Tool and Cutter Grinder

Walter UWS20

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Face grinding machine Year of manufacture: 1985 30 kW grinding motor Dkedpsd E Np Ejfx Aidow Modicon control system Magnetic control, 6 stages Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Year of construction: 1988, condition: ready for operation (used), Travel X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10000rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11000kg. Dkedpfotpp H Nsx Aidsw

Year of construction: 1981, condition: used, Manufacturer: Deckel Type: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal movement (X-axis): 700 mm Transverse movement (Y-axis): 400 mm Vertical movement (Z-axis): 450 mm Spindle overhang: 50 - 450 mm Spindle mount: ISO 40 Dedpfeihp U Dsx Aidjkw Number of spindle speeds: 18 Spindle speed range: 31.5 - 1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5 - 1600 rpm Machine weight: 2000 kg Feeds (X, Y, Z axes): 18, 10 - 500 mm/min Accessories: Milling head with quill Table: 1000 x 470 mm

Condition: excellent (used), 1 lot SK 50 shots (28556) approx. 65 pieces approx.250 kg without pallet Dkodpfjuir Unex Aidew

Condition: excellent (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 10002045, Weinig Rondamat from 2020, in very good condition. Dkjdpfxozi D Iuj Aidjw

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Dodpfxswuqbbo Aidskw Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: refurbished (used), SURFACE GRINDER Dkjdodwn Tpspfx Aidow 3000x300mm ALPA RVA 3000 Power: 15kw

Condition: used, Year of construction: 1995, turning diameter 150 mm Dkjdpfx Asyi Hwtsidow turning length 1250 mm control OSP 7000 L total power requirement 37 kW weight of the machine ca. 8500 t

Condition: as good as new (ex-display), Year of construction: 2024, Compact, precision CNC rotary table suitable for single-piece or small-batch production in precision engineering. A horizontal or vertical configuration is possible. You can't buy better quality! - Made in Germany - It can be used as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, milling slots, or on tool and surface grinding machines. Square, hexagonal, and gear milling of any pitch, or 3D machining are possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is powered by a controlled 1.8-degree stepper motor with 3.2A and a holding torque of 1.2 Nm. The worm and worm gear are manufactured in-house, guaranteeing the highest precision. The pair is mounted on four ball bearings and adjusted for zero backlash, and can be readjusted. The one-piece, stable output spindle is equipped with a faceplate, d=108 mm, with an MK 1 internal taper and a through hole of 10.3 (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with a power supply is included in the package. The optimized pre-programming is done in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental repeat cycles, right and left travel, and cycle pauses, which can of course be programmed. With the software you can: Travel programs and cycles; absolute or incremental travel values. The actual value of the rotary axis can be easily queried at any time using the software. Using an output, you can receive start pulses from an NC machine. Complex scaling divisions, transverse bores or gears can be produced quickly. In addition, you can now use a start pulse to run several different travel angles one after the other. For example, incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees, with or without a pause, or rotate back. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and reference commands can now be controlled externally by your NC control system using M-functions. Optional: Locking air with splash guard. We can offer standard clamping devices for your applications. Furthermore, we have the possibility to quickly and inexpensively manufacture special clamping devices for you. Special accessories: 3-jaw chuck 80 mm: 125 Euro # 600011 3-jaw chuck 100mm bore 25 mm and an adapter plate (center height adjustment to 80 mm): 300 Euro # 600021 Tailstock: height adjustable 60 - 80 mm: 150 Euro # 600030 Clamping device for ER 25 collet with nut: 125 Euro # 600031 USB data cable for programming via PC: 150 Euro # 600032 Programming of your travel angles: 40 Euro # 600033 Test travel program and test report of the final inspection: 100 Euro # 600036 Collet set ER 25 up to D16 mm 10 pcs.: 125 Euro Djdpfx Aisd Erdrsdekw # 600037 Clamping device for ER 32 collet with nut up to D20: 125 Euro # 600097 Control cable with magnetic switch - read contact for automation without NC machine output: 25 Euro # 600099 Acceptance / Programming / Aluminum case / Software provision: 80 Euro

Condition: used, Year of construction: 2020, total height: 2,600 mm, total width: 1,250 mm, total length: 1,610 mm, rotational speed (min.): 1,200 rpm, power: 4 kW (5.44 HP), SPYRA Chip Centrifuge 500H - For de-oiling wet chips containing oil or coolant emulsion - Fully operational and ready for use - Warranty available upon request! - Contaminants and tramp parts within the chips are not an issue for this machine, as it has been specifically designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 2 t/hr - Aluminum: 0.5 t/hr - Brass: 2.2 t/hr Dksdew Nq Amjpfx Aidew - Grey cast iron: 2.2 t/hr The machine can be inspected in 71384 Weinstadt near Stuttgart.