Pallet Stackers

Still EXV 10 Li-lon, RES//LS//BIS//14.10.26

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, diameter: 1.5 - 160 mm Godpfowgm Saex Ap Dobu stroke: 400 mm weight: 800 kg

Condition: used, functionality: fully functional, total height: 1,900 mm, total width: 1,200 mm, overall weight: 1,200 kg, input voltage: 400 V, Equipment: documentation/manual, type plate available, Precision cross-honing machine Used Sunnen Eclipse EC-3500 CGM-27 Bore diameter – Honing range: 1.5 – 165 mm Godpfx Ajyx Dv Hsp Dobu Stroke length – Honing length: 6 – 170 mm Spindle speeds: 200 – 3,000 rpm Stroke rates: 60 – 500 strokes Total power requirement – Spindle drive: 4.1 kW Stroke motor: 1.1 kW Machine weight: approx. 1200 kg Depth: 1.6 m Width: 1.2 m Height: 1.9 m SICK safety light curtain Oil filtration / filter system for the honing oil is integrated – spare filter cartridges available Horizontal cross-honing machine / honing machine, type EC 3500, and operating manual for the honing machine Documentation/manual, nameplate available An inspection while the machine is powered on is possible after prior appointment. Price upon request All technical specifications are subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 3,000 mm, fuel type: electric, mast type: duplex, High-lift pallet truck, reach truck Load capacity: 1500 kg Lifting height: 3000 mm Length: 1720 mm Width: 805 mm Height: 2040 mm Mast type: Duplex Gbjdpfx Apsui Rbbe Dju Dead weight: 590 kg Fork length: 1150 mm Year of manufacture: 2026 Operating hours: 0 Condition: new Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24 V Immediately ready for use Available immediately!

Condition: good (used), Year of construction: 2000, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1100 mm stroke of upper beam 100 mm throat 195 mm working feed 10.0 mm/sec return speed 70.0 mm/sec 180 bar work height max. 840 mm table width 110 mm dayligth 295 mm Control ATL 550 total power requirement 5.5 kW weight 2500 kg range L-W-H 2100 x 1200 x 1800 mm Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model "ATL 550" * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1 Y2 axis) * Possibility of programming different programs * Memory capacity max. 200 programs - max. 400 blocks * Swivel control panel, left front Gbedpfeyk E Umjx Ap Dsu - Electro-motorized backgauge (X axis) * with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crowning - Split insert/bending tools - Lateral safety guards - rear safety guard - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 2001, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tools and products library * Graphical 2D programming * automatic bending sequence calculation and collision detection * EMERGENCY stop button at the front - CNC axis adjustment: * Y1 - Y2 - X - R axis CNC crowning * Manual adjustment of the 2x stop fingers, from the front (Z axes) - CNC electro-motorized table crowning - CNC electro-pneumatic die displacement (I axis) Gbjdjyn R Hvepfx Ap Deu - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x free-moving foot switch - Lateral safety device (hinged doors) - rear safety device (sliding doors) - original operating instructions ( french )

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: GG6BCO-7816, total width: 3,660 mm, total length: 7,100 mm, overall weight: 3,300 kg, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, compressed air connection: 6 bar, pressure: 6 bar, Bottero 100BLC jumbo table with belts and air cushion as loading and supporting table. Serial Number: GG6BCO-7816 Gjdpfx Apjx A D Rvj Djbu Dimensions: L7100xW3660mm and approx. 3300Kg

Condition: ready for operation (used), Year of construction: 2010, pressure 160 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 400 mm ram stroke speed 200 mm/sec work speed 10.0 mm/min return speed 165 mm/sec work stroke ca. 350 mm dayligth ca. 660 mm oil volume 450 ltr. table height 830 / 950 mm table width 75.0 / 60.0 mm voltage 400 Volt total power requirement 18.5 kW weight 13440 kg range L-W-H 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request ----- ULTIMA PLUS electro-hydraulic press brake with: * increased installation height .. approx. 660 mm * increased cylinder stroke .. approx. 350 mm ----- Gbodpfx Aoxaambjp Dsu - in checked condition - machine video - ?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control "DNC 880 S" * swiveling control panel, front right * 2D graphic programming & product display * tool & program library - CNC controlled axes: Y1 + Y2 + X + R axis - CNC electro-motorized back stop, with ball screws (X axis) - CNC electro-motorized Height adjustment of the stop beam (R axis) - 2x manually adjustable back stop fingers (Z axis) - 2x front, movable support arms with T-slot ("Sliding System") - 1x set of bending/insert tools * AMADA / SYSTEM A tool system - Laser protection device in front of the machine - Safety device behind the machine (door) - 1x freely movable foot switch - original operating instructions

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, power: 5.5 kW (7.48 HP), saw blade diameter: 450 mm, Equipment: saw blade guard, ALTENDORF F-45 panel saw !Saw is fully functional! With digital display for the parallel fence Sliding table length: 2850 mm Year of manufacture: 1990 Power: 5.5 kW, motor with motor brake Saw blade: ø 450 mm Angle: 45° & 90° Operating options: Raising, lowering, tilting with handwheel Godpfxsylbd Ho Ap Debu Replaced wear parts: Dust extraction hood, bearings, motor brake, lower rollers, drive belt

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: FANUC, controller model: 18i-MB5, spindle speed (max.): 12,000 rpm, spindle motor power: 21,000 W, number of axes: 3, This 3-axis STAMA MC 526 vertical machining center was manufactured in 2008. It features a Fanuc 18i-MB5 CNC, twin-spindle with double tool changer, and a high-pressure coolant system. The machine offers a spindle speed of 12,000 rpm, spindle power of 21 kW, and a tool capacity of 60. X/Y/Z travels are 1000/400/360 mm respectively. If you are looking to get high-quality milling capabilities consider the STAMA MC 526 machine we have for sale.Contact us for more information. • Number of tools (ATC): 60 • Twin-spindle with double tool changer: Yes • Rapid feed (X/Y/Z): 45 m/min • Guideways: Roller guideways Additional equipment • CNC rotary table with continuous rotation (4th axis) • High-pressure coolant • Chip conveyor: Belt-type Gsdpjx D E Rmofx Ap Debu Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2013, operating hours: 635 h, load capacity: 2,000 kg, lifting height: 1,700 mm, fuel type: electric, construction height: 2,520 mm, gearing type: other, overall weight: 857 kg, total length: 1,910 mm, color: red, mileage: 635 km, first registration: 11/2013, suspension: other, driver cabin: other, wheelbase: 1,542 mm, emission class: none, fuel: electricity, The Toyota SWE 200D is a used pallet stacker specifically designed for industrial use. The model was first registered on November 29, 2013, and has since covered 635 kilometers. The operating hours also total 635 hours, indicating moderate use. The vehicle is available in red. This forklift is ideal for transporting loads within warehouses and production areas. With various loading options, it offers operational flexibility. A registration service is also available, and delivery within Germany can be arranged for an additional charge. Viewings can be arranged without prior appointment during business hours Monday to Saturday. Further information is available by phone or email. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted. Gjdstyz Hdopfx Ap Dobu