Injection Moulding Machine

Stork ST 13000-1200

Condition: excellent (used), Year of construction: 2018, operating hours: 17,000 h, clamping force: 220 kN, screw diameter: 50 mm, Year: 2018 Type of control: CC300 Number of hours: 17,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 220 T Opening stroke: 530 mm Between columns: 620 mm x620 mm Plate dimensions: 900mm x900 mm Kedpovtm Uiefx Aanofa Mini/max mold: 250/600 mm Max gap between plates: 1220 mm Screw diameter: 50mm Screw length: 20D cm3: 432 Bars: 2002 Motor power: 29kw Heating power: 15.3kw Closing weight: 11.3T Length dimensions: 6.30m Width dimensions: 1.80 m Height dimensions: 2.10 m Cores: NO Robot interface: YES Bimetal: YES

Condition: good (used), Year of construction: 1999, Engel ES 7 K Clamping force 1000 tons Year built: 1999 Screw diameter: 105 mm Injection volume: 4160 cm3 Number of heating zones incl. nozzle: 7 Pump drive power: 130 kW Clamping force: 1100 tons Opening stroke: 1100 Min-max mould height Tie bar spacing: 1400x1150 Machine weight: 64 tons + 18 tons Plus Engel Robot Kfsdpfx Ajlyr Awjanoa Type: ERC 83/2 - CL Year built: 1999 Separate control cabinet

Condition: used, machine/vehicle number: 12579, Rotor diameter: 450 mm Kedpfx Aekyzaveanofa Rotor width: 650 mm 3-knife rotor 2 rows of stator knives inlet cross section approx. 450 x 650 mm drive motor: 37 kW

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Kfsdpfxow Ebpws Aanea Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Servo-hydraulic injection moulding machine Clamping force: 9,000 kN (900 tons) 🔹 General Information: Year of manufacture: 2017 Control system: UNILOG B8 Installed power: 53.9 kW Operating hours: only 999 Kodewzy N Uspfx Aanofa Dry cycle time: 4.0 – 770 sec/mm Machine dimensions (L x W x H): 10,100 × 3,400 × 2,700 mm Machine weight: 35,200 kg 🔹 Injection Unit: Screw diameter: 105 mm Injection volume: 4,545 cm³ Screw rotation speed: 159 rpm Screw L/D ratio: 22 Nozzle stroke / max force: 129 mm / 950 kN Max nozzle travel: 525 mm Number of heating zones: 7 🔹 Clamping Unit: Clamping force: 9,000 kN Max mould opening stroke: 1,800 mm Min / max mould height: 600 mm / 1,200 mm Max daylight (between platens): 2,400 mm Tie bar spacing (H × V): 1,450 × 1,100 mm Ejector stroke / force: 300 mm / 165 kN Mould opening force: 300 kN Core pulls: 2

Condition: good (used), Year of construction: 2014, operating hours: 29,646 h, clamping force: 900 kN, screw diameter: 100 mm, injection weight: 3,691 g, opening stroke: 1,120 mm, We are offering a HAITIAN MA 9000 injection molding machine in excellent condition, ideal for high-volume plastic production. This machine has been carefully maintained and has very low operating hours ( Kfedpfx Aexc U Hzjanea

Condition: excellent (used), Year of construction: 2015, WITTMANN BATTENFELD TM 400/3400 injection molding machine Control -UNILOG B6P Year of production – 2015 NUMBER OF HOURS WORKED 33756 ServoPower SO package: Servo drive with variable speed for hydraulic pump to increase energy efficiency and shorten cycle times according to EUROMAP 60 Cycle II and Cycle III Kfjdpfx Aaswqd Tcjnea _____ Technical data of injection unit: • Screw diameter: 85 mm • L/D ratio (length to diameter): 22 • Specific injection pressure: 1574 bar • Injection volume (calculated): 2128 cm³ • Max. injection weight (PS): 1936.4 g _____ Technical data of closing unit: • Closing force: 4000 kN • Free space between columns: 710 × 710 mm (W × H) • Min. mold height: 300 mm • Max. plate spacing: 1380 mm • Opening stroke: 670 mm

Condition: used, Year of construction: 2015, Technical details: Kfsdpfjw I E R Nsx Aansa closing pressure: 6600 kN weight of the machine ca.: 45,5 t

Condition: good (used), Year of construction: 2019, EASYMASTER EM480-SVP-2 injection molding machines Injection volume 2164 cm3 Clamping force 480 T Kjdeubuznjpfx Aanefa

Condition: excellent (used), Year of construction: 2017, Engel Victory 2550/400 Tech Ecodrive with Sepro Industrial Robot Success 22 / Hybrid Machine / Operating Hours: approx. 300 h in automatic mode Year of manufacture: 2017 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1450 g Injection pressure: 1640 bar Dosage volume: 1558 cc Clamping unit: Clamping force: 400 t Tie bar spacing: 0x0 mm Platen size: 1320x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition, like new Tie-barless, hybrid machine: energy-efficient and very quiet Operating hours: approx. 300 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Injection unit is wear-resistant and corrosion-resistant Kfsdpfx Aasxzz Euenoa Both clamping and injection units are servo-driven Proportional valve on injection unit – precise injection Magnetic quick mold change system Stäubli QMC 122/V3, integrated into the machine control (platens feature their own additional control system) – available at extra cost Sepro Industrial Robot Success 22 Year of manufacture: 2018 5-axis robot Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at additional cost Dimensions: Weight: 26,600 kg Length/Width/Height: 7.70x2.34x2.30 m All machines offered are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our company in Łódź. Price: On request