Jaw Crushers

VDF Boehringer Bökimat 1800 x 1400

Condition: used, functionality: fully functional, Used asphalt mixing plant Ammann MEA 180 Mixing tower complete, Ammann mixer 4 t Drying drum Benninghoven, year of manufacture 2018 Burner Benninghoven, year of manufacture 2018 Filter unit Benninghoven, year of manufacture 2018, exhaustor 2018, chimney 10 dosing units with conveyor belt Control system in container Loading silo with skip hoist and winch Filler silos with screw conveyors and transfer elevator RC addition with drying drum and complete conveying technology Blsdpfx Aoywn Idjigek without bitumen section

Condition: excellent (used), functionality: fully functional, power: 735.5 kW (1,000.00 HP), Year of construction: 2015, Oil drilling rig National 80 UE 1000 HP Year of manufacture: 2015 Fully operational Bljdpfx Asx Nc Ddeigek

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate. Blodpfxewxmb Ej Aigek

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 1017, Used production line for blocks of concrete (and expanded clay). The line was used to produce concrete blocks using expanded clay. Bedpouc Tzvefx Aigolk From 2023-08, the line is no longer in operation, it has been preserved. Line of blocks in order: - 2 pcs. small silos (with vibro, with pneumo flaps). - Raw material supply conveyor to the weighing hopper. - Weighing hopper. - Raw material supply conveyor from the weighing hopper to the mixer. - Mixer FK Machinery (Poland, 2022, bucket capacity 1200 l, engine power 18.5 kW). - Conveyor for feeding the mixture from the mixer to the SIGMA 1000 vibro press. - Vibro press SIGMA 1000: Type mark: PIERRE ET BERTRAND SIGMA 1000 with automatic TELEMECANIQUE control Manufacturer: ADLER S.A.S. Route de la Bourde, 60360 CREVECOEUR LE GRAND, France Serial no./year of manufacture/year of renovation - 1017/1989/2009 Area on the board (palette): 1130 mm x 550 mm (long x wide) Height of products - max 250 mm - Production shelf. - From the production shelf, the production is transported by autoloader to the mechanism where the production is automatically reloaded from the production boards onto the pallets. Production boards are automatically returned to the vibro press. - Control board with programmer. - Electric switchboard. 2022 year of production Mold 200 x 185 x 490 with which we have been working for the last year. There are many other used Moulds. There are about 500 pieces production boards. There is no compressed air compressor. We can provide disassembly, assembly and equipment startup services.

Condition: excellent (used), Year of construction: 1993, CNG Tank Gas Methane Trailer Natural gas 200 Bar Manufacturer: SAMRO Bedst D Aptjpfx Aigolk Year: 1993 Tare: 6900 kg We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels.To discuss the possibilities, please contact us by phone or e-mail.

Condition: new, functionality: fully functional, Year of construction: 2026, 20T Premium Ramp, Usable Inner Width 2,5m – TM-GROUP, the Best Choice on the Market ⭐️ Galvanized drive-on grating! ⭐️ ✅ Specifications: - Manufacturer: TM-GROUP - Maximum load capacity: 20 tons - Inner ramp width: 2500 cm - ELECTRIC and manual height adjustment from 1m to 1.6m - Galvanized drive-on grating - Reinforced side railings on both sides of the ramp - Solid rubber transport wheels - Central forklift handle for easy repositioning - Adjustable slope angle and flap height - Dual reinforced support legs - Moving parts equipped with grease fittings - Ramp also includes a hand winch Bedpfx Aierp En Ajgjlk ✅ Drive-On Grating: Galvanized grating with anti-slip grooves. A safe and secure surface. Both forklifts and pedestrians are ensured the best possible grip and support. Competing ramps often feature drive-on plates covered with mesh. Our product includes the grooved grating – a far more durable solution, which allows dirt to fall through and prevents forklift slipping. ✅ Forklift Handle – installable on both sides: Convenient and quick attachment point for forklifts allows ramp transportation in all directions. Specially designed handle enables maneuvering even in confined spaces. ✅ Chain for connection with trucks, wagons, or stationary warehouse ramps: A solid steel chain is another advantage of our ramp, providing extra security and preventing any unwanted shifting during loading operations. ✅ Durable side barriers: Safety railings with the option to detach and install a frame/canopy (canopy available as an option). ✅ Electric height control: Smooth electro-hydraulic drive powered by a high-quality pump. The pump operates on 230V, so it can be plugged into a standard power outlet. ✅ Dual-Action Manual Pump: Hydraulic pump for height adjustment in case there's no access to electric power – supports lifting in both directions. A reliable solution for all working conditions. ⭐️ Available Variants: ⭐️ - Drive-on widths: 1700 cm, 2000 cm, and 2500 cm in Standard, Premium, and Premium Plus options - Mobile ramps with load capacities of 10 tons, 15 tons, 20 tons, and 25 tons - Grating thickness: 3 – 5 cm - Colors: red, blue, black, and green (custom colors available upon request) - Mobile ramp with tarp covering As a manufacturer, we can produce custom ramps based on your specific needs – various dimensions, load capacities, or special configurations. Looking for a solution you can’t find in the listings? Contact our specialist. Tags: Loading ramp, unloading ramp, dock ramp, mobile ramp, loading dock, transfer dock, mobile loading ramp, mobile transfer ramp.

Condition: used, mileage: 5,52,546 km, power: 353 kW (479.95 HP), first registration: 04/2015, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x2, wheelbase: 5,550 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 8,200 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Equipment = - Differential lock - Remote central locking - Lift axle - Towing jaw (Maulkupplung) Bjdpfxow Dr H Rj Aigelk - PTO (Power Take-Off) - Radio - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox = Remarks = HMF 8520 OK6 Scanreco radio remote control. 4 x hydraulic outriggers. 6 x hydraulic extensions. Winch: 2,500 kg. 4.48 m – 16,030 kg 6.33 m – 11,100 kg 8.23 m – 8,310 kg 10.23 m – 6,520 kg 12.33 m – 5,300 kg 14.51 m – 4,440 kg 16.75 m – 3,820 kg Adjustable fifth wheel. Stainless steel toolboxes. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tyre size: 385/65R22.5; Steering; Tyre tread left: 70%; Tyre tread right: 70% Front axle 2: Tyre size: 385/65R22.5; Steering; Tyre tread left: 70%; Tyre tread right: 70% Rear axle: Tyre size: 315/70R22.5; Twin tires; Tyre tread left inner: 20%; Tyre tread left outer: 20%; Tyre tread right inner: 20%; Tyre tread right outer: 20% Front axle 3: Tyre size: 385/55R22.5; Steering; Tyre tread left: 60%; Tyre tread right: 60% Weights Kerb weight: 25,390 kg Payload: 11,110 kg Gross vehicle weight: 36,500 kg Functional Crane: HMF Financial Information Price: On request Identification Model number: TGX 37.480 8x2-6 / HMF 85 t/m CR = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We strive to provide accurate information, but no rights can be derived from the texts provided.

Year of construction: 2016, condition: new, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Bledpfx Aogwlrdsigek Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ. 1) Bale shredder MHB: Special price from €24,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency inverter (FU) - this regulates the speed of the scraper bed. The bales are placed on the scraper bed and the feed of the shredder is activated. The shredder's tines tear the straw from the bale and fling it into the hopper. Ideally, the combination of a bale shredder and a straw shredder offers the best solution. Technical data, bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill, kW number of the straw mill). Without a straw mill, the bale shredder can process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (L x W x H) Shredder motor: 5.5 kW, 380 Volts Scraper bed feed: 0.75 kW, 380 Volts Dimensions: 3750x1730x2460 mm (L x W x H) Weight: 400 kg 2) Straw shredder MHZ 600 - 11/15 kW; immediately available Special price from €6,995 net Additional cost for the even larger straw shredder (18.5 kW): €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm hole size With star-delta switch, overload protection and 8 m power cord, ready for connection Discharge spout: 160 mm Throwing distance approx. 12 m Dimensions approx. 1600 x 1020 x 1360 mm (L x W x H) Weight approx. 240 kg --- Options at extra cost: Feed auger: + €970 net Cyclone separator (mounting by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: from €1,620 net Special shredder extension, 3 m *other sizes can be calculated + €9,750 net Briquetting press MPP 180 S; little used demonstration unit 70 mm briquette - up to a maximum of 100 kg/h from €39,700 net * larger machines on request --- Description: The muetek bale shredder has been developed for shredding round and rectangular bales of hay and straw. The shredder attached to the bale shredder shreds straw from all types of cereals, hay, corn and miscanthus. The muetek machines of the MHZ / MHB series are characterized by a robust construction and solid design. The muetek bale shredders of the MHB series are equipped with a chain conveyor, on which the straw bale is placed with a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredder rotor, and the feed speed is adjustable. The shredder rotor is equipped with several teeth, which tear open the straw bale. The straw separated from the bale is ejected. --- In principle, the machines work for dry source materials: - Straw - Hay --- Shredding hemp only works with a special shredder Additional cost approx. €9,720 net *depending on the design. Bedpfx Asb Nulhsigslk Shredding hemp does not work with the straw mill. Requirements for the source material: Moisture content max. 12%

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Blodpfsxl S Uhjx Aigok