Heavy-duty transport vehicle 16 tons

unbekannt 6070/1325/H820 mm

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Dujdpfsvr Hgvsx Am Tow Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 251 h, load capacity: 8,000 kg, lifting height: 4,490 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, fork length: 2,400 mm, empty load weight: 16,850 kg, total length: 2,640 mm, drive type: Elektro, construction width: 2,140 mm, Electric 4-wheel forklift Load center: 900 Mast type: Triplex Condition: As good as new Technical condition: very good Front tires type: Non Marking Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Battery Volt: 80V Dsdpfexxdy Nex Am Tjuw Battery year of construction: 2020 Sideshift, Fork positioner, 3rd valve, 4th valve, heating, STVZO, full cab, full free lift, CE certificate,

Condition: ready for operation (used), Year of construction: 2024, A brand new AME belt filter system for continuous cleaning of cooling lubricants (e.g. emulsions, oils) using the gravity principle is available. Emulsion capacity: 150l/min, oil capacity: 90l/min, tank volume: 800l, machine dimensions X/Y/Z: approx. 1900mm/1000mm/1300mm, weight: approx. 410kg. Documentation available. On-site inspection is possible. Dedpfxevr Efko Am Teuw

Condition: good (used), functionality: fully functional, Year of construction: 2009, operating hours: 3,090 h, machine/vehicle number: A5GU35248, USED BOBCAT CRAWLER TRACK LOADER MODEL : T300 SERIAL : A5GU35248 YEAR : 2009 HOUR : 3090 Djdpfxex Tqmhj Am Touw

Condition: excellent (used), Control : Siemens Sinumerik 840D SL Accessories available: - various grinding wheel holders - Lifting pump for cooling lubricant - Various spare parts for machine, machine documents - Magnetic table 2000 x 250 mm incl. clamping hydraulics - Machine hours: 8,000 h (since 2018) - Table dresser: Dittel brand Duedoulghcspfx Am Tjw - Grinding head: manually swiveling Machine length 6.6 m Width 2.8 m Height 2.5 m Weight 14'000 kg Drives Siemens

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Designed for flexible packaging of industrial food products, chemicals, powders, granular materials, frozen foods, snacks, dried fruits, rice, pasta, coffee, cereals, legumes, sugar, salt, flours, pet food, pellets, fertilizers, and other similar products. High productivity, great versatility, and a maximum speed of 60 bags per minute when working with bags that are 40 to 250 mm wide and up to 400 mm long. Accepts film, PE, composite films, heat-sealable paper, and recyclable film. Incorporates a PLC with an OMRON touch screen, software control, Ethernet and WiFi communication, peripheral integration, and SCADA connection capability. Features a vertical and horizontal sealing system, servomotor, encoder, photocell, toothed blade, Linatex belts, round, oval, or rectangular forming tubes, and an IP65 electrical panel. The machine includes a feed conveyor belt and an output conveyor belt, operates at 400 V with a three-phase power supply and an installed power of 1.5 kW. Maximum power consumption is 7 kW, and compressed air consumption is 50 to 150 l/min. Dimensions are 1950 x 1240 x 2020 mm. Dodpfx Amsy Ui Dns Tsuw

Condition: good (used), Year of construction: 2011, functionality: fully functional, Accessories: Belt filter, magnetic separator, and various grinding wheel holders Dedpsxvqtwjfx Am Touw Grinding area: X 1000mm, Y 600mm, Z 550mm

Condition: like new (used), total length: 4,000 mm, total width: 2,500 mm, total height: 665 mm, color: blue, Operating conditions: The trailer is designed for use on level, paved surfaces in internal company transport. The trailer components are not designed for combined operation with multiple trailers in a train. Duedpfx Amjxrtqwo Tow Payload: 10 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or strip loads are only permissible upon prior notification. Loading area: Dimensions approx. 4000×2500 mm, loading height approx. 665 mm, loading surface covered with softwood planks, all-round edge protection. Main frame: Robust welded construction made of profile steel sections. Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and swapped from front to rear. Coupling height at towing vehicle approx. 350–600 mm (other coupling heights only permissible upon prior notification), towing eye according to DIN 74054, Ø 40 mm, drawbar drop guard according to accident prevention regulations (UVV). Running gear: Both axles steered, super-elastic tyres 21×8-9 (approx. 517×186 mm), wheel hubs with tapered roller bearings and lifetime lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,350 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 750 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426 M, total height: 3,150 mm, overall weight: 10,100 kg, spindle speed (max.): 24,000 rpm, tool weight: 8,000 g, number of axes: 3, This 3-axis MIKRON VCP 1350 was manufactured in 2000. It features a Heidenhain TNC 426 M control system, X-axis travel of 1350 mm, Y-axis of 900 mm, and Z-axis of 750 mm. The machine supports a maximum workpiece weight of 1,800 kg and includes a high-speed Step-Tec HSK-A63 spindle capable of 24,000 rpm. Ideal for precision machining with a tool magazine capacity of 46 tools. Contact us for more information about this machine. Additional equipment • High-speed precision machining capability Machine Benefits Technical Machine Benefits • Equipped with a automatic spindle orientation and high-speed spindle (24000 rpm) • Coolant system pressure: 30 bar (standard) / 40 bar (optional high pressure) • Tank capacity: 180 l (optional 600 l) • Direct drive ac motor • Measuring system: direct linear scales on all axes Duedpfx Amjyarz Ee Tow • Clamping surface: 1425 x 860 mm • Magazine capacity: 46 tools (standard), 92 tools (optional) • Max. Magazine load: 200 kg • Tool-to-tool change time: approx. 12 sec • Available for inspection Extra Information Machine still under power Dimensions Machine Depth 4130 mm

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Dsdpfx Amsxrtb Ns Tsuw Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.