Paint-/ Driyingbox combined

Ventherm

Condition: new, Year of construction: 2026, total height: 3,000 mm, total length: 4,900 mm, total width: 2,400 mm, volume flow: 3.6 m³/h, type of input current: three-phase, power: 1.1 kW (1.50 HP), Equipment: cabin, Wet paint spray booth in cabin with extraction and supply air filter, lighting. Hfedpfervi Riox Acbjg

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Hfedpev I Akvsfx Acbsg Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Hfjdpfsxnlgcex Acbsg

Condition: new, grinding range 2 - 20 mm sharp cornered angle min./max. 90 - 135 Grad connected load 230 V Hjdpjupxkwefx Acbjfg weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Hedpoqt Dmyefx Acbsfg Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Hfodpjd Ixadsfx Acbeg Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, We specialize in the remanufacturing of blowers, compressors, and vacuum pumps. We service equipment from manufacturers such as: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, and Tuthill. We also offer blowers and compressors for rental. We operate throughout Europe and beyond. Hodpfx Acon Tntqebofg

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Hjdpfoufgnzox Acbsfg Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: new, Year of construction: 2024, functionality: fully functional, power: 12 kW (16.32 HP), inner dimension length: 1,000 mm, inner dimension width: 1,000 mm, inner dimension height: 1,000 mm, total length: 1,395 mm, total width: 1,600 mm, total height: 2,045 mm, actuation type: electric, fuel type: electric, Equipment: CE marking, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Immediately available ⚡ Professional Support! plus VAT, plus shipping costs. ✈️ Shipping costs vary depending on delivery address. Please contact us for a personalized transport quote. ✅ Immediately available – 1 unit in stock ✅ Brand new, unused professional industrial equipment ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty Available from stock – no production lead time ➖➖➖➖➖ ⭐ Matech Powder Curing Oven with Electric Heating – MATOVENB-101010 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Immediately available ☘️ Professional curing ✅ Electrically heated powder curing oven ✅ Stock item – ready for immediate delivery ✅ No production lead times ✅ Compact design for small and medium-sized workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Automatic exhaust fan function adjustable ✅ Acoustic signal at end of curing cycle ✅ Insulated door with special locking system ✅ Solid sandwich panel construction ✅ Excellent heat retention thanks to robust insulation ✅ Timer function from 10 minutes up to 24 hours ✅ Automatic shutdown after process completion ✅ Suitable for use with mobile workpiece carts ➖➖➖➖➖ Technical specifications: ✔️ Model: MATOVENB-101010 ✔️ Internal dimensions: 1000 mm L x 1000 mm W x 1000 mm H ✔️ External dimensions: 1600 mm L x 1395 mm W x 2050 mm H ✔️ Electric heating capacity: 12 kW ✔️ Fan capacity: 1,500 m³/h ✔️ Circulation fan: 0.75 kW ✔️ Total power: approx. 14 kW ±10 % ✔️ Digital temperature control Hodpfxeghf R Ue Acbefg ✔️ Infinitely variable temperature up to 220°C ✔️ Interior: 1.2 mm galvanized steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm mineral wool + 100 mm fiberglass ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ End-of-process acoustic signal ✔️ Control panel: 1 unit ➖➖➖➖➖ Secure your stock unit now! This unit is currently available 1x from stock. Ideal for workshops, small production areas, and companies looking for a reliable, electric solution for professional powder coating at short notice. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models. Feel free to contact us for leasing, hire-purchase, or installment plan options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from service and quality advantages! ✨ Enquire now – get your business ready for professional powder coating! ☀️ 2-YEAR WARRANTY ☀️

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 20,200 h, load capacity: 5,500 kg, fuel type: gas, Equipment: clamp, gripper hydraulics, For sale is a Hyster S 5.5FT gas-powered forklift. The forklift is fully functional and in good condition. Not offered with forks as shown, but with a Mayer paper roll clamp with rotary hydraulics from 2005 (last photo). Technical specifications: Year of manufacture: 2012 Rated load: 5500 kg (5.5 tonnes) Load center: 600 mm Turning radius: approx. 2375 mm - 2534 mm Lift height: up to 5300 mm Free lift: available Transmission: DuraMatch™ 1-speed or DuraMatch™ 2-speed Travel speed (loaded/unloaded): approx. 16.7 - 17.2 km/h Dimensions: approx. 3,500 mm * 1,420 mm * 2,500 mm mm Weight: approx. 7,800 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? Hjdpewalyiefx Acbofg For further information or to contact us, visit our website