Demolition hammer

Wimmer WH17A

Year of construction: 2023, condition: new, Continuous power: 20.12 kVA / 16.10 kW Voltage: 230 V / 400 V Frequency: 50 Hz Crodpfx Aiemw Ui Rs Sjh Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 liters Generator type: IP21 protection class, MeccALte Starting mode: electric Generator with AVR control Dimensions and weight: Length (mm):1645 Width (mm):870 Height (mm):1072 Weight, dry: 640 kg

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V Cedpfjrtrvysx Ai Sorh -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Crodpfoxfrv Eox Ai Ssh Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2026, functionality: fully functional, Grinding Wheel Dressing Machine: Easy to Operate, Robust, and Precise Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of easy operation and exceptional stability. The solid granite bed ensures the highest precision and durability, while the user-friendly operation maximizes efficiency in your workshop. While you continue production on your tool grinding machine, our dressing machine saves you time and, therefore, money. Ideal for those who value reliable performance and top value for money! Cjdpjubbrtjfx Ai Ssrh

Year of construction: 2022, operating hours: 0 h, condition: new, Carrier weight: 20-33 tons Crjdpfx Ajiwxnvei Ssh Operating weight: 1800 kg Oil flow rate: 130-180 l/min Oil pressure: 150-170 bar Chisel diameter: 140 mm Impact frequency, Auto Start / Auto Stop mode: 400-800 bpm Sound power level: 120 db(A)

Condition: new, Year of construction: 2026, Machine Description 1. Worktable Sectioned vacuum worktable with FOUR independent vacuum zones, manufactured from rigid and durable HPL panels. Each zone features vacuum ports connected via a piping system to the vacuum pump. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. T-slots are also provided for manual workpiece clamping when required. 2. HQD Spindle High-quality 9 kW brushless HQD spindle, powered by an inverter with built-in overload protection. High-speed electro-spindle equipped with an innovative air-cooling system. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System High-performance, energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring excellent machining quality at high feed rates. Brushless servo motors driving the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. X and Y axis movement is transmitted through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for long-term reliability. All axes are equipped with professional HIWIN linear guide rails, which undergo strict quality inspections and testing throughout the manufacturing and assembly process. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining operations, resulting in improved surface finish and machining accuracy. 5. 8-Position Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC), supplied with ISO30 tool holders and ER32 collets. Included collets: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. Crodpfx Aievupcrj Sjh 6. Vacuum Pump (Optional) & Dust Extraction Hood Four independent vacuum zones for efficient workpiece holding. Pneumatically operated dust extraction hood mounted around the spindle, allowing connection to virtually any dust extraction system while maintaining a clean working environment, improving operator safety, and preserving machining accuracy. Technical Specifications Parameter Value Working Area 2100 × 3200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump 2 × 7.5 kW (optional) Software UCanCAM V13 (Polish language version, optional) Machine Dimensions 4070 × 2870 × 1900 mm Machine Weight 2050 kg

Condition: good (used), Friedrich Deckel FP 2 LB Toolroom Milling Machine The accessories are not included in the scope of delivery but can be purchased separately. The Deckel FP 2 LB universal milling machine is characterized by its extremely stable base frame and is designed as a traveling column machine. This means that the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for the direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as those found in American V8 engines. The long travel of 800 mm is also advantageous in this application. Technical Specifications: Deckel Universal Milling Machine FP 2 LB Digital Display: 3-Axis Digital Display Heidenhain X-Axis Travel: 800 mm Y-Axis Travel: 300 mm Z-Axis Travel: 400 mm Tool Holder: SK 40, Drawbar Thread S 20 x 2 Milling Head Type: Vertical Milling Head Speed Range: 40 - 2000 rpm Number of Steps: 18 Crjdjgyw S Tspfx Ai Soh Table Type: Universal Swivel/Tilt Table (± 45° / ± 15°) Table Clamping Area: 1000 x 520 mm T-Slot Size: 16 mm Vise 160 mm Power Consumption: 9.5 kVA Weight: Approx. 1900 kg Dimensions: Approx. 1570 x 1675 x 1850 Financing through our bank is also possible. komplett-konzept.leasingo.de Other Items - New and Used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2012, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 2.172 kg Functional Generator capacity: 60 kVA CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fuel consumption: Diesel Delivery terms: EXW Water tank volume: 390 l Additional information Codpfsx H Nlisx Ai Sorh Please contact Christian Theißen for more information Manufacturer: SDMO Model: R66C2 Year of build: 2012 Condition: Used Data: Performance: 60 kVA Engine: John Deere Length: 234 cm Width: 108 cm Height: 190 cm Tank capacity: 39 l / Diesel Required connection: 2x 230 V/16 A, 1x 380 V/16 A, 1x 380 V, 63 Ao. Klemmleiste. Drive type: Diesel Operating noise: 88 dB Own weight: 2.172 kg Weight: betankt 2.500 kg Own weight: 2.172 kg Special features: Lifting eye, consumption of approximately 14.75 liters per hour. On Weijer trailer. Location: 41468 Neuss immediately available

Condition: new, Unused bin washer. Bought for a contract which never materialised. Crodpfjtpv T Nox Ai Seh

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, Crjdpfxeu R S Nwe Ai Ssh corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use