Cylindrical grinder cnc

STUDER S33 CNC

Condition: used, Year of construction: 2019, Wire EDM Machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control Hybrid design Csdpfx Asxpfy Ssbcegn Travel distances X/Y/Z: 400 x 300 x 220 mm Travel distances U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS - Optical Drive System Tubular direct drives on XY axes Linear scales on XY axes Intelligent AT – Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic fine hole search function 5 controlled axes – prepared for additional axes PFC – Precise Finish Circuit LLS - Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler ä21126

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, CNC Control: Professional 5 (FANUC) X travel (mm): 550 Y travel (mm): 1,000 Z travel (mm): 500 B axis (mm): 150 C axis (degrees): 360,000 Number of pallets: - Table dimensions (mm): ø500 Table load capacity (kg): 350 Cutting feedrate X, Y, Z (mm/min): 32,000, 40,000, 40,000 Rapid traverse max. X, Y, Z (m/min): 48, 50, 50 Spindle speed (rpm): 14,000 Spindle power (kW): 18.5 / 15 Taper type: HSK63 Torque (Nm): Magazine type: Chain Magazine capacity (positions): 317 Max. tool diameter (mm): 90 Max. tool diameter with adjacent slots empty (mm): 140 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): - Through spindle coolant (bar): yes Cgjdpfx Aexmgcpjbcjn Equipment: Rotary table with digital measuring system Work light Through spindle coolant Electronic handwheel Dimensions: Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Condition: good (used), Year of construction: 2000, Machine come without tool holders and any additional equipement. Cgjdpfx Aow Tc S Ujbcon Parts shown by hand not come. Technical details are shown on picture.

Condition: new, Year of construction: 2025, machine/vehicle number: 0000, We offer complete revised FAT Lathes, in factories geometry, bed ground by FAT, new electrics, Cedpfsnqzaiox Abcogn TUR 630 M x 2000 or TUR 630 M x 3000 TUR 630A x 3000 or TUR 630 A x 4000 spindlebore 140mm , 2 chucks 400 mm Bison Machine deliverytimes 3 - 4 Months after written order Accescories as per Customer specifications

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Cjdpjd E A I Iofx Abcjgn Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): Cgedpfx Asurw Uysbcon 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented Cgjdpeul Efmofx Abcen by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 1996, machine/vehicle number: 7/4986, Capacity: 250 - 400 ton V – Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg Cgjdpfxjuqdxij Abcen Standard configuration Automation roll-off try with leveller

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 3815407, WEIGHT 8000KG Cgedst Nhqyepfx Abcsn FEM ISO 1Am M4 KW 2.4/15.5 ( 50 Hz) MAXIMUM CAPACITY 16 TON

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or * Cgodpfsia Rtdjx Abcsn