Injection molding machine

Wittmann Battenfeld MacroPower 900/ 8800

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 138337-100, clamping force: 9,000 kN, screw diameter: 105 mm, injection pressure: 1,931 bar, ejector stroke: 300 mm, opening stroke: 2,100 mm, TECHNICAL DETAILS Screw diameter: 105 mm Screw stroke: 525 mm Screw L/D ratio: 22 Theoretical shot volume: 4,545 cm³ Injection pressure: 1,931 bar Maximum screw speed: 167 rpm Maximum plasticizing rate: 151 g/s Screw torque: 8,000 Nm Nozzle travel / nozzle thrust force: 950 mm / 129 kN Injection volume flow rate: 725 cm³/s Injection volume flow rate with double pump (option): 906 cm³/s Air injection volume flow rate with tank (option): 1,812 cm³/s Cylinder heating capacity: 53.9 kW Number of heating zones: 7 Clamping force: 9,000 kN Maximum opening stroke: 2,100 mm Min./Max. tool height: 500 – 1,000 mm Platen size: 1,720 x 1,550 mm Tie bar spacing: 1,200 x 1,000 mm Ejector stroke: 300 mm Ejector force: 165 kN Tool opening force: 300 kN MACHINE DETAILS Pump output: 90 kW Heating capacity: 53.9 kW Bwsdpsy T Hprefx Ahkjp Oil tank volume: 1,100 l Dimensions & Weight Machine dimensions (L x W x H): 10,100 x 3,400 x 2,700 mm Weight: 35,200 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Hermle C 250 V, Year of manufacture: 2025, Control system: Heidenhain 7, Travel range X/Y/Z: 600/550/450 mm, Tool changer: 30-position, Tool holder: HSK 63, Bedpfx Ahsy Uwhuekewp Spindle speed: up to 16,000 rpm, Fixed table, Table size: 800 x 616 mm, High-pressure coolant system: 40 bar, Paper band filter system, 3D measuring probe: Blum TC, Blum LG 53 WZ for measuring / breakage detection, Chip conveyor, Enclosure roof: manual.

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Bwsdjw Ebpwopfx Ahkop Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. Bwjdjt Hwucjpfx Ahkep * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: excellent (used), Year of construction: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of production: 2008 A gravimetric dosing and mixing unit designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. The actual, measured and weighed quantities are constantly compared with the set values using a modern microprocessor-based control system, which guarantees very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: 2 feed tanks for primary material or regranulate/primary material 2 feed tanks for masterbatches or additives Bwsdpfxewm Ii Ts Ahkep 2 pneumatically controlled conical dosing heads 2 precision dosing screws with motor drive Material tanks – capacity approx. 7 litres Weighing tank – capacity approx. 0.8 litres Mixing tank – capacity approx. 3.0 litres Manually operated gate valve GRAVInet controller with colour touch panel for recipe, milled material and process data management, vibration compensation and continuous self-optimisation; built-in Ethernet port and standard reporting/printing functions Technical data: Average capacity: 60 kg/h Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Compressed air: 6–8 bar, without oil and water Weight: approx. 60 kg ✅ The set includes Piovan material feeders - visible in the photos.

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Bedpfx Aog Emvhehkswp Unilog 4000 Closing force 60 tons Year of manufacture 1997 Screw diameter 30 mm Shot weight approximately 90 g

Condition: like new (used), Year of construction: 2024, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, B axis table tilt +30°, -110°, Bsdpfx Ahsyia T Sekswp C axis 360degrees, 18.5kW, 12000rpm, BT40, 24 pallets 120 station tool changer, Fanuc I series control, swarf conveyor,

Condition: like new (used), Year of construction: 2008, YEAR : 2008 Year MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok TABLE DIMENSIONS : mm. 5000 x 2380 Table size PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Blankholder STROKE OF THE BLANKHOLDER SLIDE : mm. 200 Cushion stroke ram RAPID SPEED : mm/sec 220 Bwedpfx Ahsvm Eixokop Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600 Cushion capacity STROKE OF THE BLANKHOLDER SLIDE : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Distance btw uprights TOTAL WEIGHT: KG. n.d

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Bodpfx Aeu Eki Sehkswp Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Bwedpsw Rqwtsfx Ahkop