Center Lathe

VDF- HEIDENREICH & HARBECK V3

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm Giedpfxstzf N Re Ad Uep -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm strip thickness: 0,5 - 3 mm blade shaft Ø: 180 mm Giodpfx Adsd Ha Iro Usp

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Godpfxjw Rm Dis Ad Ujip Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Weight: 6100kg

Condition: used, functionality: fully functional, turning diameter: 500 mm, turning diameter over bed slide: 500 mm, turning length: 2,000 mm, SUI 50/2000 – swing diameter 500 mm, turning length 2000 mm Gjdpfjw N D Trox Ad Ujip

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Gjdpswb Scmjfx Ad Ujip Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 Giodpeu Ix Dcefx Ad Ujp tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA Gsdpfx Aexp Rzbed Ujip With chuck, Multifix toolholder and digital readout.

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm 10000 rpm Giodpjwyblzofx Ad Usp Parts shown by hand not come.

Condition: used, turning diameter over bed 430 mm turning diameter over slide rest 230 mm turning length 1000 mm centre height 215 mm Godpfx Adsxwp Ens Ueip centre distance 1000 mm spindle bore 56 mm spindle turning speed range 19 - 2000 U/min total power requirement 7,5 kW weight of the machine ca. 1,9 t Accessories: 3-jaw chuck 250 mmø, 4-pos. tool post, solid steady

Condition: refurbished (used), Year of construction: 2024, ### Discover our selection of robust and precise bed milling machines! Are you in search of a reliable bed milling machine that boosts your productivity? Experience unparalleled precision and performance with our new and refurbished bed milling machines. Our machines offer X-travel distances from 1500-5000mm and are available with Heidenhain or Siemens control. With Y and Z travel distances up to 1200mm, you have limitless possibilities. Some refurbished machines are in stock and quickly available! Discover our extensive special accessories, such as universal heads, tool changers, and more, to make your bed milling machine even more versatile. Whether for complex workpieces or challenging tasks, our machines always deliver the best results. Trust in our years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Here is a selection of possible machine types, and we are happy to offer additional models or special machines upon request: TECHNICAL MAIN DATA: BFM Series including 15% BAFA subsidy and more! - X-travel: 1500-5000 mm - Y-travel: 1000 mm - Z-travel: 950 (opt. 1500) mm - Max. table load: 5000 kg - Spindle taper: 50 SK - Spindle speed: 3500 (5000 opt.) rpm - Spindle drive: 15/18.5 (22/26 opt) kW ACCESSORIES: Manual Universal Head, Siemens or Heidenhain Control, Linear scales in X-Y-Z axis, Chip Conveyor Screw execution front/rear, and more. Extensive SPECIAL ACCESSORIES available on request to make the machine even more productive. Currently available refurbished machines with warranty and BAFA subsidy, e.g.: - CORREA CF17D: HEIDENHAIN TNC-426, Travels (X/Y/Z): 2000 / 800 / 800 mm, manual milling head, and more. - CORREA CF25/25: HEIDENHAIN TNC-530, Travels (X/Y/Z): 2500 / 1000 / 1500 mm, automatic universal head UAD (all 0.1º) / 6,000 rpm, and more. - Additional models available on request Contact us now and explore the world of innovative bed milling technology! Our service for you: - Consultation and solution finding on-site - Organization of machine transport to your facility - Installation, assembly, commissioning, and ready-to-use handover Gedpspwn Hhjfx Ad Uoip - Financing and exploration of funding opportunities through KFW and BAFA, and more.