 degrees, as a CNC axis for horizontal and vertical machining, indexing accuracy +/- 5 seconds - Heidenhain iTNC530 controller, hard disk with approx. 21 gigabytes of free space - HSK100 motor spindle, speed range 20-8,000 rpm, drive power 44 kW, torque 350 Nm - NC rotary table SKH 4/630 Horizontal faceplate Faceplate diameter: 630 mm Standard height: 300 mm Indexing accuracy: +/- 12" Max. load: 900 kg Max. tangential torque at 63 bar: 2400 Nm Includes AC motor with integrated rotational measuring system and hydraulic clamping, as well as an additional CNC axis - NC rotary table SKH-NC 9/1450 Horizontal faceplate Faceplate diameter: 1450 mm Indexing accuracy: +/- 12" Without direct measuring system Max. load: 5,000 kg Max. tangential torque with clamping: 16,000 Nm Includes AC motor with integrated rotational measuring system and hydraulic clamping, as well as an additional CNC axis Nwedpfx Aexgnfxja Djb Special enclosure for rotary table diameter 1450 mm included Swing circle diameter: 1500 mm No turning operation possible! - 60 tool stations - Fully enclosed working area with roof - Bellows with steel lamellae - Direct measuring system for NC rotary table, indexing accuracy +/- 5 degrees - Direct linear measuring system for X, Y, Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Working area lighting, 6-fold - Mounting elements - 3D wireless measuring probe - Tool probing system for measuring and checking cutting tools in the machine, TT140 - Unilok ESM 130 zero-point clamping system 36 units integrated in the machine table 16 units embedded in the rotary table faceplate (diameter 1450 mm) 4 units embedded in the rotary table faceplate (diameter 630 mm)

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Nwsdpfx Aajuyx Hzj Djb