TP-PLUS-1:90+TP-Direct:120TP-Direct:120

Wittmann

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Number of axis: 3 Pjdpfoyftw Esx Aa Djgg Reach: 1500 mm Payload: 6 kg X=420mm Y=1200mm Z=1500mm EUROMAP 67

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm daylight 650 mm Pjdpfx Aet Hw S Iea Dogg Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software

Condition: used, Year of construction: 2017, Serial no. 141342-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum daylight 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, screw L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection unit/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2020, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 15,564 This item is part of an online auction. Sale is subject to approval by the client. Pgjdpfsyc Symex Aa Djg

Condition: used, Year of construction: 2017, Ser.-No. 140228-100, Control system type Unilog B8, clamping force 1,800 kN, tie bar clearance 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, platen gap max. 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, min. mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 2 hydraulic core pulls, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2017, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 17,844 This item is part of an online auction. The sale is subject to the approval of the seller. Pjdpfx Aajyc Stas Djgg

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: Podpfx Aju Awalja Djgg - Robot interface - 4 x hydraulic core pulls

Condition: used, Year of construction: 2017, Ser.-No. 138524-100, Control unit: Type Unilog B8, Clamping force: 1,100 kN, Tie bar clearance: 470 x 420 mm, Mould installation height: 200 - 450 mm, Opening stroke: 380 mm, Maximum platen distance: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Maximum mould weight: 1,000 kg, Minimum mould dimension: 296 x 296 mm. Injection unit: Type 350, Screw diameter: 25 mm, Screw stroke: 175 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 85.9 - 220 cm³, Specific injection pressure: 1,595 - 3,000 bar, Maximum screw speed: 350 rpm, Screw torque: 340 - 500 Nm, Nozzle stroke/nozzle force: 250 mm/40 kN. Dosing unit: Manufacturer Movacolor. Injection/dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, Year 2017. Sprue picker/robot: Manufacturer Wittmann, Type WP80, Year 2018, Travel axes X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel: Manufacturer Metabo, Type SA250, L 25 m. Machine weight: 4,800 kg, Operating hours: 42,853. This item is part of an online auction Pgjdpfjyc Sqxjx Aa Dog Sale is subject to the approval of the client.

Condition: used, Year of construction: 2017, Serial no. 138522-100, control system type Unilog B8, clamping force 1,100 kN, tie bar clearance 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, minimum mould size 296 x 296 mm, injection unit type 750, screw diameter 35 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 5,200 kg, operating hours 36,180. This item is part of an online auction. Pjdpfx Aaoyc Snks Dogg Final acceptance subject to the approval of the seller.

Condition: used, Year of construction: 1993, pressure 160 t throat 400 mm stroke 20 - 160 mm table surface area 1200 x 800 mm ram adjustment 100 mm no. of strokes 60 Hub/min ram surface 860 x 520 mm Podpfx Aajtqm Dfs Dogg total power requirement 15 kW weight of the machine ca. 16 t dimensions of the machine ca. 1,7 x 2,5 x 3,23 m - Additional clamping plate - cross-grooved - Foot switch - Hydraulic clutch - Hydraulic ball screw clamp - Hydraulic overload protection - Flywheel brake - Hydraulic system with oil cooler

Condition: used, Year of construction: 2017, Serial No. 138264-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038. Pgjdpfjyc Sh Dex Aa Dsg This item is part of an online auction. The sale is subject to the approval of the seller.

Condition: excellent (used), Manufacturer: WITTMANN Model: W818-8339 Year of manufacture: 2016 Pgedpfx Aaex Eiufe Dog Type of equipment: Removal system / manipulator Movement range (X / Y / Z): X: 420 mm Y: 1,200 mm Z: 1,500 mm Equipment: Safety devices

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Pgedpfxev Rmmms Aa Djg

Condition: excellent (used), Year of construction: 2017, Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of manufacture: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Injection pressure: 2083 bar Dosing volume: 169 cc Clamping unit: Clamping force: 110 t Bar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Pgsdpfx Aeyctdysa Deg Clamping unit: toggle lever Control: UNILOG B8 - touchscreen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with Air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements The machine was serviced in Germany Robot Wittmann W818 Year of manufacture: 2015 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic Travel paths in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and the conveyor belt for an additional charge Dimensions: Weight: 4800 kg Length/width/height: 4.91x1.42x2.10 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Year of construction: 2019, operating hours: 21,800 h, condition: ready for operation (used), controller manufacturer: BATTENFELD, controller model: UNILOG B8, screw diameter: 35 mm, This WITTMANN Battenfeld EcoPower 110/350 was manufactured in 2019. A robust electrical injection moulding machine featuring a screw diameter of Ø35 mm and an injection volume of 168 cm³. With tie bar spacing of 470 x 420 mm, it's currently producing with polystyrene. Total working hours are approximately 21800, maintaining a very good technical condition. Contact us for more information about this machine. • Injection volume: 168 cm³ • Tie bar spacing: 470 x 420 mm • Number of cores: 1 core • GK: x4 • Total working hours: approx. 21,800 h • Machine currently in production: Yes • Material: Polystyrene (PS) • Technical condition: Very good Pedoyca Skepfx Aa Djgg

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Pedow H Auqspfx Aa Dsgg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 400 mm, total length: 3,100 mm, total width: 550 mm, total height: 900 mm, overall weight: 80 kg, power: 0.18 kW (0.24 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 3 A, Equipment: type plate available, Aluminum frame conveyor belt 310x40cm 8m/min speed sorting belt conveyor mobile aluminum frame horizontal conveyor belt for sale in excellent condition length: 3100mm belt width: 400mm full width: 480mm speed: 8meters/min drive: geared motor 0.18kw 50Hz belt material rubber fabric green color. frame material aluminum profile. height: 820mm adjustable/tilting legs Pgsdpfx Aaeydp Tge Dsg braked wheels.