Autoclave for cans

Steritech autoclave for cans

Year of construction: 2010, condition: excellent (used), Autoclave Brand Spomasz Model WSA 18 Serial number: 106 Year of construction: 2010 Voltage 3 x 400 V, 50 Hz, 16 A Dimensions: 5400 mm x 2600 mm x 2300 mm It has a current UDT inspection Csdpfx Afswfz Rnoyogr

Condition: used, Year of construction: 1992, Technical details: max. temperature: 120 °C internal diameter: 980 mm internal length : 2580 mm external diameter: 1500 mm external diameter : 2740 mm wall strength: ca. 6,5 mm content: ca. 2000 l weight: 1425 kg Autoclave tank It is possible that this autoclave were built for the process of steam sterilization (according to operating parameters) The operating overpressure of +2 bar per room probably refers to the execution of the steam sterilization process, not to the pressure resistance of the container. Cgedpeu Nz I Tjfx Afysr - Permissible operating temperature 120 °C *

Condition: good (used), functionality: fully functional, Diameter range: 99 mm - 180 mm Height range: 90 mm - 250 mm Heads: 3 Production capacity: up to 90 cans per minute Cgjdpfx Afst Dhv Soyjr Tooling for approx.: 153 mm

Year of construction: 2020, condition: ready for operation (used), An autoclave Stock DFT including a Jumag steam system for the food industry is available. Batch trolley capacity: 2, process method: steam-water spraying, application: sterilization/pasteurization, gross volume: approx. 1550l, steam system: Jumag DG560, steam output: approx. 560kg/h. Including 6 batch trolleys. Documentation available. An on-site inspection is possible. Cedpfx Afoyh Nvgjysgr

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. Codpfxjx S Ipwe Afysgr - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Condition: ready for operation (used), functionality: fully functional, The Lagarde SVS100 autoclave is designed for industrial facilities requiring controlled thermal processing of packaged products. It ensures consistent and reproducible sterilization cycles, thereby contributing to the sanitary safety of production lines. As a result, processing remains controlled throughout the operation. Additionally, the Sterinov design meets the stringent requirements of food processing environments. This autoclave can be integrated into production lines dedicated to canned foods, ready meals, and packaged products. Its 400 V electric operation facilitates installation in standard industrial facilities. Furthermore, the robust construction of the equipment allows for repeated use under demanding production conditions, providing a reliable solution suited to industrial requirements. The SVS 100 is engineered with an architecture that guarantees stable thermal cycles, keeping operating parameters constant during processing phases. The simple electrical setup also makes maintenance and daily operation easier, supporting secure, uninterrupted production without unnecessarily complicating the process. Offered as a used unit by Europ’Équipement, the Lagarde Sterinov SVS 100 autoclave is identified by its manufacturer's data plate and undergoes inspection before being put back into service. This ensures users have a traceable, immediately operable unit. Acquiring a reconditioned autoclave also helps reduce capital investment while maintaining a tool suited to industrial sterilization requirements, making this model a cost-effective solution that ensures reliable thermal processing. Technical specifications: Model: SVS 100 Type: industrial sterilization autoclave Power supply: 400 V Frequency: 50 Hz Codpjyguaqefx Afyegr Maximum operating current: 12 A Wiring diagram number: 6000.A Marking: Sterinov manufacturer's plate

Year of construction: 2025, operating hours: 400 h, condition: like new (used), functionality: fully functional, The autoclave material is Q345R, outside with special insulation - rockwool 80 mm thickness. The heating way is electric air heating, in the autoclave there are heating pipes, distribute in the left and right of the autoclave (energy and electric saving), heating power is about 36 KW totally. Fan inside the tank with the electrical engine outside of the autoclave (water cooled) Design vacuum function, 14 vacuum ports equipped with the vacuum pipes and related fittings and vacuum gauges. The tank is equipped with a frame style inside trolley. Specifications: - 2000 mm internal working length and 1200 mm internal working diameter - door with the locking system (manually and piston controlled by the control unit  - the second check for the closed door and opening door) - Working pressure max. 8 bar (tested for the 13 Bar) - Adjustable AIR - max. working temperature 210 °C - Air volume 2770 litres - weight 1395 KG - water cooling system with the water pump, after the process is done to cool down temperature inside the tank - 1 port for the valve for the Pressurizing - 2 ports for the valves for the de- pressurizing - 1 port for the temperature controller (PT 100) - 1 port for the maximum temperature controller - 1 port for the analog manometer - 1 port for the electric sensor manometer - 1 port for the vacuum sensor The autoclave design safety interlocking device, has been passed the identification by technician supervision and the certificate is held. The control unit and the electrical system is also tested and the certificate is given. All functions of the autoclave are displayed and controlled by the control unit on the monitor. The control unit cabinet has got SIEMENS SIMATIC. The unit is fully programable for the different temperature and pressure rising in time. It also gives the report to your PC of the process after the process is done if you need. Cgedjyut Ayepfx Afyer Full drawing and documents and new electrial and pressure revisions are held. CE certificate is held too

Condition: ready for operation (used), Diagonal min.: 57 x 70 mm Diagonal max.: 95 x 122 mm Codpfxoyyq N As Afyogr Height range: 76 mm – 280 mm Production capacity: up to 300 pcs/min.