ELECTRIC FORK TRUCK 3 WHEELS

STILL R50/15

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 2,800 h, load capacity: 1,500 kg, lifting height: 3,200 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Hodpfx Aezuhhceh Sjnt ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Quattro Technical condition: good Front tire type: Superelastic Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire condition: 20 - 40% Battery type: PzS Side shifter, 3rd valve, rear work light, front work light.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Hedpfx Ahswra S Ro Sont Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 7,409 h, load capacity: 1,500 kg, lifting height: 5,430 mm, fuel type: electric, mast type: triplex, Equipment: UVV, Reliable STILL R50-15 three-wheel electric forklift with a triplex mast, free lift, and a lifting height of 5.43 m. Suitable for warehouses, logistics, production, and confined working areas. Technical data: Manufacturer: STILL Model: R50-15 Year of manufacture: 1995 Load capacity: 1,500 kg Drive: Electric Mast: Triplex mast with free lift Lifting height: 5,430 mm Operating hours: 7,409 h Battery: in good condition Charger: included Safety inspection: SP valid until 2025 Condition: Hodpfx Ahszd U Emj Sjnt Used, technically functional, regularly maintained. Shows signs of wear and tear due to age and use. Type plate partially damaged, load chart available. Location: 65618 Selters. Collection or transport from the location is possible.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 7,545 h, load capacity: 1,500 kg, lifting height: 5,350 mm, free lift: 1,810 mm, fuel type: electric, mast type: triplex, construction height: 2,285 mm, fork carriage width: 890 mm, fork length: 1,100 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Hsdpfxszkngwe Ah Sont Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Non-marking Front tire size: 18x7-8 Rear tire type: Non-marking Rear tire size: 18x7-8 Battery voltage: 24V Battery capacity: 920Ah Battery manufacturer: HSR Battery type: PzS Battery year of manufacture: 2002 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not buy a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles. Work light front, roof cover, windshield, full free lift, non-marking tires, interior mirror, windshield wiper, single-pedal operation, LED, 3-wheel, seat.

Condition: ready for operation (used), Year of construction: 2016, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2016, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. Hodsx D Di Uspfx Ah Sjnt • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: used, load capacity: 1,500 kg, Manufacturer: STILL GmbH Model: R50-15 Drive type: Electric (battery) Load capacity: 1,500 kg Load center: 500 mm Design: Counterbalance forklift, front loader Hjdpfxsy I A Akj Ah Sont Tyres: Solid rubber or superelastic (industrial) Drive motor: Electric motor Lift motor: Electric motor Battery voltage: 80 V Own weight: 2,605 kg Operating hours: 51,219 h

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 829 h, load capacity: 1,500 kg, lifting height: 3,000 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 1,990 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Electromechanical Hjdpoy Hypfsfx Ah Sjnt Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 18x7-8 Rear tire type: Superelastic Rear tire size: 18x7-8 Battery voltage: 24V Battery capacity: 840Ah Battery manufacturer: Hawker Battery type: PzS Battery year: 2013 Description: In addition to this machine, we offer a range of forklifts and warehouse equipment. All our machines are workshop inspected and certified according to FEM4.004. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not buy a vehicle from us. Leasing & financing options are available upon request at competitive terms. We are happy to provide you with expert and comprehensive advice about our vehicles. Sideshift, 3rd valve, front work lights, full free lift, single pedal, 3-wheel, seat,

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Hsdjtu U Ebjpfx Ah Sjnt

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 22,00,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 Hnedpfxsw U N Ixs Ah Sst - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: new, Year of construction: 2025, Model: C3T Working Area: 3048mm*1524mm Laser Output Power: 6000w/3000w/2000w/1500w Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 100m/min Max. acceleration: 1G 1. Double Fast Exchange Tables Fast exchange of two tables greatly improves efficiency. Chain-drive system has better rigidity and higher accuracy, saving feeding time. 2. Tenon-and-mortise Welded Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. Hnodsg D Nz Rjpfx Ah Sst 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets.