Flat-bed cutting machine

Summa F1612-1

Condition: good (used), Year of construction: 2003, functionality: fully functional, Offered is a Clipper Poly Clip PDC 700, year of manufacture 2003. The machine is in good condition, fully functional, and immediately ready for use. Includes thread dispenser and loop former (caliber 28 to 115 mm). Further information upon request. Payment in cash or advance payment. Sale only to commercial customers, no warranty or guarantee. Iedpjxh Hprjfx Alxjtk

Condition: good (used), Year of construction: 2010, operating hours: 2,185 h, functionality: fully functional, For sale: a Handtmann VF-608 Plus vacuum filler. Year of manufacture: 2010. 400V, 3.0 kW. The machine is entirely made of V2A stainless steel, in good condition, fully functional, and ready for immediate use. Operating hours: 2,185 h. Iodpfx Aozcwy Eolxotk Dimensions: 70x80x180 cm. Upon request, it can also be supplied with a holding device, casing filler, or a LEMS portioning device; additional costs apply, please inquire. Further information available upon request. Payment in cash or by advance payment! Sale only to commercial businesses. No guarantee, no warranty.

Condition: used, Year of construction: 2005, Number of belts: 2-belt max. Passage height: 150 mm max. Working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller, sanding shoe 1st unit: electronic individual segments 35 mm Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1370 mm Sanding belt speed of 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubber-coated contact roller 65° Shore, sanding shoe 2nd unit: electronic individual segments 35 mm Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1370 mm Sanding belt speed of 2nd unit: continuously variable 2 - 18 m/sec Belt blowing device: for 2nd unit Cleaning brushes: Yes Finish sanding possible: Yes Vacuum carpet: Yes Feed rate: continuously variable from 2.5 - 13 m/min Control: Touch screen, electric/pneumatic Belt oscillation: yes Infeed height: fixed (top part moves) Table display: digital Working height or table height: 900 mm Isdpozkh Sysfx Alxetk Motor power: 36 kW Storage location: Nattheim

Condition: used, This listing is for a used ‘Konica Minolta AccurioPress C7090’ colour production system Item for sale: 1 x Konica Minolta AccurioPress C7090 with the following equipment: Iodpfx Aloy R Nbxsxjtk incl. OT-512 incl. RU-518m incl. Stacker LS-507 incl. Intelligent Quality Care Unit IQ-501 incl. Paper Deck PF-712 incl. Paper Deck PF-812 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 926,200 pages Colour: Approx. 709,302 pages Black: Approx. 216,898 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, Year of construction: 2026, 🏆🌍WRAVOR WRC 2000 – THE WORLD’S LARGEST HORIZONTAL BAND SAW 💪🏻exceptional heavy-duty horizontal band saw, designed for the sawing of large-diameter logs and demanding industrial applications. 💪🏻massive construction, outstanding rigidity and high cutting capacity 👉🏻 the highest level of heavy-duty horizontal band saw technology. ⚙️ when size, strength and precision matter – WRC 2000 delivers: 🔹 Up to 2,000 mm wheel diameter 🔹 Designed for large-diameter exotic, hardwood logs 🔹 Extremely robust and rigid construction 🔹 Heavy-duty components for demanding sawmill operations Isdsztp A Espfx Alxetk 🔹 High cutting capacity and excellent stability 🔹 WRAVOR technology – reliable, durable quality 🔩WRAVOR WRC 2000 – built for the biggest logs and the toughest sawing conditions.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Offered is a bacon slicer by Treif, model: FLEXON. Year of manufacture: 2015. 380 V. Completely stainless steel (V2A). The machine is fully functional and ready for immediate use. Itedpfx Aoy Dvhfjlxok Chute size approx. 55x10x10 cm. 2 pairs of slicing grids, see photo. Further information upon request. Payment in cash or advance payment. Sale only to commercial buyers. No guarantee, no warranty.

Condition: used, Year of construction: 2007, Air suction collator HORIZON VAC-100a, 10 Stations, used Key Features - Efficient and Reliable: The Horizon VAC-100a is designed for demanding environments. It ensures your collating jobs are completed quickly and efficiently - Touch & Work: Thanks to 'Touch & Work' technology, the VAC-100a is easy and intuitive to operate - Memory: The machine has 9 programmable memory slots for repeat jobs, saving you time and effort - Accuracy and Precision: Say goodbye to miss-feed, double-feed, and jam problems. The VAC-100a offers error prevention controls to ensure each set is perfectly collated Specifications - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Performance: up to 9,500 sets/h - Loading capacity: 55mm/station - Power: 230V; 50Hz - 1.86kW - Dimensions: 842x652x1,961mm - Weight: 310kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Iedpfszp Hpnsx Alxjtk Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2012, functionality: fully functional, 1 OKUMA CNC Lathe Model LT2000EX-2M1Y with OSPP200LA CNC Controller Including CE mark 1 set 〈European Standard Specification〉 1-1 Spindle motor VAC 11/7.5 kw (5 min./cont. ) 2 set 1-2 Spindle speed 50 - 6,000 min-1 2 set 1-3 Spindle dia. 62/100 mm, 140 Flat nose 2 set 1-4 C-axis control, 360 degree at 0.001 degree increment 2 set 1-5 Y-axis 95mm (+50 to -45) for upper turret 1 set 1-6 Upper V16 (turning & milling) + Lower V16 (turning & milling) Radial turret (No tool holder included) 1 set 1-7 Rotary tool drive motor, PREX 5.5/3.7kw (2 min/count) 2 set 1-8 Rotary spindle speed 45-6,000 min-1 2 set 1-9 Coolant supply system, 0.8kw x 3 sets pump motor 1 set 1-10 Work light, fluorescent lamp 1 set 1-11 Totally enclosed guard 1 set 1-12 Door interlock 1 set 1-13 Chip pan, side chip disposal type 1 set 1-14 Foundation washers and leveling jack screws 1 set 1-15 Machine lifting hooks 1 set 1-16 Chuck auto open / close with confirmation 2 set 1-17 Chuck air blower 2 set 1-18 Lubrication monitor B-1 1 set 1-19 CE mark and EMC 1 set 1-20 Application for IEC standard 1 set 1-21 Double chuck operation pedal 2 set 1-22 Synchronized tapping (for LT2000EX-M) for Milling rotary tool 1 set 1-23 OSP-P200LA CNC Controller with 15" colour display, touch panel 1 set 1-24 OSP-P200LA 3D-M-E kit specifications 1 set *Multitasking machines Coordinate conversion (1 set) *Multitasking machines Profile generation (1 set) *Program storage Standard: 2GB (1 set) *Operation buffer Standard: 2MB (1 set) Itsdpfxey Rnbdj Alxsk *Real 3D simulation (1 set) *Cycle time over check (1 set) *Load monitor (spindle, feed axis) (1 set) *NC operation monitor (incl. counter and monitoring function) (1 set) *Cycle time reduction function (1 set) *Variable spindle speed control (1 set) 1-25 Pitch error compensation X + Ys + Z 1 set 1-26 Inch / metric switchable function 1 set 1-27 Workpiece jump out detection 1 set 1-28 Status indicator lamp (2-layer lamp) instead of status indicator in 3D-E kit 1 set 1-29 Electrical power source application to suite local power source at each countries (CE transformer) 1 set 1-30 Chuck open/close during spindle rotation (LT-Standard) 1 set 1-set of tools - see last photo

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details Itedpsy Avg Esfx Alxsk • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1124343, travel distance X-axis: 1,060 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,800 kg, total height: 2,570 mm, total length: 4,000 mm, total width: 2,600 mm, table width: 630 mm, table length: 1,372 mm, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HAAS VM-3 CNC Vertical Machining Center – 2015 Price: €36,900 + VAT For sale is a HAAS VM-3 CNC Vertical Machining Center, manufactured in 06/2015. The machine is currently connected and operational and can be inspected and demonstrated under power by prior appointment. Technical specifications Manufacturer: HAAS Automation Model: VM-3 Year of manufacture: 06/2015 Serial number: 1124343 CNC control: HAAS Classic Control Software: M18.24B X-axis travel: 1,016 mm Y-axis travel: 660 mm Z-axis travel: 635 mm Maximum spindle speed: 12,000 rpm Spindle taper: 40 taper Automatic tool changer: 24 positions Power supply: 354–488 V / 3-phase / 50–60 Hz Equipment / Options TSC – Through-Spindle Coolant HSM – High Speed Machining Renishaw workpiece probing system Tool measurement / tool setting system Automatic tool changer Chip removal system Programmable coolant Coolant system with filtration Machine data from CNC control Run Time: 14,870 hours Tool Changes: 117,359 Power Ons: 2,608 The machine is well suited for precision CNC milling, tool and mould making and demanding 3-axis machining applications. Isdpjzt Nu Uefx Alxetk The machine is offered for sale as a used machine. Inspection, functional testing and demonstration under power are available by prior arrangement. Location: Slovenia, EU Additional information, photos and a video of the machine in operation are available upon request. On-site inspection can be arranged by appointment.