Cylindrical grinding machine

Studer S30

Condition: excellent (used), Year of construction: 2005, operating hours: 38,388 h, functionality: fully functional, machine/vehicle number: 019.3784, workpiece weight (max.): 130 kg, grinding length: 1,000 mm, total width: 1,970 mm, total length: 2,735 mm, total height: 1,700 mm, quill travel distance: 35 mm, quill stroke: 35 mm, quill diameter: 50 mm, distance between centers: 1,000 mm, type of input current: AC, spindle speed (max.): 2,110 rpm, spindle speed (min.): 1,670 rpm, grinding spindle speed: 2,110 rpm, overall weight: 3,400 kg, input frequency: 50 Hz, input voltage: 400 V, workpiece spindle speed (max.): 1,000 rpm, STUDER S30-1, manufactured in 2005, machine no. 019.3784 – universal cylindrical grinding machine, hydraulically controlled, for between-centers grinding and external grinding. Well-maintained, original condition, no indication of damage or weld repairs. Included: Original operating manual from Fritz Studer AG (DE/EN/FR, including spare parts catalog and noise measurement report) and EC declaration of conformity, both issued for this machine number. According to this factory documentation, it is the version with a center distance of 1,000 mm. EQUIPMENT - Grinding spindle with external grinding wheel on the left, Ø 400 x 80 x Ø 127 mm, hydrodynamic plain bearings, mounting taper Ø 63 mm - Workpiece spindle, swiveling 0-90°, MK 5, collet chucks W-25, 30-1,000 min-1 continuously variable via frequency converter - Three-jaw chuck mounted, drive for between-centers grinding, centering point in the tailstock - Tailstock MK 3, quill stroke 35 mm, adjustable spindle pressure, fine adjustment for roundness ± 40 µm - Adjustable dressing device on the tailstock (dressing by hand; diamond is a wear part) - Digital display Sony LD10 on swivel arm - Hydraulic unit Wandfluh (CH), coolant supply with filtration and aerosol extraction - Machine bed made of mineral cast Granitan S103 - 8 grinding wheel mounting flanges, including one balancing flange IMPORTANT – WHAT IS NOT INCLUDED This machine does NOT have an internal grinding attachment, NO belt spindles, and NO in-process measuring control. The series is prepared for these at the factory, but none of them are installed on this machine; available as accessories from STUDER. Grinding wheels are also not included in the scope of delivery. We only describe what we can document photographically. Lsdpjzu T Afjfx Ai Horr TECHNICAL DATA (according to the operating manual for this machine) - Center distance 1,000 mm, clamping length 1,030 mm, table stroke 1,050 mm - Max. workpiece weight between centers 130 kg, table swivels 8.5° - X: Rapid traverse 60 mm, plunge depth 3.4 mm in Ø, feed rate 0.012-6 mm/min, incremental feed from 0.001 mm - Z: 50-5,500 mm/min, smallest automatic table stroke 1.5 mm - Grinding spindle 1,670 / 2,110 min-1; machine's power rating: max. 35 m/s, wheel up to Ø 400 mm at 1,671 min-1, up to Ø 316 mm at 2,114 min-1 - Automatic hydraulic grinding cycle: rapid approach, feed 1 and 2, sparking 0-6 s, automatic shut-off - Guaranteed working accuracy (factory specification): straightness 0.0025 mm over 400 mm, 0.004 mm over 650 mm; roundness in external grinding 0.0003 mm - Operating hours 38,388.5 h; connection 400 V / 50 Hz, max. 13 kVA, air 5 bar; noise level ≤ 75 dB(A) - Weight approx. 3,500 kg (factory brochure, 1,000 mm version), footprint approx. 2,735 x 1,970 mm - Center height: will be remeasured and confirmed upon request CONDITIONS Location: 16727 Velten near Berlin. Machine packed on a wooden pallet, delivery 1-2 working days after payment receipt. FCA Velten (Incoterms 2020), loading onto your truck by our staff included. Payment: 100% advance payment. Inspection possible with short notice by appointment. Demonstration and test grinding only by appointment: the machine is disconnected, setup will be carried out by an external service provider; we will agree on the effort and costs in advance. Technical data according to manufacturer's documents and the included operating manual are provided as information; we will confirm individual values during the inspection or upon request. Offer subject to

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface Lodpfswh Sigox Ai Horr 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: like new (used), ⚙️ Studer S30-1 CE ⚙️ 🔹 High-precision cylindrical grinding machine for external and internal grinding. 📐 Main features: Lredpfx Aiozu Iyfe Her ↔️ Distance between centers: 1000 mm 📏 Height between centers: 175 mm 🇪🇺 CE marking 🔄 COMPLETE RETROFIT The guideways have been refurbished, bearings replaced, the installation and electrical cabinet have been renovated, a complete paint job has been performed, and the geometry has been adjusted to restore the machine's original precision. ✨ An alternative to purchasing a new machine: thanks to the complete retrofit, it offers a level of precision, reliability, and performance comparable to that of a new machine, with a considerably lower investment. 🧰 Wide range of accessories available. 📅 Delivery time: please inquire. 🏷️ Project reference: OP25-007

Condition: used, Surface grinder Center height 125 mm Distance between centers 650 mm Grinding wheel diameter 250 mm Grinding disc diameter 400 mm Total power requirement 8 kW Weight approx. 2500 kg Lsdpfogfqn Nox Ai Horr This is a machine from Machines4you.

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Lrodpfx Aiotqf Rzo Hjr Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: ready for operation (used), functionality: fully functional, The Studer S30-12 CNC is a precision cylindrical external grinding machine from Fritz Studer AG. Brand: Studer Ledpfx Ajzn Nqroi Horr Type: S30-12CNC Serial number: 1248.74 Dimensions: L3250mm Dimensions: W2000mm Dimensions: H1950mm Wheel speed: 30 m/s

Condition: refurbished (used), machine/vehicle number: 3439.39, Universal cylindrical grinding machine for external and internal cylindrical grinding. • Distance between centers: 650 mm • Height between centers: 175 mm • Completely overhauled (refurbished) – The machine was completely disassembled and rebuilt component by component. Guide rails were reconditioned, bearings were replaced, new control cabinet and new electrical installation, complete new paint job, and geometrical readjustment for maximum precision. • Equipped with a digital measuring system (Fagor). • Machine condition comparable to a new machine, ready for immediate use. Lrodpfxjxxy A Ts Ai Her • Extensive accessories included in the scope of delivery, as shown in the photos. • Demonstration under power and test run possible at any time. Availability: Available for immediate delivery!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,443 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 271 mm, travel distance Z-axis: 830 mm, spindle motor power: 17,000 W, total height: 1,950 mm, total width: 3,260 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, product length (max.): 2,440 mm, number of axes: 3, This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details. • V3 Version (No counter spindle, no y axis) • no bar loader • features a main spindle motor power of 25.5 kW (at 40% DC) or 17 kW (at 100% DC) Technical Specification Counter Spindle No Driven Tools Yes Lrodpfx Aeyu Sc Eoi Hor

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: LEAN PRO, FANUC 16 T FULLY FUNCTIONAL RANGE OF ACCESSORIES FILTRATION SYSTEM Lrsdpfx Aszfx D Nei Hor MIST EXTRACTOR MACHINE MANUALS

Condition: refurbished (used), Year of construction: 2025, Studer S30 Maximum distance between centers: 125 mm Distance between centers: 650 mm Workpiece weight: 80 kg Lrsdpfx Aiod Hdxws Her Additional optional features: - Completely new control cabinet with basic PLC and panel - Conversion to ball screw drive incl. PLC Pro (cycle-controlled) - "Workpiece memory" PLC Pro for 10/15/30/50 workpieces - Glass scale in X and Z axes - Swivelable internal grinding device - Motor spindle for internal grinding device - Frequency converter for external grinding spindle - Frequency converter for internal grinding spindle - In-process grinding sensor - Guard for external grinding spindle - Safety door - manually operated - Grinding wheel flange - LED spotlight with flexible arm - Matching coolant system

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: Ledpfx Aexyllvei Herr • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 019.3790, Machine undergoing repair/overhaul = estimated delivery time approximately 8-10 weeks. Lrsdpfx Aezbqzaoi Hsr Technical data + accessories, see separate PDF.

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Lrsdpfxjvca Ize Ai Hor Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 2014, Technical details: max. wheel diameter: 150 mm gear width: 350 mm max. module: 4 total power requirement: 48 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 4,88 x 4,40 x 3,56 m spindle turning speed range: 100-1000 U/min Ledpoxtbmiefx Ai Herr Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning. *

Year of construction: 1999, condition: ready for operation (used), travel distance X-axis: 275 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: FANUC, controller model: Series 16-T, number of axes: 2, Cylindrical grinding machine manufactured in 1999. This STUDER S30 LEAN PRO features maximum table swivel 8.5 degrees, X-axis travel of 275 mm, and Z-axis travel of 50 mm. If you are looking to get high-quality grinding capabilities, consider the STUDER S30 LEAN PRO machine we have for sale. Contact us for further details. Ledjy Hi T Hspfx Ai Hsrr TECHNICAL SPECS:- Centre height: 175 mm (6.9") - Centre distance: 00 mm (39.4")- Longitudinal slide Max. travel: 50 mm (41.4")- Longitudinal slide Speed (vt): ,000 mm/min (394 ipm)- Longitudinal slide Resolution: mm (.000.004")- Maximum table swivel (Centre distance 00): 8.5 degrees- Wheelhead slide Max. travel: 275 mm (.8")- Wheelhead slide Speed (vt): ,000 mm/min (394 ipm)- Wheelhead slide Resolution: mm (.000.004")- Max. workpiece weight between centres: 130 kg (286 lbs)- Max. load moment (Mmax): 160 Nm (116 ft lbs)- Workhead: Non-swivelling, Roller bearing, AC-Servodrive - Workhead Option: Camlock Adapter - Tailstock Fitting taper: Morse 3 - Tailstock Travel of barrel: 35 mm (1.37")- Control Unit: Fanuc Series 16 (32-Bit processors, ISO and pictogram programming)- Wheelhead Variants: Turret wheelhead U left 400x80 mm Turret wheelhead U left 500x80 mm Grinding wheel right 400x40 mm Grinding wheel right 250x25 mm- Internal grinding attachment: For belt driven spindles Ø0 mm - Max. grinding length (Ls): SPW + b - 80 mm - Max. diameter with three-jaw chuck (ØF): 129 mm - Max. diameter with closed steady (ØL): 140 mmHours: 47.550Condition: Well maintained*The internal grinding spindle has not been in operation for a long time because it was disconnected due to a fault in the frequency converter.