DRILL-SA WING LINE for steel profiles

Vernet-Behringer HDM 910 HBP 430/854 G

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Dcodpfx Aoig T Amsptsl Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Dcodpfswmqwyox Aptsl

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Dcedpfx Aex N Iclsptol Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: excellent (used), Year of construction: 2011, Technical data: Two-column design Cutting capacity: 700 x 520 mm Cutting diameter (round steel): max. 520 mm Cutting diameter (square steel): max. 520 x 520 mm Cutting diameter (rectangular steel): max. 520 x 520 mm Dodpfjxlcpvox Aptecl CNC control: B&R PP 45 Hydraulic bundle clamping Hydraulic lowering Infinitely variable saw band speed Mobile control panel with digital display Saw blade dimensions: 6640 x 41 x 1.3 mm Cutting speed: 15 - 90 m/min Working height: 770 mm Motor power: 5.5 kW Dimensions (L x W x H): approx. 3500 x 3000 x 2500 mm Weight: approx. 5.0 t Accessories: 4 new saw blades Condition: Almost as-new condition The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Scribing. Short Piece Removal. Hard Stamping. Dedpfx Asxmvnuoptecl Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Condition: used, Year of construction: 2013, functionality: fully functional, HD-X 918 – HBP 410/923G: complete, state-of-the-art, CNC-controlled system for efficient and rapid fabrication by drilling and sawing of almost all types of structural sections and flat bars. Dodpfow Hf T Njx Aptjcl

Year of construction: 2000, condition: good (used), maximum load weight: 5,400 kg, bar diameter (max.): 40 mm, wall thickness: 50 mm, machine/vehicle number: 26130, CNC Controlled Axis: 'X' Axis Travel 0-18,000mm; 'Y' Axis (R.Hand Horizontal Drill Head) 10-450mm; 'Z' Axis (L.Hand Horizontal Drill Head) 10-450mm; 'V' Axis Travel (Vertical Drill Head) 20-895mm; 'R' Axis Travel (Saw Mitering) + 45 Degree to -60 Degree; 'S' Axis (Sawing Stroke) 0-450mm; Maximum Position Speed: 'X' Axis 50 Metre/ Minute; 'Z' Axis 10 Metre/Minute; 'V' Axis 10 Metre/Minute; Hydraulic Power Packs to suit both machines; Electrical Control Enclosure for Power Electric Equipment, Central Gears for Drive Units & Electronic Equipment; Drill & Saw Line regularly serviced; Drawings of electrical circuits, controls and Manuals available; Service & repair reports all available on request. Weight of Drill Approx 6,000kg; Dedpsqcu Euofx Aptocl Weight of Saw Approx 3,700kg; Bandsaw Blade size: 7400mm x 41mm wide; Weight of Electrical Cabinet Approx 700kg; Weight of Pincher with Carriage Guide Approx 800kg; The client may offer help to dismantle and remove the equipment. The footprint of the complete line is around 40 metres including the conveyor feed belt.

Year of construction: 1990, condition: good (used), REFORM RB32-10 radial arm drilling machine drilling capacity 32 mm MK 4 holder throat 1000 mm quill stroke 280 mm drive power 3 kw spindle speed 22 - 2000 rpm Weight 2 to Dedpem Sg R Dofx Aptscl

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. MasterCut Compact 3001.15P/Me Approx. 3,000 x 1,500 mm Sturdy construction Up to 100 mm material thickness High-quality linear guides and backlash-free drive on both sides Digital, maintenance-free AC servos with IRC Up to 40,000 mm/min IRC 2500 (incremental encoder) • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit Dcedpfx Ajycvq Ajptel • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Condition: good (used), machine/vehicle number: 550C08, A used PEDDINGHAUS punching machine with a large stroke and a large support table with stops. Dedped Hxrtsfx Aptocl Punching force: 45 tons. Stroke rate: 40 strokes/min. Stroke: 762 mm. Working height: 1110 mm.