HIGH SPEED VERTICAL BORER

Webster & Bennett EV 36”

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Dsdpswrxqxjfx Addscr Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm Dcsdpfx Aort Unwsddor - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible. Dodpfx Asv I U Iyeddscr

Condition: excellent (used), Year of construction: 2008, X/Y/Z travel: 900 x 400 x 200 mm Table size: 800 x 400 mm Dcedpfx Ajv Irwrjddjr

Condition: good (used), Cast iron bed - Floor Plate Dsdpsh Auahsfx Addscr Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Dcsdjwxw S Ijpfx Addor Immediately available! Can be tested under power.

Condition: excellent (used), grinding length: 3,500 mm, center width: 5,000 mm, Cylindrical grinding machine. Schehr Meuselwitz, model SAXW 1000. Weight: 33 tons. Centre distance: 5,000 mm. Grinding length: 4,000 mm. Concave and convex grinding direction. Total length: 9.6 meters, width: 3 meters, height: 2.4 meters. 380 Volt. The machine can be inspected under power at the seller's facility. Dcjdpfx Aswb Dq Noddor

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min Dcsdpfxewbvhao Addsr weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: used, Year of construction: 2006, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, table width: 1,250 mm, table length: 750 mm, rotary table diameter: 700 mm, DMG DECKEL MAHO DMU80 monoBLOCK HEIDENHAIN iTNC530 Rotary T: dia700mm T:1,250x750mm 18,000rpm HSK-A63 ATC32 Touch probe TS640 Blum Laser Chip Conveyor Dsdevxngdspfx Addjcr

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes Dcsdpsvwgm Hofx Addjr high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.