Injection molding machine

Sumitomo (SHI) Demag EL EXIS S 200/560 - 840

Year of construction: 2009, condition: ready for operation (used), Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available. Knodjy Tx Rbspfx Adhoa

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002 Knodpfxsp Audqe Adhsa

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Kjdpfx Adevl Skgohena Working hours: 38.035 h

Condition: like new (used), Year of construction: 2008, operating hours: 6,200 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 75 mm, Krauss-Maffei KM 420-2000 CX Krauss-Maffei injection molding machine, 420 tons of clamping force. Only 6,000 hours of automatic operation. Year of manufacture 2008. MC5 control. Screw diameter 75 mm. Extras: 8 hot runner zones. 2 cores on fixed platen, 2 cores on moving platen. 1 pneumatic valve on moving platen. The injection molding machine is delivered reconditioned by UK Transitus' expert technical team. We can offer commissioning at our clients' facilities, ensuring operation upon completion of the installation. Technical Details 75mm screw Injection pressure: 1635 bar Kedowq D Efopfx Adhena Shot volume: 1237 cm3 Shot weight: 1126 g Maximum distance between plates: 1400 mm Minimum mold thickness: 380 mm Opening stroke: 1020 mm Distance between columns: 900 x 800 mm Plate dimensions: 1270 x 1230 mm 75mm screw Clamping force: 4200 kN Year of manufacture: 2008 Working hours: 6282

Condition: new, welding current 20 - 60 A cutting capacity 1 - 20 mm open-circuit voltage 104 V Required air-pressure min. 4 bar connected load 7,9 kW connected load frequency 400 V weight 16 kg Dimensions (LxWxH) 480 x 260 x 360 mm Digital display. Surge protection. Plasma torch. Earth cable. Reducing valve with moisture separator. Equipped with IGBT technology "Delivered without CEE plug". Knsdpfsupxuvox Adhea

Condition: good (used), functionality: fully functional, power: 310 kW (421.48 HP), fuel type: diesel, overall weight: 33,000 kg, Year of construction: 2020, operating hours: 2,411 h, Transport weight: 32,000 kg Discharge width: 2,440 mm Discharge height: 2,700 mm Discharge hopper volume: 5 m³ Transport dimensions: 16,800 x 3,000 x 3,400 mm (L x W x H) Engine manufacturer: Caterpillar C9.3B Engine power: 310 kW Weighing system: Pfreundt KW50 with printer Discharge belt width: 800 mm Kedpfjzkg Hpjx Adhona Maximum discharge size: 200 mm Cone crusher: Nordberg HP200e

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Kjdpfx Adoxl Tp Tohona Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,703 h, functionality: fully functional, machine/vehicle number: Bau Nummer 443, overall weight: 30,000 kg, total width: 2,500 mm, transport width: 2,500 mm, year of last overhaul: 2025, We offer this refurbished Doppstadt DW-3060 K single-shaft shredder, manufactured in 2019. Telematics active until 06/2028 All bearings and all conveyor belts are original, new Doppstadt parts All wear parts are original, new Doppstadt parts Manufacturer: Doppstadt Model: DW-3060 K Year of manufacture: 2019 Condition: refurbished Category ID: 2097 Type ID: 2590 Kodezhlpwjpfx Adhsna Machine type: Single-shaft shredder If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, 🚢 20-FOOT SEA CONTAINER NEW (ONE TRIP) 🚢 RAL5010 ✅ Immediately available ✅ Wind and waterproof ✅ Robust steel construction ✅ Ideal as a storage container, material container, or construction site container ━━━━━ 📏 TECHNICAL DATA 🔹 External dimensions: • Length: 6.06 m • Width: 2.44 m • Height: 2.59 m 🔹 Internal dimensions: • Length: approx. 5.90 m • Width: approx. 2.35 m • Height: approx. 2.39 m 🔹 Volume: approx. 33 m³ 🔹 Tare weight: approx. 2,300 kg 🔹 Permissible total weight: 30,480 kg Kodpfx Ajy Ihpvsdhena ━━━━━ ⭐ YOUR ADVANTAGES ✔ New, one-trip container ✔ High-quality wooden floor ✔ Double doors with locking mechanism ✔ Weatherproof and durable ✔ Stackable and craneable ✔ Ready for immediate use ━━━━━ 🏗 VERSATILE APPLICATIONS ✓ Construction site ✓ Commercial use ✓ Industry ✓ Agriculture ✓ Tool storage ✓ Material storage ✓ Furniture storage ✓ Private storage area ━━━━━ 🚚 DELIVERY AND UNLOADING POSSIBLE THROUGHOUT GERMANY We will gladly prepare a customized offer for you.

Condition: used, Year of construction: 2005, operating hours: 40,000 h, clamping force: 25 kN, displacement volume: 440 cm³, injection pressure: 1,550 bar, overall weight: 2,500 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz Kedpeynbcnofx Adhena delivery time: on request terms of payment: 100% prior to delivery