STEINER Projet MJP 2500 Plus

STEINER Projet MJP 2500 Plus

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Fsdpfxsvtftqe Afpjpi Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: good (used), Year of construction: 2008, Format: max 820 x 1,750 mm Format (pallet feeder): max 820 x 1,200 mm; min 150 x 270 mm Format (round pile feeder): max 820 x 1,750 mm; min 150 x 150 mm Folding capacity: max 205 m/min Length with pallet feeder: 5,180 mm Length with round pile feeder: 7,680 mm Width: 3,210 mm Cross-fold: max 16 pages Features Feeder: Control: - Vacutable - Vacubelt - Counting device 1st folding unit: - Upstream slitter shaft - 4 buckle plates - Motorized buckle plate adjustment - Spiral rollers - Slitter shaft cassette MWK - Noise protection device 1st cross fold: - Cross fold folding knife - Pocket after the cross break on the right - Slitter shaft after the cross break - Spiral rollers Fsdpsrbzv Isfx Afpepi 2nd cross break: - Cross break Folding knife left - Spiral rollers

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, Used ProJet SD6000 3D printing machine using stereolithographic technology. The machine has had extremely low hours usage during its life so far, having been installed and minimally utilised from time to time for research projects at the University of Sheffield AMRC research department known as the “Factory of the Future”. Serial # 10311178101 Year 2014 MACHINE CONSTRUCTION & FEATURES The ProJet 6000 HD SLA 3D provides SLA quality in a compact footprint and is a printer which puts the unmatched capabilities of Stereolithography 3D printing technology, fine-tuned for cost-efficiency and unrivalled material availability, into a smaller footprint. 3D Printed SLA parts with unrivalled accuracy and surface finish. High Flexibility 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. • Two build platforms • One material delivery cart • Projet TM6000 Print tray • Washing Unit • Curing Unit 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. Fpsdpfxetvfwkj Afpei Print modes: High Definition, Ultra High Definition Resolution: (HD) 0.125mm, 0.125mm layer. (Ultra-high definition): 0.125mm, 0.10mm layer. Net construction volume: (short) 250 mm x 250 mm x 50 mm (medium) 250 mm x 250 mm x 125 mm, (tall) 250 mm x 250 mm x 250 mm. Accuracy: 0.025 – 0.05 mm per 25.4 mm of part dimension. BENEFITS: Stereolithography technology (SLA) Max build envelope capacity (W x D x H): 250 x 250 x 250 mm (10 x 10 x 10 in). Highest precision and accuracy Exchangeable Material Delivery Modules (MDMs). Utilizing two laser spot sizes per layer – no compromise between speed or feature detail. True line drawing in X and Y to accurately define curves. Industry-leading 3D Sprint software for file preparation and production. Cloud connectivity for predictive and prompt service with 3D Connect.

Condition: used, Flat Pile Feeder Folding Machine Stahl KC 56/6-KTL for 16 pages Cross Fold and 6 buckles 2 knives with Side buckle Falzmaschine / Combination Folding Machine Stahl KC 56/6-KTL 16 Seiten Falzmaschine / 16 pages Cross Fold Fpjdoyw Hg Sspfx Afpoi Year 1990 - Serial-No. 41655/90-169032 Arbeitsbreite max. 780mm / Working width max. 780mm Flachstapelanleger / Flat Pile Feeder 1. Station 6 Taschen / 1. Folding Unit 6 Buckles 2. Station 2 Schwerter mit Seitentasche / 2. Folding Unit 2 knives with Side Buckle Leimeinrichtung Planatol / Gluing unit Planatol Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Fpodpfecuiz Tsx Afpsi Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control Optional: positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm working area with protective glass! (Extension of the work area optionally to (180, 350 mm) almost maintenance-free

Condition: used, Designation: 3D Printer Selective Laser Melting Machine Fpedpfxowpkcno Afpji Manufacturer: SLM Solutions AG Model: SLM 280 HL Build Volume: 280 x 280 x 365 mm (minus substrate plate height) Machine Configuration: Single Optic, 1x 400W Materials Used: (1.4404, 1.2709, L40, AlSi10Mg) Laser Operating Hours: 1500 h Build Rate up to 88 cm³/h: depending on material and part geometry Variable Layer Thickness: 20 μm - 90 μm Minimum Feature Size: 150 μm Focus Diameter: 80 - 115 μm Max. Scan Speed: 10 m/s Average Shielding Gas Consumption during Build Process: 3.0 l/min (argon) Average Shielding Gas Consumption during Flooding Process: 200 l/min (argon) Electrical Connection / Power Consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 3.5 - 5.5 kW Compressed Air Requirement / Consumption: 60 l/min at 6 bar Machine Dimensions: 2600 mm x 1200 mm x 2700 mm Condition: Used item as shown in the pictures. Please contact us if you have any questions. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please request shipping costs outside Germany). Sale to commercial customers only, without warranty or guarantee. Technical data may vary and errors in the description may occur and are subject to change.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, type of input current: AC, input voltage: 240 V, input current: 12 A, input frequency: 60 Hz, 6x HD2500 plus Fodpfxeyb R E Ss Afpepi Very good condition

Condition: like new (used), functionality: fully functional, machine/vehicle number: BC120058, Year of construction: 2022, operating hours: 260 h, As-new 3D scanner, model VL500 from Keyence, available at a competitive price. The device is in perfect working condition and will be offered for sale at the end of March 2026. The ideal cost-effective solution for surface scanning of technical components. Resolution: 0.001 mm; repeatability: 0.002 mm; measurement accuracy: ±0.01 mm. Original purchase price was over €80,000. Fodsx Dy Iaopfx Afpopi

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 50 h, total length: 1,000 mm, total height: 500 mm, total width: 500 mm, type of input current: AC, overall weight: 550 kg, temperature: 280 °C, ambient temperature (min.): 15 °C, ambient temperature (max.): 28 °C, positioning accuracy: 0.1 mm, wall thickness: 1 mm, space requirement length: 2,715 mm, space requirement height: 2,765 mm, space requirement width: 2,170 mm, High-performance materials: Best-in-class print heads With its nozzles, the STUDIO G2 is ready for printing with fiber-reinforced and other industrial-grade materials at maximum speed and precision. The specially designed extruder achieves a high level of detail with layer thicknesses as low as 0.1 mm on objects up to one meter long. This allows for more options for perfecting a part's mechanical properties. Optimal printing temperatures: The temperature-controlled build chamber Fpsdpewgbcyjfx Afpsi The STUDIO G2's enclosed, temperature-controlled print chamber creates perfect conditions for printing with industrial-grade materials. The transparent doors allow users to visually monitor the printing process with safe and easy access to the print bed. User-friendly features such as automatic pausing when the housing is opened ensure a smooth and safe printing process. Independent Temperature Control: Heated Filament Chambers The STUDIO G2's integrated heated filament chambers ensure that the printing materials remain dry in a constantly controlled environment, guaranteeing print quality unmatched in this class. The filament chamber exceeds industry standards by offering temperature control independent of the print room. Optimal Print Temperatures: Fast-Heating Print Bed Low setup time thanks to a fast-heating print bed. Increased bed temperature up to 100°C improves adhesion for a wider range of materials. New inductive sensor for fast, precise semi-automatic bed leveling. Simple & Intuitive: The New Slicer The user-friendly BigRep "BLADE" slicing software allows for greater control over printing parameters and offers presets for all BigRep-compatible materials, enabling a quick, hassle-free start to print. BLADE is one of the fastest and most precise slicers on the market, specifically optimized for large-format printing. Large enough for every idea: The large print area Create space for innovation with the STUDIO G2's large 500 mm x 1000 mm x 500 mm print area, packed into a compact housing and with features optimized for fast, high-resolution printing of large-format, industrial-grade parts.

Condition: excellent (used), Year of construction: 2017, Stratasys 3D Printer PolyJet J750 With the Stratasys J750 3D printer, you can optimize and streamline the process of manufacturing models using various materials on a single build platform within the same print job. During the design phase, you can assign colors to different components of a model. The model can then be saved as a VRML file and printed with the desired colors. Ongoing maintenance package until June 2026, including spare parts, is included. The Stratasys J750 3D printer offers a build volume of 490 mm x 390 mm x 200 mm (19.3 x 15.35 x 7.8 in). AC Power Connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 220–240 VAC, 50–60 Hz, 7 A, single-phase Technical Details Overall length: 1,400 mm Overall height: 1,100 mm Overall width: 1,260 mm Input current type: Alternating current (AC) Total weight: 430 kg Input voltage: 230 V Input current: 13 A Input frequency: 50–60 Hz Ambient temperature (min): 18 °C Ambient temperature (max): 25 °C Applications Fedpfxjyly Auo Afpepi - Rapid prototyping - Concept models - Medical models - Tooling and fixtures - Coloured textures