Conveyor belt with plastic slats

trio-technik Z- FB 600/1900/500

Condition: ready for operation (used), Manufacturer: Jung Csdpfxjnr E Dxo Addjrk Type: HF 50 Magnet table: 450x175mm

Year of construction: 2021, condition: new, machine/vehicle number: 2021041406, Aluminium inclined conveyor belt with substructure dim: approx. 2000 + 2000mm Csdpfx Aog Ez I Hodderk Discharge height: 1600mm ( example ) Height of the horizontal area 200mm ( example ) Conveyor belt green, 2-ply especially cross-stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive, motor control optional stainless steel hopper - material feed

Condition: new, New device Crodpjd Tidxjfx Addek MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Example as shown: L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm External width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles for the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on swivel castors with brakes Side collecting plates in the infeed section Also available as an angled conveyor with supergrip belt and separator (see last two photos) Double roller separator with covered belt drive Covered with super grip Adjustable discharge chute

Condition: good (used), Manufacturer Jung Type HF 50 RD Control conf. Axis displacement X axis 500 mm Y axis 200 mm Z axis 400 mm Cjdpfsip Dnfox Addork grinding spindle Speed variable 1000-4000 RPM To belong Cooling oil system with belt filter settings. Variable speed Sony digital 2-axis Magnetic plate

Condition: new, Year of construction: 2025, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Csdpfx Adotqfhxedsrk Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: used, Year of construction: 1968, 450 mm Länge x-travel 500 mm Crsdpsqwpwzefx Addek workpiece height . mm

Year of construction: 1997, condition: excellent (used), General: Chip conveyor in good condition. The technical data can be taken from the pictures and type plates. Remark: The chip conveyor is in our stock and can be inspected Crsdpfx Ajittk Ejddjk and can be inspected under power. Dimensions (see sketch): A: approx. 400mm B: approx. 135mm (with funnel 275mm) C: approx. 700mm D: approx. 40mm E: - F: 285mm (belt width 205mm) G: approx. 1.460mm (with funnel 1.710mm) H: -

Condition: ready for operation (used), Injection mold for plastics. K60/156x196x9/1.1730II92 12 06 Crsdevi Ialjpfx Addok

Condition: good (used), GR. Grinding length: 500mm GR. Grinding width: 200mm Csdpoin Np Eefx Addjrk Table movement - longitudinal movement: approx. 600mm space requirement: 1800 x 1400 x 1650 mm approximate weight. 1500kg With cooling system

Condition: new, Year of construction: 2025, functionality: fully functional, Aluminum inclined conveyor belt with substructure including adjustable feet and machine feet to level uneven ground. - Feed height: 300 mm - Ascending section: 4,500 mm - Discharge height: 3,000 mm Design: Aluminum construction - Double reinforced profile 90 x 45 mm - Full-surface removal plate Drive roller + idler roller made of S235 steel, welded and machined Ø100 x 520 mm, crowned, shaft secured with clamping bearings. Drive: 0.55 kW slip-on gear motor, speed 0.3-0.5 m/sec Connection: 230/400 V, 50 Hz, protection class: IP54 Drive ready for connection to the motor terminal box (Commissioning must be carried out by a qualified electrician) Polyurethane conveyor belt DM 15/2 0+005 PU including sidewalls and cleats, PU industrial belt, matte petrol Conveyor belt width: 500 mm 2 sidewalls, 50 mm high, 25 mm wide, flush with the edges, high-frequency welded Belt material: 2-ply, particularly stable laterally 23 T40 cleats welded centrally, pitch approx. 400 mm Due to the sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width 450 mm, calculated as follows: (Top view) Transverse arrangement 25+450+25mm We always have various systems of this type in stock. The delivery time for a customized system is currently approximately 3-4 weeks, depending on the production effort. Our core competence lies in providing customers with exactly what they need. Crsdpsv Su Stefx Addok We work with our customers to develop customized, individual solutions and supply corresponding systems from our own production facilities. Please feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator All prices are net prices plus 19% VAT. All information is subject to change without notice, only while stocks last!