Sheet metal deburring machine

Timesavers Serie 42-WRB

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Fedpfx Asudb R Ijg Repb Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Weight: 6200 kg

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals Fpodou S Ahqopfx Ag Rsb metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: reconditioned (used), Year of construction: 2017, operating hours: 3,862 h, functionality: fully functional, Used machine Year of manufacture: 2017 General Specifications: Max. working width sanding belt unit: 1350 mm Sanding belt dimensions (W x L): 1380 x 1900 mm Outside brush diameter: 350 mm Fpedpfx Aow Dzytjg Reb Table opening: 0 – 100 mm Minimum workpiece size: 50 x 50 mm Feed speed, frequency-controlled: 0.5 – 8 m/min Electricity 1st Unit – W – sanding belt: 11 kW 2nd Unit – RB – rotary brush unit: 1.5 kW Brushes: 4 x 1.5 kW (6 kW) Feed motor, frequency controlled: 2.6 kW Vacuum pump: 15 kW Electrical connections: 400 Volt Frequency: 50 Hz Compressed air only for sanding belt unit Required air pressure: 6 bar Consumption: 160 l/min Dust extraction at 100 mm WS Sanding belt unit: 2000 m³/h Vacuum pump: 1500 m³/h Weight: approx. 6000 kg Includes one set of brushes and starter set of sanding belts. New extraction system optionally available. Machine has been technically overhauled (conveyor belt and bearings are new, value approx. €20,000) Immediately available.

Condition: excellent (used), Year of construction: 2008, Technical Data: Working length: 3550 mm Stand width: 3050 mm Press force: 230 tons CNC control: CYBELEC ModEva 12S controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke: 550 mm Throat depth: 410 mm Mounting height: 745 mm (extra high) Table width: 140 mm Working height: 1065 mm CNC-controlled crowning CE marking Motor power: 42 kW Dimensions (length x width x height): approx. 4650 x 2350 x 3100 mm Weight: approx. 25 tons Fpedowntqxspfx Ag Rob Accessories: 2 pcs. CNC-controlled bending aids, front side 1 pc. CNC-controlled bending aid, rear side!!! The seller is not liable for typing or data transmission errors. The machine corresponds in appearance, technology, and wear to its age; used machines are sold without any warranty.

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Fsdpon Arm Tofx Ag Rjpb Specifications Spectral range: 1600-2400 nm. Pixel pitch 8nm Optical resolution 11nm Scattered light

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: S36-0685, (engraving, cutting) With Rip and extraction system (S. No.: 01422-11122) Laser type: CO2 Working area (W x D): 813 x 508 mm CO2 laser power: 80W, 120W Max. engraving speed: 3.55 m/s Operating mode: Optimized modes, including raster, vector and combined Fodpfsxcalvex Ag Ropb

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Fsdpfx Aovd Dfteg Rjpb Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Coating system Hymmen CombiCoater ELX-S 1400 with UV dryer. * Technical data will follow shortly Fedpfx Agjlf H Tce Rspb * For self-dismantling and collection.

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Fpjdod E A I Iepfx Ag Rob Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: new, Year of construction: 2023, Orbital sanders are made for sanding straight, curved and shaped pieces with a round or oval section etc. and with a variable thickness for chair, table, bed and associated items. The machines main features are: Frame in electro-welded steel - Rotating disk with 2 opposing abrasive belts driven by an electric moto, with a revolving movement around the workpiece - Electrical control panel - 2 Adjustable workbenchees (inlet - outlet) - Possibility of fitting 2 automatic workpiece-feeding units with adjustable speed by means of inverter. Abrasive belts: 80 x 1260 mm Min-max. workpiece diam.: 10-100 mm (fi) Min. curvature radius: 200 mm Dimensions: 760x1000x1800 mm 3 pieces. Fpedjqnufvspfx Ag Rsb Camam, Comec, OMEF, Brusa di Garboli