Emag Blanking Line
Working length 1500mm
Maximum metal thickness 3mm
15 ton hydraulic uncoiler
inside diameter 500mm
working speed-50m per minute
Direction: Right to Left
Entry Coil Car
V-Type Floor Standing
Hydraulic Lift
Mechanical Traverse
Mandrel Uncoiler
Powered Mandrel Expansion
4-Leaf Mandrel Design
Powered Hold-Down Roll
Feed-Up Motor
Hydraulic Peeling Table
Two Sets of Driven Pinch Rolls
Multi Cut Slitting Head
Screw-On Slitting Knives
Powered Arbor Adjustment
DC Motor Drive
Mech...
Control system: SIMATIC S 7 1500
Maximum thickness of the cut sheet metal: 1 mm
Minimum thickness of the sheet metal: 0.35 mm
Maximum weight of the sheet metal coil: 6500 kg
Maximum external diameter of the sheet metal coil: 700-1200 mm
Minimum internal diameter of the sheet metal coil: 500 mm
Maximum internal diameter of the sheet metal coil: 510 mm
Minimum width of the strip in a coil: 790 mm
Bjoacxhyco
Maximum width of the strip in a coil: 1200 mm
Line speed: 15-200 m/min
Total powe...
Cutting capacity 1250 mm x 1.5 steel, and 3 pairs of knife with roll intake tube, table T1-1250/band leadership / management, catchment output approx. 5000 kg with manual upper shaft adjustment, with engine rolling scissors ALE 1.0 steel, complete with PLC-M1 POTI Siemens touch panel, decoiler, machine (option) sheet direction: choice from right to left or left to right
Machine weight, kg: 775
Number of knives 5 pair
Blade shaft diameter 100 mm
Overall dimensions 1500 x 2200 x 1500 mm
Sskojo
Cu...
- Highly productive line DMS - France
- Speed - 200m/min.
- Total Power - 250 KW
- Sheet thickness - 0,5 - 3,5 mm
Bmtxqyeyf3
- Width - 1550 mm
- Coil weight - 15 T
All other information find on pictures
Sheet metal slitting machine (slitter, cut-to-length machine) is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate.
This sheet metal slitting machine lets you to cut the material into four strips
The diameter of the rolls is 56 mm
Depends on customer preferences we can produce machine to cut metal into 2-20 strips and feeding width can be 200-1300mm.
The operator of the sheet metal slitting machine-slitter(cut-to-lengt...
- 250 - 1250 x 1.5 mm when using 3 MP steel and aluminium, VA: 0.8 mm
- with motorised roller shears for attachment without straightening unit
- Running direction from left and right
- Colour: blue/yellow
- Machine weight: approx. 560 kg
8d8mets
- Space requirement: 2200 x 1500 mm
- Total power requirement: 400 V
- Straightening rolls: without straightening unit
- Number of knives: 4 pairs
Machine is repaired, checked and cleaned by a specialist and is then fully functional. Test run is carried ...
Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine.
Cut-to-length slitting machine SM 1250x8 lets you to cut the material into eight strips.
The diameter of the rolls is 56 mm
There are types of the sheet metal cut-to-length machines we produce:
-Electric cut-to-length slitting machine SM 1250x4 (cutting f...
This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Sheet metal working
Dealer for Sheet metal working
