Dyeing Machine

Then/ Fongs AFS 50/ AFT 225/

Condition: used, approx. 15t available Iedpfxedc A Sie Aqpetg

Condition: not inspected (used), Hydromat HW25-714 Manufacturer: Pfiffner serial number: 5.07.021-1 (4,2m) number of pieces produced so far: approx. 7.800.000 pcs. Itjdpfx Aqei Ewtuepog footprint: 9m x 4m + control cabinet

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. Itodpfx Asr Ix Igsqpsg All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: ready for operation (used), Year of construction: 1986, A Brückner stenter frame, perfectly suited as a spare parts dispenser, is available. Steam pressure: 2 bar, air pressure: 10 bar. On-site inspection is possible. Itedpfx Aqowhy S Nspsg

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Itsdpfxov Ng E Te Aqpeg Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery

Condition: used, Year of construction: 2021, functionality: fully functional, CMS 530 ki Multi Gauge-Type 816 000 E3,5.2 - 3 System - 50" - 20 Yarn Isdpfx Aqoyaypdepotg 26 units available for this model

Condition: used, Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43246, working width: 300 mm, Possible Technical Specifications (based on comparable models) Type: Single jersey circular knitting machine with up to four needle tracks. Cylinder diameter: 26" to 48". Gauge (fineness): E14 to E60. Number of feeders: 3.2 per inch (e.g., 96 feeders with a 30" diameter). Speed: Up to 25 revolutions per minute at a 30" diameter. Speed factor (SF): 990. Structures: Single jersey, piqué, double piqué, two-thread fleece, and single jersey with plating. Applications: Underwear, nightwear, outerwear, sports and leisurewear, swimwear, automotive, and mattresses. Supplied complete with accessories. Including enclosure Additional information: Length (machine): 3000 mm Width (machine): 3000 mm Height (machine): 2800 mm These values represent the external dimensions of the machine itself. Capacity (cylinder diameter): 813 mm Itedpjwt Rfdjfx Aqpog Number of needles: 2808 pcs Needle Ø: 0.91 mm Number of yarn spool holders: 100 pcs

Condition: used, functionality: unexamined, machine/vehicle number: 33509, working width: 300 mm, Complete with accessories Possible technical specifications (based on comparable models) • Type: Single jersey circular knitting machine • Diameter: 15″ to 36″ • Gauge: E20 to E28 • Number of feeders: 120 at 30″ • Speed: Up to 50 revolutions per minute at 30″ • Speed factor (SF): 1500 • Structures: Suitable among others for two-thread fleece and piqué • Applications: Sports and leisurewear, underwear, nightwear and outerwear • Special features: • 50% less friction thanks to ‘relative technology’ • Lower energy consumption • Mayer Cleaning System (MCS) for reduced oil consumption and longer needle life • Automated knit-on aid for efficient restart after yarn breakage Additional information: Length (machine): 2 400 mm Width (machine): 2 400 mm Height (machine): 2 550 mm Isdpfxowt Rahj Aqpotg These values indicate the external dimensions of the machine. Capacity (cylinder diameter): 660 mm Number of needles: 1,944 units Needle diameter: 1.06 mm Number of yarn cone holders: 83 units

Condition: refurbished (used), Year of construction: 2024, Working width 2800 mm Roller width 3000 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - ebonit 100 Grad shore Pressure line 50 N / mm Pressure total 16 to Cloth guiding system for woven fabrics geb. Breitstreckwalze Liquor trough with guide roll + Verdrängerkörper Drive side nach Auftrag Iedpot H Sm Hefx Aqpotg Operting side nach Auftrag Drive shaft dia 80 mm ohne Machine will be completely overhauled before delivery, we supply with warranty. (Photo shows a similar machine after overhauling in delivery-status), supply of a suitable drive for adaptation into a plant is possible, extra price,

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 261 kW (354.86 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,651 kg, input voltage: 400 V, total width: 2,260 mm, total length: 2,410 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30RBM 260 0014 PE 261 KW Itsdpfx Aqexgc I Ijpog Cooling capacity: 261 kW / 74.21 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum. Compressors: 4 pcs. Danfoss SH295A4ACE (scroll) Type of refrigerant: R410А Number of fans: 4 pcs. Hydraulic module: 1 pcs. water pump Lowara 00PPG000495200A, expansion vessel. Dimensions: 2.41x2.26x2.3 m. Weight: 1651 kg. Working hours: 1804/1756/1835/1723 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.