Blade Grinding Machine

WINTER GRINDER 4000 AUTO MAGNETIC LIN

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2450x820x1380 mm Weight 1500 kg Total power requirement 2,5 kw Ibjdpfxovz Hbfe Aiyob

Condition: good (used), functionality: fully functional, Maximum size: 360 x 310 mm Minimum: 140 x 100 mm Book block thickness: max. 60 mm, min. 3 mm Cover size: max. 642 mm, min. 203 mm Speed: up to 18,000 cycles/hour Collating machine: • 18 stations • 18 Feeder 3681 • 3714 Reject module Controls: • Misfeed and double sheet detection • 2 jogging elements Perfect binder: • Command unit • 35 clamps • Clamp spacing: 18" • Infeed channel with vibrator • Jogging station • Nipping station • Milling and roughening station • Double combined spine processing station • Unit for spine gluing with hotmelt • Spine gluing unit • Hotmelt side gluing unit • Gluing system • 2 pre-melters • SF-Stream cover feeder Ibodsu Eubxjpfx Aiyjb • Cover scoring: 2 to 6 lines • Delivery unit Standard accessories: • 1 set of operating manuals • Condition: Clean, in very good, fully functional condition • Availability: Immediately

Condition: good (used), Year of construction: 2009, Megamat FSE Lift Type: FSE 7.1 2448/612-4260 Serial no.: 500002883 Year of manufacture: 2009 Unit height: approx. 4260 mm Ibsdpfxoyxyxqe Aiyeb Unit width: approx. 2850 mm Unit depth: approx. 2400 mm Number of trays: 33 Tray width: approx. 2670 mm Tray depth: approx. 816 mm Maximum tray load: 400 kg Total load capacity: 70,000 kg Colour: beige

Condition: new, Year of construction: 2024, functionality: fully functional, Technical description with the following key data: Load capacity: 1000 kg static line load Useful stroke: 810 mm Overall height: 200 mm Total height: 1010 mm Platform length: 1300 mm Platform width: 800 mm Material: Smooth sheet metal Lifting time approx.: 16 sec. for the full useful stroke Lowering time: load-dependent Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 4 meters of cable Motor: 0.75 kW Ibsdpfjgqu A Tox Aiyob Paint finish: Blue-grey RAL 7031 Unit placement: integrated in the lifting table Control box: Dead man's control incl. 2 m cable Total weight: approx. 160 kg Standard version: The lifting tables comply with EN 1570 E and are marked with the CE symbol. The steel parts are cleaned, primed with anti-rust paint, and coated with two-component polyurethane paint. The lifting tables are equipped as standard with all-round safety cut-off strips made of aluminum and with mounting supports for repair and service. Our lifting tables are designed for approx. 5 lifting cycles/hour with full load in 8 hours/day. For more intensive operation, we offer special lifting tables. Warranty: 1 year on parts under normal operation in one shift, excluding labor costs.

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Iodpfey Sf Ukox Aiysbb Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: good (used), Year of construction: 2004, Megamat Type: FSE 3.5 2448/816-3785 Machine no.: 35.0352 Year of manufacture: 2004 Machine height: approx. 3,785 mm Machine width: approx. 2,640 mm Machine depth: approx. 2,710 mm Number of trays: 20 Tray width: approx. 2,240 mm Tray depth: approx. 820 mm Tray height: approx. 55 mm Ibedpfoytf U Ejx Aiyjb Tray load capacity: 307 kg Total load capacity: 70,000 kg Colour: white

Condition: new, Year of construction: 2020, table load: 60,000 kg, load capacity: 60,000 kg, DEMMELER DRALT 2500 tilting rotary table. New, newer used stored in heated warehouse. 2,500 x 2,500 mm, 60 ton. Linear travel 2,500 mm. Tilting 10°. Continues rotating. Isdpfx Aowdiwaoiyjbb Linear measuring system Heidenhein LC 185.

Condition: excellent (used), Year of construction: 2005, operating hours: 66 h, functionality: fully functional, machine/vehicle number: MMFE 965122, Perfect binding line Acoro A5, 28-station gathering machine type 1571, tensioning element + handfeeding unit, 2x vacuum pumps, in-house blow air, reject gate type 1572 NN19204 FE 965122 for incomplete products, spiral raceway type 3641 MMFFE 965122/025, transfer unit to perfect binder type 3635 MMFE 965122 prepared for book block feeder, 20-clamp Acoro A5, main milling station, pre-stations with roughening and notching, hotmelt spine and side glue, spine glue premelter c80, side glue premelter, PUR spine glue, PUR premelter, gauzing station, pile cover feeder, scoring station, double nipping station, laydown onto conveyor system. Solema drying tower one up and one down, total drying conveyor length approx. 40 m. Reject gate, Merit-S three-knife trimmer right-hand infeed machine number 358465/361275, Uno compensating book stacker machine number 15340411 NNN 33114. Isdpsx Rym Ejfx Aiysbb

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Horizontal boring machine TOS WHN 13.8 CNC Control system: Heidenhain 530 Spindle diameter: 130 mm Working table: 1800 x 2500 mm Iedpfxezx Ad Hs Aiyobb Working spindle taper: ISO 50 Spindle speed: 10-3000 rpm Working spindle extension: W-800 mm Vertical spindle adjustment: Y-2500 mm Transverse table adjustment: X-4000 mm Longitudinal stand adjustment: Z-1600 mm Feed range X, Y, Z, W: 4-3000 mm/min Table load: 20 t Power consumption: 82 kW

Year of construction: 2023, operating hours: 4,371 h, condition: ready for operation (used), travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, spindle motor power: 11,500 W, spindle speed (max.): 10,500 rpm, number of axes: 5, This 5-axis WALTER HELITRONIC RAPTOR DIAMOND was manufactured in 2023. It features a tool diameter capacity of Ø3-290 mm, with an optional extension up to Ø400 mm, and a maximum tool length of 270 mm. The machine is designed for the production and regrinding of carbide, HSS, PCD, and CBN tools. If you are looking to get high-quality grinding capabilities, consider the WALTER HELITRONIC RAPTOR DIAMOND cylindrical grinding machine we have for sale. Contact us for further details. • Operating hours: approx. 4,371 h • Working range: • Tool diameter: Ø3–290 mm (optional up to Ø400 mm, depending on configuration) • Maximum tool length: 270 mm (optional up to 350 mm, depending on configuration) • Maximum tool weight: 50 kg • Axes: • Number of CNC axes: 5 • Linear axis speed: up to 15 m/min Ijdszxg Tfopfx Aiyjbb • Spindle: • Max grinding wheel diameter: Ø200 mm • Interface: HSK • Belt-driven, double-ended spindle • Grinding / Eroding: • Grinding and EDM in one setup • For carbide, HSS, PCD, CBN tools • Configurable for up to 3 electrodes and 3 grinding wheels, or alternatively up to 6 grinding wheels • Control / Machine design: • WALTER / UNITED GRINDING CNC control • Enclosed working area with automatic protective door Additional equipment • Automatic loading/manipulator system for shank tools (automatic tool loader/manipulator) • Process cooling system • Coolant/dielectric filtration and circulation system • Coolant/dielectric system • Tool holders • Flanges/adapters • Grinding wheel/electrode accessories