High-bay warehouse Pallet rack uprights

Stow Pal Rack NS 4.500 mm x 1.450 mm

Condition: ready for operation (used), Slab recovery line with below machines: Cedpjgwqk Sefx Anforc One 2-blade board edger One single blade horisontal resaw Conveyors system between the machines included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Csdpfx Ajqabm Esnforc Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ 1) Bale Shredder MHB: Special price starting from €22,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency converter (FU) – this regulates the speed of the shredding floor. The bales are placed on the shredding floor, and the feed of the shredder is activated. The tines of the shredder tear the straw from the bale and fling it into the hopper. Ideally, the combination of bale shredder and straw shredder is recommended here. Technical data, bale shredder: Performance: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the screen size used in the straw mill, kW, number of straw mill). Without a straw mill, the bale shredder can even process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (l x w x h) Shredder motor: 5.5 kW, 380 volts Shredding floor feed: 0.75 kW, 380 volts Dimensions: 3750x1730x2460 mm (l x w x h) Weight: 400 kg 2) Straw Shredder MHZ 600 - 11/15 kW; immediately available Special price starting from €6,995 net Surcharge for the even larger straw shredder (18.5 kW) + €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380-volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm aperture With star-delta switch, overload protection, and 8 m power cable, ready for connection Discharge nozzle: 160 mm Discharge distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (l x w x h) Weight: approx. 240 kg --- Options available at an additional cost: Infeed auger + €970 net Cyclone (mounting on site by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial dust extraction system (demonstration model) + starting from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: starting from €1,620 net Special shredder extension, 3 m *other sizes will be calculated + €9,750 net Briquette press MPP 180 S; little used demonstration model 70 mm briquettes - up to a maximum of 100 kg/h Starting from €39,700 net * larger machines on request --- Cjdpfx Anjb Nulhsfjrc Description: The muetek bale shredder was developed for shredding round and rectangular bales of hay and straw. The shredder flanged onto the bale shredder shreds straw from all types of cereals, hay, corn, and miscanthus. The muetek machines in the MHZ/MHB series are characterized by their robust construction and solid design. muetek bale shredders in the MHB series are equipped with a chain conveyor, onto which the straw bale is placed using a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredding rotor; the feed speed is adjustable. The shredding rotor is equipped with several tines that tear open the straw bale. The straw separated from the bale is discharged. --- In principle, the machines work for dry raw materials: - Straw - Hay --- Shredding hemp only works with a special shredder Surcharge approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the raw material: Moisture content maximum 12%

Condition: new, Year of construction: 2023, functionality: fully functional, Drying system / dryer suitable for various materials such as powder, granulate etc. - Control for temperature regulation This machine is connected and ready for testing in our machine hall. Codpoqu R Naofx Anferc

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM800 1,400 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 7 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Crsdpfehun Uisx Anfjc Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: good (used), the machine is in good condition, includes electrical cabinets, sharpening machine Crsdpfx Asvdyr Nenfjc

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Year of construction: 2019 With this line, the input and output is the following length: Input: 8M Output: 8M Cjdpfou Dw I Eox Anferc If you want more pictures or information please contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, Type: MN 7.0 FL100 Nominal width: 100mm Basic sensitivity: FE: 0,6mm; NFE: 0,8mm; SUS: 1,2mm Frequency: Hoch Year of construction: 2017 Specific features: new device Crsdpfx Ansm E U Umefjc Typ: Digital 2 VA100 Nominal diameter: 100mm Basic sensitivity: FE: 0,6mm; NFE:0,8mm; SUS:1,2mm Frequency: high Year of manufacture: New device Special features: Compact design with integrated automatic ejection system and funnel pipe diameter: 100mm

Year of construction: 2026, condition: new, NEW MACHINES We have a large selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines for all types of products that need to be turned or replaced pallets. Semi-automatic or fully automatic. Cjdpohmfctefx Anfjrc We deliver and install throughout the EU.

Condition: good (used), 3 x 65 m³ aluminum silo (granulate storage silos) with long frame (used) Csdsvmidyspfx Anferc Contents approx. 65,000 liters Diameter (inside) approx. 3,000 mm Total height approx. 12,000 mm Bulk density: 0.6 kg/dm³ Cone inclination: 90 degrees Connections in the topsoil: 1 vent nozzle with hood DN 200 1 flange nozzle DN 100 In the shell: 1 folding dome DN 450 1 filling pipe pulled downwards DN 80 Cone: The cone ends in a flange DN 150 with suction box otherwise as per sketch and photos