Center Lathe

STANKO 1A625

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Type: ILS RBL 80/12 Year of manufacture: 2016 Gbsdpfoht Rl Eox Ap Dju Clamping range: 5-80 mm diameter Length: 100-1200 mm

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm Gbsdpfx Apeu Nigko Deu revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm Gbedjtycdkopfx Ap Dsu total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l feed length max. 600 mm total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range Gbedpfx Aoxab R Ujp Dju * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: ready for operation (used), Year of construction: 1999, A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible. Gbodew I E Dpspfx Ap Dju

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment Gsdpfx Aeuagxpop Dobu - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm Gsdpfsidmptex Ap Djbu weight 4000 kg

Year of construction: 2017, condition: ready for operation (used), A Strausak CNC 5-axis tool grinding machine for the production and resharpening of solid carbide, HSS and special tools is available. Travel X/Y/Z: 420mm/250mm/485mm, B-axis: 340°, C-axis: 360°, Rapid traverse X/Y/Z: 15m/min, max. tool diameter production/resharpening: 32mm/150mm, max. tool length: 500mm, max. cutting length: 300mm, Tool holder: HSK63F/SK50, Speed: 12000rpm, Tool positions: 6. Machine dimensions X/Y/Z: approx. 2250mm/2200mm/2200mm, Weight: approx. 4350kg. Documentation available. An on-site inspection is possible. Gbodpfxozg Itie Ap Dju

Condition: used, Automatic in-line welding machine for PVC profiles (or similar), with a cycle fully controlled by PLC. Operating cycle: PLC with digital control of temperature and welding/cooling intervals via display. Adjustable profile support arms, facilitating positioning and ensuring operator safety. Gjdoyw Rx Eopfx Ap Djbu Machine in perfect working condition, subject to regular annual maintenance, complete with manual.

Condition: as good as new (ex-display), Year of construction: 2025, CMS Taktika Vertical cnc working center for Glas Bearbeitungsmaße: Max. Glas-Length: 3.100 mm Max. Glas-height: 2.000 mm Min. Glas-length: 320 mm Gbedpfswd Ichjx Ap Dou Min. Glas-height: 220 mm Thickness: 4-15 mm Options: - 2x groups of suction cups which 2 suction cups on each group - 2x Elektrospindle 6 kW 0-12.000 U/Min - Tool Magazin with 12 slots - Additional drilling from the backside - CAD/CAM - central lubrification