Front loader forklift 2022, 3.5 tons

TCM diesel FD35T3C

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a Nedpsvf E Avjfx Advecp bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic flow pack machine for packaging products—regardless of their length—in a full wrap with no film overlap. Product feeding is carried out via a conveyor belt, which simultaneously folds the product into a centre-folded film using a forming shoulder. Product indexing is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted to different product widths. Longitudinal sealing is accomplished by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical Specifications - Cross sealing bar: 450 mm - Film: centre-folded film, approx. 12 - 80μm - Film roll outer diameter: max. 400 mm - Film roll width: max. 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Passage height: 200 mm - Working height: 780 – 930 mm - Power supply: 400 V three-phase current, 50 Hz with protective earth Nodpfxjw U A Eqe Advscp - Rated power: 3.5 kVA - Rated current: 5.1 A Tunnel passage width: 650 mm Tunnel passage height: 200 mm Viewing and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: used, functionality: fully functional, machine/vehicle number: FN 4529291, Year of construction: 2013, operating hours: 4,034 h, load capacity: 4,500 kg, lifting height: 5,270 mm, fuel type: diesel, mast type: triplex, fork length: 1,500 mm, drive type: Diesel, Diesel forklift Chassis number: FN 4529291 Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic Condition: Refurbished without warranty Technical Condition: Very good Front tires type: Superelastic Front tires size: 300-15 Front tires condition: New Rear tires type: Superelastic Rear tires size: 225-15 Ncjdpswruqbjfx Advop Rear tires condition: New Description: incl. new UVV inspection Sideshift, 3rd valve, Subject to prior sale

Condition: reconditioned (used), Year of construction: 2014, operating hours: 24,967 h, functionality: fully functional, machine/vehicle number: 004283-0030, pressing force: 122 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, warranty duration: 24 months, year of last overhaul: 2026, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC120s (90kW) with crosswires. Ncsdpfx Aoxcir Ejdvop At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2024, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Ncsdou Th D Ropfx Advop Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total length: 5,500 mm, total height: 2,000 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 400 mm, product width (max.): 650 mm, compressed air connection: 6 bar, film width: 650 mm, Manufacturer: Kallfass Verpackungsmaschinen GmbH Model: Super Wrap 650 De Luxe In-Line Bundling Machine Year of manufacture: 2009 Dimensions: approx. 3160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical specifications: Film: Flat film, up to approx. 120 µm Film roll width: max. upper 650 mm, lower 620 mm Working height: 815 - 915 mm Passage width: 650 mm Passage height: 100 - 400 mm Nodpfexxlhnex Advecp Power supply: 400 V three-phase Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle This particularly versatile bundling machine operates with two flat film rolls. Product infeed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and therefore maintenance-free. Film rolls are simply placed, and film feeding is motor-driven. Manufacturer: Kallfass GmbH Model: Shrink Tunnel Standard 650 NT Year of manufacture: 2009 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 400 mm Tunnel outfeed, extended: approx. 500 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 26.5 kW Rated current at 400V: 38.5 A in stand-alone operation Powerful, universally applicable shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings underneath for precise control of hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculating air system, tunnel hood with additional double-chamber system, and significantly improved all-round insulation ensure energy-efficient operation. Equipped with infinitely adjustable rod chain conveyor. Inspection and demonstrations are possible at our premises by appointment. Function guarantee, no warranty.

Condition: used, Year of construction: 1985, pressure 100 t distance between columns 1250 mm stroke 1035 mm table surface area 890 x 1280 mm distance table/ram, max. stroke up, adjustment up 1035 mm table height over floor 630 mm ram surface 1000 x 1200 mm Ncedpfxjvuumce Advep side window 700 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 3,8 x 3,9 m with swivelling ram, movable table, inclining table, ejector in table, hydraulic ram interlocking press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 2014, operating hours: 13,993 h, Type of fuel: Diesel Empty weight: 4.400 kg Dimensions (LxBxH): 240 x 120 x 228 cm Lifting capacity: 2.500 kg Lift height: 332 cm Fork dimensions: 1.400 x 950 mm - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No Ncedoxcaq Eepfx Advsp - Serial number: FN466939 - Operating hours: 13993 - Lifting capacity: 2500kg - Lifting height: 3320mm - Overhead clearance: 2280mm - Free lift: 0mm - Fork length: 1400mm - Maximum fork width: 950mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage, Side-shift - Options: Half cabin, Radio, Work lights, Heating - Mast: Duplex - Drive: Diesel - Motor brand: Mitsubishi - Transport dimensions: 2400mm x 1200mm x 2280mm (l x w x h) - Transport weight [kg]: 4400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 25,504 h, load capacity: 5,000 kg, mast type: simplex, Equipment: sideshift, Used Jungheinrich DFG S50s forklift. - Rated capacity: 5,000 kg - Year of manufacture: 2015 - Operating hours: 25,504 h - Full cabin Nodpfx Aexupqxodvscp - Side shifter - Immobilizer with chip

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,154 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,100 mm, power: 37 kW (50.31 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tires type: Solid rubber Front tire condition: 80 - 100% Rear tires type: Solid rubber Rear tire condition: 80 - 100% Description: Diesel forklift KOMATSU FD25T-16R - - 2.5 ton lifting capacity - - Sideshift - - Triplex free lift mast - - Height 2.10m - - Lift height 4.70m - - Year of manufacture 2008 - - 5,154 operating hours according to meter - - 4-cylinder Komatsu diesel engine 50 HP - - solid rubber tires approx. 90% - - Front working lights - - mechanical hydraulic levers - - new seat will be installed Sideshift, Nedpeyrv A Rofx Advecp 3rd valve, rear working light, front working light,