Impact protection

Stahl L-Form Höhe 400 mm

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Gedpfxoh Ek Dae Anxoub - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,444 h, load capacity: 1,000 kg, lifting height: 2,700 mm, fuel type: electric, mast type: duplex, construction height: 1,850 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Load centre: 600 Gsdsvtu A Ujpfx Anxeub Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery type: Lithium-ion Battery year of manufacture: 2019 Description: Integrated charger, foldable operator platform

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Gsdpfx Ajmhhypsnxoub Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Godpemkixwefx Anxsub Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, mileage: 250 km, power: 235 kW (319.51 HP), first registration: 09/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 4,000 mm, loading space width: 2,450 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, soot filter, MAN TGM 18.320 BB Meiller TRIGENIUS 3S Tipper with Palfinger PK 12.501 Unused exhibition vehicle with day registration * All-wheel drive 4X4, selectable * Leaf/leaf suspension * Meiller 3-way tipper TRIGENIUS 4000 mm x 2420 mm * Sidewalls: 600 mm, front wall: 800 mm M Jet * 7 pairs of retractable lashing rings * Drop-side relief on right and left * Swing tailgate * Rotating beacons * Dual-circuit trailer hydraulics * 40 mm trailer hitch * MAN media system * Automatic gearbox * Engine brake * Sun visor * Air conditioning (Climatronic) * On-board computer * Turn assist system * Emergency brake assist * Reversing camera * Multifunction steering wheel * Virtual cockpit Guodpfx Aoxnu Szsnxjb * Refrigerator * Lifting roof * Electrically heated exterior mirrors * Electric window lifters * Palfinger loader crane PK 12.501 SLD 5 * Central locking with remote control Interim sale and errors expressly reserved! Sale exclusively according to our terms and conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some may result from transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is provided for information purposes for the initiation of a contract. All information provided is without guarantee and thus does not constitute warranted characteristics.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Gusdpfxsmhh Dhe Anxjb Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Steel staircase, exterior staircase, extension staircase Gsdpfxerg Ivbe Anxsub -Steel staircase: Add-on staircase with treads and railings on both sides -Width: 880 mm -Step spacing: approx. 200 mm -Dimension of top step: 1940 mm -Transport dimensions: 3880/880/H970 mm -Weight: 150 kg

Condition: used, mileage: 2,37,089 km, power: 265 kW (360.30 HP), first registration: 03/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2026, color: red, gearing type: mechanical, emission class: euro6, loading space volume: 6 m³, loading space length: 4,200 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, all wheel drive, crane, navigation system, * Sun visor * ABS * Radio * Cruise control * Electric windows * Electrically adjustable mirrors * Mirror heating * Roof hatch * Longitudinal and transverse differential locks * Transfer case * Off-road reduction gear * AP axles * Steel bumper Gusdpfxoxvvyvs Anxob * Raised air intake * Air dryer * Trailer coupling * Hydraulic connection for trailer * Air horns * Duomatic air connection * Navigation system * Onboard computer * Central locking * Driver comfort seat * Seat heating * Rear axle diff lock * 16-speed gearbox * Suspension: leaf-spring/air * Payload: 6,000 kg * Continuous brake: engine brake --- Special body: Crane: Hiab XS 122 ES-2 Hiduo, foldable, radio remote control + walk-around control, dual hydraulic extension, oil cooler, 6th + 7th hydraulic circuit for slewing/rotator and grab operation, load diagram readout: Lifts 5.3 t at 2.3 m, 2.8 t at 4.2 m, 1.52 t at 7.9 m --- Body: Meiller three-way steel pallet tipper, raised bulkhead, spring-assisted drop sides left + right, lashing rings. Sale to businesses only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL DETAILS WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. All contracts, invoices, pro forma invoices, orders, and sales negotiations are subject to our General Terms and Conditions (see legal notice/imprint).

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Length per rack row: approx. 11.945 mm Number of bays per row: 04 pcs. á 2.880 mm Number of levels plus floor level: 04 pcs. Included in delivery: 05x pallet rack uprights, used material color: cream white upright profile: 85 x 50 x 17 x 3.0 mm upright type: C 808 S275 Incl. cross and diagonal braces, base plates The stands are pre-assembled ( welded truss ) 6.640 mm high 870 mm deep 32x pallet rack beams, used material color: green INP profile: 80 x 42 mm clear width: 2.880 mm max. load per truss pair 1.600 kg with evenly distributed load 64x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x heavy duty dowels, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 10x shims, used execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground 01x load plates Guodpfxoi D Em Ae Anxjb with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: good (used), Technical data for pallet rack frame: Racking system: META (Thyssen) Type: Multipal S Included in delivery: 01x pallet rack frame, used Material color: Sendzimir galvanized Frame type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Including horizontal and diagonal braces, frame protectors and base plates The frames are pre-assembled (bolted lattice construction) Height: 7,000 mm Guedpoyz Tczsfx Anxob Depth: 500 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Transport or shipping beyond self-collection is subject to additional costs, which can be requested separately depending on the delivery location and scope of delivery.