Used Vsc for sale (182)

Year of construction: 1995, condition: good (used), The model VSC will make segents, slabs and square or rectangular strips from a variety of food products including Carrots/pickles/zucchini , potatoes/and many other food products machine can optional be delivered with Infeed V-belt Podpfxjfxxlyj Ab Isgw as-is or tested and set to customer needs.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 100226, The submission of a bid obligates you to collect on time in week 1 or week 2 of 2026! MACHINE DETAILS Total weight: 10,000 kg Electrical connection Mains type: 3~ Frequency: 50 Hz Operating voltage: 400 V Psdpfexzt R Nex Ab Iegw General control voltage: 24 V Valve control voltage: 24 V Connected load: 36 kW Rated current: 56 A Main fuse: 80 A Lighting connection: 24 V Lighting connection power: 18 W

Condition: good (used), Year of construction: 2001, M01.43870 frequency 50 Hz voltage 400 V 24 V Pgsdpforc Ip Sex Ab Iow connected load 48 kW rated current 63 A control Siemens 840 D turning diameter 250 mm turning length 100 mm weight of the machine ca. 7,5 t turning length external / innen 100 mm workpiece length - min. 29 mm workpiece length - max. 100 mm

Condition: new, Year of construction: 2026, control Siemens Sinumerik 828 hydraulick chuck 812mm Pgodpfjd I Ip Isx Ab Isw max. swing diameter 1250mm max. turning diameter 1150 mm

Condition: good (used), Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, chuck outer diameter: 250 mm, feed length X-axis: 680 mm, feed length Z-axis: 200 mm, power: 39 kW (53.03 HP), rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, controller manufacturer: Siemens, controller model: 840 DS, input voltage: 400 V, coolant supply: 6 bar, nominal power (apparent): 45 kVA, Equipment: rotational speed infinitely variable, type plate available, EMAG VERTICAL SINGLE-SPINDLE TURNING AND GRINDING CENTER Podpfx Ajlfduieb Isgw EMAG - REINECKER VSC 250 DS Used, year of manufacture 2015 Control: Siemens 840 DS Condition: Used machine in good condition Operating hours (approx.): 35,000 Program run time (approx.): 22,000 hours Operating voltage: 400V Air connection: 6 bar Total power requirement: approx. 45 kVA Cooling unit: water/water Machine dimensions without peripherals (L x W x H): approx. 3200 x 1900 x 2650 mm CYLINDRICAL GRINDING Integrated motor grinding spindle with max. speed 45,000 rpm and max. output 18 kW Touch dressing for ceramic CBN grinding wheels Vertical CNC turning and grinding center Automation / Gantry: EKF basket stacker cell as raw/finished parts buffer for baskets 400 x 600 mm on floor rollers 3 basket stacks enable uninterrupted operation even during basket changes, loading/unloading via loading gantry The machine is well-maintained and EMAG serviced. The production process includes pre- and finish machining of the bore and end faces by hard turning the face surfaces, as well as turning the diameter/bore followed by bore grinding. No driven tools Viewing under power is possible by appointment. Dismantling and loading of the equipment are to be carried out by the buyer. Price and further details on request / special price All technical details subject to error/typos. Sale only within EU countries.

Condition: used, Year of construction: 2011, turning diameter: 530 mm, controller manufacturer: SIEMENS, controller model: 840 D, number of spindles: 1, CONTROLS .. CNC controls SIEMENS 840 D BASIC FUNCTIONS .. design principle: vertical spindle .. number of spindles: 1 .. number of x/z slides: 1 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 1 WORKING RANGE TURNING .. turning diameter (max): 530 mm .. worpiece length max.: 200 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. c-axis: yes X/Z SLIDE Psdoxt Dkwjpfx Ab Ijgw .. tool fixture: Turret .. number of tool positions (total): 12 .. - rotation speeds (max): 8000 /min ELECTRICAL SPECIFICATIONS .. total power consumption: 71 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 9500 mm .. space requirements -front/back-: 5000 mm .. total height: 4200 mm .. total weight approx.: 13500 kg - Axes: X / Z / C spindle / A turret / including life tool - The machine features a VDI 50 turret with 12 positions. - Feed roller conveyor with pickup station - 20 bar internal cooling

Condition: excellent (used), Year of construction: 2009, operating hours: 67,343 h, functionality: fully functional, All data will be provided upon request regarding this listing. The machine is dirty. Up until July, the machine delivered top tolerances at MAGNA POWERTRAIN and is otherwise in fully functional condition. Pgodjxl Ah Sopfx Ab Ijw

Year of construction: 2009, condition: used, Mepac heavy duty vertical bagging machine for bulk productions. Pgedpfx Asxt Ib Hjb Ijw

Condition: used, Year of construction: 1994, weight je 6 t 2 ja ja control Siemens Pgsdeu T Sfhopfx Ab Iow

Condition: new, Year of construction: 2025, Siemens control Hydraulic chuck diameter: 610 mm Max. swing diameter: 950 mm Max. turning diameter: 850 mm Max. turning height: 800 mm Pedpfxoc Ryure Ab Ijgw Max. workpiece weight: 1800 kg Working travel (X axis): 800 mm Vertical travel (Z axis): 880 mm Chuck speed range: 50-1800 rpm Max. rotation speed of driven tools: 3000 rpm Rapid traverse – X axis: 20 m/min Rapid traverse – Z axis: 20 m/min Automatic tool changer, 16 positions in the magazine Taper: SK50 Worktable drive: 37 kW Driven tool drive: 7.5 kW (option 11 kW) Total connected load: 60 kVA Space requirements (LxWxH): 4300x2450x4450 mm Net machine weight: 18,000 kg Fixed ram on a movable crossbeam Tool changer outside the working area Spindle with taper clamping

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 200 mm, spindle speed (min.): 6,000 rpm, overall weight: 6,500 kg, power: 40 kW (54.38 HP), year of last overhaul: 2023, Equipment: documentation/manual, Both machines form a single unit. Year of manufacture: 2003, fully functional and still in operation. See photos. The machines are equipped with a chip conveyor serving both machines. A coolant tank was subsequently installed. Pgedpfexq Aruex Ab Isw Accessories include various holders, jaws, and one new AGW. The machine can still be inspected under power and in operation.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 83,799 h, functionality: limited functionality, feed length X-axis: 685 mm, feed length Z-axis: 200 mm, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 315 mm, rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, turning diameter: 400 mm, total length: 5,200 mm, total height: 3,282 mm, total width: 6,300 mm, rotational speed (max.): 4,000 rpm, torque: 460 Nm, overall weight: 10,000 kg, controller model: Siemens 840D, control type: CNC control, Equipment: cooling unit, For sale: EMAG VSC400, year of manufacture 2006. Equipped with Siemens 840 D control system. Pgodpfsw Dyziox Ab Iew Features: - Infeed and outfeed conveyor (O-type belt) - Pneumatically controlled transfer unit - Stamping unit - Chip conveyor (ejection to the left) - Coolant system - Tool turret 12x VDI40 Known defects: - Loading hatch - Interior lighting - Z-axis only usable in reduced rapid traverse (working feed unaffected) The machine is powered up and can be inspected.

Condition: good (used), Year of construction: 2004, Control: Siemens 840 D Travel: X = 2000, Y = 700, Z = 750 mm Pendulum machining: X = 2 x 700 mm Adapter: SK 50 DIN 69871 A Tool changer: 30-station Speed range: 30 – 4000 rpm Hollow shaft motor: water-cooled Power rating: 75 kVA Weight: approx. 19 tons Accessories: Pgedpfewlt Rmjx Ab Iow -Electronic handwheel -External belt filter system 800 l, 40 bar -Hinged belt chip conveyor -Table clamping area: 2750 x 750 mm -2 hand guns -2 work area lights Including loading onto a truck

Condition: good (used), Year of construction: 2002, Machine type: CNC Lathe Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Serial number: M02.43446 Year of manufacture: 2002 Psdekyrwwopfx Ab Isgw Available immediately Ex site for self disassembly Optionally we can offer dismantling and loading

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Podpfsia Rtdox Ab Iogw Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, Year of construction: 2025, Control Fanuc 0I-TF chuck diameter 380 mm Max. swing diameter mm 850 Max. turning diameter mm 750 Pjdpfx Abog Ix Rfe Iegw Max. workpiece height mm 700 Max. workpiece weight kg 1300 Z axis mm 620 X -axis mm -55, +425 ATC with 12 positions output kW 16/24 torque Nm 4195 place requirements mm 3205X2330x3500

Condition: used, Year of construction: 2001, Offered is a vertical single spindle pick up turning machine EMAG VSC 250 built 2001. The machine is equipped with a conveyor belt (O-Type) that runs through the machine. The automation belt is loaded with workpieces at the front of the machine. The work area has one working spindle and one turret with 12 tool positions. Other accessories such as a chip conveyor, coolant equipment or independent extractor unit are not included in the advertisement. The machine was taken out of service a few years ago. After inspection, the VSC 250 is fully functional and in good condition, as can be seen in the pictures. The machine has been completely cleaned and repainted. All control cabinet components and cables are still in their original condition. COTROL Siemens Powerline TECHNICAL DATA workpiece diameter: max. 200 mm workpiece height: max. 150 mm swing diameter: 250 mm X-stroke: 685 mm Z-stroke: 200 mm MAIN SPINDLE Pgodpfx Astrwdtjb Ijw power: 28 kW speed: max. 6000 rpm TOOL CARRIER 1x disc turrets, 12x D40 without driven tools The machine is sold without any warranty claims. Delivery time of the machine on request.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,284 h, functionality: fully functional, feed length X-axis: 685 mm, feed length Z-axis: 200 mm, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 250 mm, rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, total length: 3,100 mm, total height: 2,650 mm, total width: 4,000 mm, rotational speed (max.): 6,000 rpm, torque: 460 Nm, overall weight: 7,800 kg, controller model: Siemens 840D, control type: CNC control, Equipment: cooling unit, For sale is an EMAG VSC250, year of manufacture 2008. Equipped with a Siemens 840 D control system. Features: - Infeed and outfeed conveyor (O-belt) - Pneumatically operated transfer unit - Stamping unit - Chip conveyor (ejection left) - Coolant system - Tool turret 12x VDI40 The machine is powered and available for inspection. Podpfxjw Dyqdj Ab Ijgw

Year of construction: 2002, condition: excellent (used), X-4.000 / 2x1.750 , Y-900 , Z-700 ,SK 40 , 60-6.000 U/min , 2 Werkzeugwechsler für 72 Werkzeugaufnahmen, Siemens 840 D , Heidenhain Meßsystem , 3D- Meßtaster Renishaw , BLUM - Werkzeugbruchkontrolle , Pedpfx Abegb Rq Ss Iogw Späneförderer , Bandfilteranlage

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 105488, Technical data: Chuck diameter max. 250 / 315 mm Swing diameter 350 mm Workpiece diameter max. 250 mm Traverse path: X-axis:745 mm Z-axis: 300 mm Pedjwfgzlspfx Ab Isgw Loading times: Loading times (depending on workpiece) s 4 - 6 Main spindle: Spindle flange DIN 5502: 6 Spindle bearing, front through. Max. 110 mm Speed max. 5500 min. Disc turret: Number of tool holders: 12 Shank diameter: 40 mm Driven tools Maximum power: 8,5 kW Speed: max. 6000 min Turret swivel time: 0.3 s Control: Bosch Rexroth MTX

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Podpfx Ast Hxa Tjb Iogw Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2012, turning diameter 400 mm swing diameter 420 mm x-travel 850 mm z-travel 315 mm spindle head DIN 55026 - Size 11 spindle bearing diameter 140 mm turning speeds max. 4000 U/min tool turret 12 times C5 Capto rapid traverse x + z axis 45 / 30 m/min feeding force 11 kN total power requirement 58 kW weight of the machine ca. 9 t dimensions of the machine ca. 9,5 x 4,5 x 3 m Pgodpfxsvxwx Aj Ab Ijw Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available

Year of construction: 1999, condition: ready for operation (used), There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation. Pgodpfxjm H Urhj Ab Iow

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 2841823, Maximum workpiece diameter: 250 mm Maximum workpiece length: 175 mm Maximum chuck diameter: 315 mm Axis travel: X-axis: 860 mm Z-axis: 200 mm Rapid traverse: Pjdpfov U Emtex Ab Iegw X-axis: 45 m/min Z-axis: 30 m/min Main spindle speed: up to 4500 rpm Main spindle power: 28 kW Control system: SIEMENS SINUMERIK 840Dsl Tool turret: 12 positions Maximum workpiece weight: 6 kg

Year of construction: 2014, condition: like new (used), machine/vehicle number: 105488, Technical data: Chuck diameter max. 250 / 315 mm Swing diameter 350 mm Workpiece diameter max. 250 mm Traverse path: X-axis:745 mm Z-axis: 300 mm Loading times: Loading times (depending on workpiece) s 4 - 6 Main spindle: Spindle flange DIN 5502: 6 Spindle bearing, front through. Max. 110 mm Speed max. 5500 min. Disc turret: Number of tool holders: 12 Shank diameter: 40 mm Driven tools Maximum power: 8,5 kW Pjdpfsfyaaiex Ab Isgw Speed: max. 6000 min Turret swivel time: 0.3 s Control: Bosch Rexroth MTX