Lead/traction spindle lathe

VOEST-ALPINE DA 210

Condition: used, Year of construction: 1992, Voest-Alpine DA210/2 - Universal Lathe Distance between centers: 2000 mm Swing diameter: 420 mm Spindle bore: 52 mm - 3-axis digital readout - 4-jaw chuck Ø 250 mm Nkjdpfx Asyc Sqrsa Dot - Multifix quick-change tool post - Coolant system - Work area lighting - Chip guard rear wall - Year of manufacture: 1992 Optional accessories: - Fixed steady rest (€650 excluding VAT) Technical Data - Center height over flat guideway: 210 mm - Center height from floor: 1090 mm - Bed width: 330 mm Main spindle: - Spindle nose according to DIN 55027: Size 6 - Spindle bore diameter: 52 mm - Front bearing diameter: 83 mm - Internal taper: Metric 57 - Number of speed steps: 12 - Speed range: 33 - 1500 rpm - Max. torque: 900 Nm Tailstock: - Tailstock quill diameter: 65 mm - Morse taper: MT 4 Slide: - Leadscrew pitch: 6 mm - Tool shank cross section (HxW): 20 x 20 mm Working areas: - Swing over bed: 435 mm - Turning diameter over cross slide: 245 mm - Cross slide travel: 330 mm - Top slide travel: 130 mm - Tailstock quill travel: 120 mm Permissible workpiece weight: - Between centers: 500 daN - Unsupported in chuck: 150 daN Feeds: - Longitudinal feeds: 0.072 - 4.038 mm/rev - Cross feeds: 0.036 - 2.019 mm/rev - Metric threads: 0.05 - 28 mm - Inch threads: 56 - 1 TPI - Module threads: Mod 0.25 - 14 - D.P. threads: 112 - 2 TPI Electric drive: - Motor power: 5.5 kW - Rated motor speed: 1500 rpm Dimensions: - Machine dimensions (WxHxD): 3250 x 1700 x 1100 mm - Weight: approx. 1500 kg

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Nkedpfx Aaoma Snxe Det

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Center distance: 1000 mm Swing over bed: 420 mm Center height over bed: 210 mm Swing over cross slide: 220 mm Center height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 Size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Power supply: 380 Volts, 50 Hz Nkjdjyah Rvjpfx Aa Det - Spindle speed selectable across 12 geared steps - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of jaws) - Multifix size B quick-change toolholder, with 3 tool cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Dimensions (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg Very good condition

Condition: new, 30000 kg length 6000 mm width 2500 mm height 823 mm lenkbar lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm Nkedpfx Asfrzvzsa Djt - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Year of construction: 2012, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2012 price: 9.400€ Nedpfx Ajgpwgaja Dokt contact : Mr. Rainer Eckerle

Condition: good (used), functionality: unexamined, turning diameter over cross slide: 178 mm, spindle bore: 35 mm, turning diameter: 280 mm, center height: 145 mm, turning length: 750 mm, total length: 1,700 mm, total width: 800 mm, total height: 1,800 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 70 rpm, overall weight: 800 kg, - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 11 A Nkedpfxjv Iqr Ue Aa Dst - Spindle nose: D 1-3 - Morse taper in head sleeve: 3 - Lead screw diameter: 25 mm - Thread: 6 mm pitch

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Nsdpfx Aaowxfaas Dskt

Condition: used, machine/vehicle number: 9232, Rotor blades: 11 x 3 Nsdpfekyzanox Aa Djkt Stator blades: 2 Rotor diameter: 350 mm Inlet: 500 x 650 mm Drive: 7.5 kW

Condition: used, Year of construction: 2023, Side mulcher light MBL 200LW PTO Walterscheid. / Nkodpfxsthglys Aa Det

Condition: excellent (used), Manufacturer G.D.W. Type FD250 Control Conventional Working area Center height 125 mm Turning diameter over bed 260 mm Turning diameter over cross slide 156 mm Turning spindle Spindle bore 38 mm Spindle speed 60 - 3000 U/min ( stepless ) Travels Longitudinal travel 80 mm Cross travel 80 mm Cross slide movable manually on the machine bed. Dimensions and weight Dimensions 1.300 mm x 700 mm x 1.400 mm Weight ca. 510 kg Options/accessories: - collet type chuck - collets - 3-jaw chuck with jaws - tool holders Nkodpfx Aasw Aw H Ho Det - digital readout system Heidenhain for 2-axis Under power in our warehouse.