Horizontal twin-column mitre band saw with feed

TRENNJÄGER TEBA 432 A

Year of construction: 2008, condition: excellent (used), GLASS VAS VSM 1000 ID.NO. 2416 Prjdeixz Tnspfx Ab Isd GLASS VAS VSM 1000 liter chopping / processing machine year mod 2008. Suitable for making mayonnaise, hummus, sauces, pastes, dairy products and much more! Available for immediate delivery!

Condition: new, Year of construction: 2024, Container turning device 10 tons lifting capacity Double drive Synkron Axle distance steplessly adjustable by means of thread Predpfx Ajifk Rbsb Ied speed infinitely variable with foot remote control diameter from 300mm to 3500mm Roll width and diameter 120 x 270mm Speed 200 - 1200 mm/min.

Condition: excellent (used), Year of construction: 2008, Hello, Machine in very good condition. Prodpfx Aen Nykweb Iod TM-SERVICE is a company specializing in the service and sale of poultry machinery. We install equipment anywhere, ensuring that the machines we sell are thoroughly inspected and ready for efficient operation.

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg Pjdpfef Eywwsx Ab Ierd

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Pedpfxof Epzns Ab Isrd Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: like new (used), set, packed in wooden box, screw and barrel for 150 mm extruder, Psdpfx Ajdm Aghsb Isrd grooved feeding bush, screw with shearing and mixing element

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 175 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,320 mm, power: 36 kW (48.95 HP), fork carriage width: 1,470 mm, fork length: 1,200 mm, empty load weight: 4,350 kg, total length: 3,084 mm, drive type: Diesel, construction width: 1,350 mm, All-terrain forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostat Speed class: 20 Technical condition: Very good Front tires Type: Pneumatic Front tires Size: 300-15 Front tires Condition: 80 - 100% Prodou Dyixjpfx Ab Iod Rear tires Type: Air Rear tires Size: 7.00-12 Rear tires Condition: 80 - 100% Description: The MSI 25 is a versatile mast truck and unique in its kind. It can be used in the wood and paper industry, in the recycling sector, in logistics applications, etc. Whether in the industrial building, in the yard or on light terrain, the hydrostatic transmission combined with the powerful engine and two large diameter drive wheels enable precise and smooth operation. This machine ensures daily productivity gains. For efficient maneuvering, the MSI 30 has a steering axle with integrated cylinder, which gives it a very tight turning radius. Thanks to the numerous attachments available, the MSI 30 is extremely versatile and is suitable for lifting, loading, unloading and storing long loads. It has a lifting capacity of 3.0 t. Sideshift, 3rd valve, semi-cab, full free lift, CE certificate, Front and rear lighting

Condition: excellent (used), Year of construction: 2005, pipe Ø 25 – 60 mm wall thickness 1 - 4 mm coil Ø max. 3.000 mm coil weight max. 10 t finish pipe length 3.600 - 8.500 mm round pipe Ø 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm speed max. 100 m/min working direction left → right The line consists of: decoiler crop shear welding table edge trimmer with scrap cutter scrap conveyor strip edge preparation Pjdpjuc Shusfx Ab Isrd entry table forming part internal scraper/outer scraper cooling zone calibrating part testing and length measuring cutting ejector for reject pipes blow-off station oiling station bundle station banding station bundle extraction electrics

Condition: used, tool clamping area 0 mm weight 0 t Pjdpfx Abjd Ihcao Ierd Titan coated carbide rough milling and finish milling cutter with following diameters and different quantities available: Ø 9,7 - 11,7 - 13,7 - 15,7 - 17,7 - 19,7 - 20,5 - 21 mm cutter up to incl. 15 mm 15€/pc. from 15 mm up 20€/pc.!

Condition: good (used), Year of construction: 2007, Gildemeister lathe NEF 600 year of construction 2007 Heidenhain Plus control Turning diameter max. 600 mm Center distance 1.250 mm Swing diameter over bed 600 mm Cross stroke 320 mm Main spindle: Speed range - main spindle max. 3,000 min/-1 Spindle bore 90 mm Chuck diameter 320 mm Tool turret: Prsdpfx Abeucl Alj Ijd Number of tool positions 8 pos. Total power requirement 42 kVA Weight of the machine approx. 5.0 t Space requirement approx. 3.6 x 2.14 x 1.95 m Accessories: , flushing gun, Schunk lathe chuck 315 mm, Tailstock MK 5