Eccentric Press - Single Column

WEINGARTEN AVP 63

Condition: excellent (used), Year of construction: 2006, Sheetlength: 3100 mm Cutting capacity: 6 mm Backgauge reach: 750 mm Featured with: - 3 Sheetsupports frontside - Access protection backside - Footpedal Fjdpfxon Smtqe Addjgk Motor power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min tail stock MK6 quill stroke 225 mm diameter of quill 105 mm spindle bore 132 mm feed längs 0,039 - 18 mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg dimensions of the machine ca. 4900 x 1650 x 1650 mm - Coolant device - Machine light Fodpfeqv Iw Tjx Addjgk - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Centre distance 1000 mm Feded Sitkopfx Addogk turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Fsdpfsh Ha Ipex Addjgk Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m Fgedpfx Ajfrvzvjddok injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Fgjdjd I A Dhepfx Addek Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Fsdpfx Adod R Er Dsdsgk Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. Fgsdpfx Adsqhkukodok The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. The machine is still in production. Viewing possible by arrangement.

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm - display speed on touch panel - illumination drilling unit Fodjlgvkispfx Addsgk - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E Fedpsg Ufvbjfx Addsgk