Used Nef Lather for sale (216)

Condition: good (used), Swing diameter over the carriage 225 mm Center height over the bed 260 mm Carriage length 520 mm Carriage width 215 mm Spindle bore 72 mm Chuck diameter 175 mm Spindle diameter in the front bearing 100 mm Drive power 22 kW Spindle speed 20-4000 rpm Rcedpfjzwpkkjx Abpef Tailstock diameter 80 mm Tailstock travel 100 mm Tailstock arbor MK4 Distance between centers 600 mm Bed width 320 mm

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed: 560 mm Swing diameter over cross slide: 250 mm Rsdpovn Rlzefx Abpjcf Spindle bore: 65.3 mm Max. power: 15 kW Speeds: 11.2 - 2,240 rpm Distance between centers: 1,000 mm Quill diameter: 80 mm Quill taper: MT 5 Including chip conveyor Including complete documentation Immediately available from stock

Condition: used, mileage: 1,91,000 km, power: 140 kW (190.35 HP), first registration: 06/2020, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 06/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,140 mm, total width: 1,928 mm, total height: 2,020 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, 1st owner – German fire department vehicle. Only 191,000 kilometers driven, used in regular service until recently. Base vehicle: VITO MIXTO 119 CDI 4matic 4x4. Long wheelbase: 3200 mm. Sliding doors on both sides with power assist and soft-close function. WAS conversion into an emergency ambulance / emergency medical response vehicle (NEF) with a refrigerator, drawers, and various cabinets. 3 seats registered and available as the current operational vehicle / quick-release system for the seat rail system. Regular inspections performed by WAS. Diesel engine with 140 kW / 2143 ccm and Euro 6. 7-speed GTronic automatic transmission. Automatic climate control. Auxiliary heater. Attention Assist fatigue detection system. ABS+ASR, ESP, lane keeping assist / crosswind assist, hill start assist, cruise control, multi-function steering wheel, MB emergency call system, etc. Central locking with remote keys (4 original keys included). Unladen weight according to vehicle documents: 2705 kg. Permissible total weight: 3200 kg. Overall length 5.14 m / width 1.93 m / height 2.02 m. Special signaling system: HÄNSCH DBS5000 / front strobe light StandbyL54 / HÄNSCH 620 with Martin horn. Retro-reflective rear warning markings from design112. Speed limiter: 160 km/h. The Vito currently has winter tires fitted. It has 8 tires in total, the second set of tires on rims is included, as shown in the pictures. The tire size is 225/55R17C. The vehicle is ready to drive and in good condition. The Vito runs very smoothly and without any malfunctions. The last service was performed at Mercedes-Benz at 178,000 kilometers. No error messages. The TÜV (technical inspection) expired in 06/2026 and, despite being otherwise in good condition (inspection report available), the vehicle did not pass the inspection... because the measured particulate count was too high during the exhaust emission test, which is considered a "significant defect" for Euro 6 vehicles... However, the Vito had been stationary for a few days before the measurement and was apparently not warm enough. After consultation and possibly with a new DPF, the vehicle can also be sold with a new main inspection. Rodpfjyxunyox Abpocf Various documents for the special equipment installed in the vehicle, the WAS inspection booklet, the COC certificate from Mercedes, and the individual approval from 2020 as an emergency vehicle are included as original documents. This offer is valid only for commercial businesses of any kind, as well as for all emergency services / authorities. Sales to private end-users are unfortunately not possible. Subject to prior sale and errors. Purchase price subject to differential tax according to §25a UStG, i.e. gross = net. No additional 19% VAT needs to be paid. At the same time, the VAT cannot be deducted. We will take your old emergency vehicle in part exchange after consultation. Please contact us.

Condition: used, Year of construction: 2002, Lathe Gildemeister Gildemeister NEF 320K, year of manufacture 2002. Rcodpfx Abezu Aqlopsf

Condition: good (used), Year of construction: 2001, turning diameter 320 mm turning length 750 mm control Heidenhain Manual Plus Number of working hours 18632 h longitudinal slide -travel 8/5000 mm face slide travel 8/5000 mm/min rapid travel - longitudinal/face 8-10 m/min power feed longitudinal 6000 N power feed coss 3000 N weight of the machine ca. 2 t dimensions of the machine ca. 2,6x1,44x1,44 m Working Area: - Center height — 160 mm - Center distance — 750 mm - Max. swivel diameter over bed — 320 mm Rcsdozp Rw Aspfx Abpsf - Max. swivel diameter over cross slide — 150 mm Work Spindle: - Spindle head DIN — 55027 - Size — 6 - Internal taper — MK6 - Spindle diameter at front bearing — 85 mm - Spindle bore — 52 mm - Max. chuck diameter — 200 mm - Max. torque — 420 Nm Support: - Tooling system — Multifix - Tool cross-section — Size B - Number of bed slides — 1 - Number of cross slides — 2 - Longitudinal stroke — 700 mm - Cross slide travel — 185 mm Tailstock: - Quill taper — MK5 - Quill diameter — 70 mm - Max. quill travel (manual / automatic) — 120 / 8 mm --> Footprint — 2540 mm × 1690 mm

Year of construction: 1990, condition: ready for operation (used), A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible. Rcjdpfxex R Duao Abpjf

Year of construction: 1996, condition: ready for operation (used), A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible. Rcedpfjx Uq Uhox Abpef

Year of construction: 1982, condition: ready for operation (used), A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible. Redpfxsydp Aze Abpscf

Year of construction: 2003, condition: ready for operation (used), Swing diameter over bed/cross slide: 320mm/150mm, center height: 160mm, distance between centers: 750mm, max. turning length: 740mm, travel X/Z: 185mm/700mm, chuck diameter: 200mm, speed: 4000rpm, rapid traverse X/Z: 5m/10m/min, tool stations: 8, tailstock quill stroke: 120mm, tailstock quill diameter: 60mm, machine dimensions X/Y/Z: approx. 2300mm/1500mm/1700mm, weight: approx. 2000kg, control: Heidenhain. Documentation available. An on-site inspection is possible. Rjdpfx Abezdum Djpjcf

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,779 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,250 mm, spindle motor power: 28,000 W, overall weight: 6,000 kg, controller manufacturer: SIEMENS, controller model: 840D SL, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details. • Turning length: 1200 mm • Main spindle: Integrated spindle motor • Turret: 12-station disc turret • Tool holder standard: VDI 40 • C-axis brake: Hydraulic • Tailstock: Automatic • Coolant system: Coolant equipment with chip pan • Operating software: ShopTurn • Control panel: ERGOline operating panel • CAD reader: External PC compatible • Hydraulic unit: Included for clamping device and steady rest • Hollow clamping device: Hydraulic • Max draw tube diameter: 95 mm • Coolant spray gun: Included • Chip conveyor: Right side discharge • Chip conveyor discharge height: 1250 mm • Steady rest type: Self-centering steady rest • Steady rest range: Ø 50–200 mm • Chuck type: 3-jaw power chuck • Chuck model: ROTA-NCK plus • the chuck has a diameter of 325 mm + is included • Tool spindle 1: Angled 90° live tool holder • Tool spindle 2: Straight 0° live tool holder • Tool spindle application: Drilling, milling and tapping • Tool holder shaft standard: DIN 69880-40 • Electrical cabinet cooling unit: Up to 40°C • DMG Netservice onboard: Installed OPTIONAL approximately 100 different tool holders (VDI holders) Redpfxsy Twc Ns Abpocf Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Rjdpfxjxrg S Ie Abpjcf Z-axis: 1250mm Tailstock : Tailstock travel: 1150mm

Condition: excellent (used), Swing over bed 212 mm Distance between centers 750 mm Spindle speeds 10-4'000 rpm Control: HEIDENHAIN Manual Plus Misc. accessories Rsdpeud Nb Ijfx Abpocf MARCELS MASCHINEN CH

Year of construction: 1999, condition: ready for operation (used), Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible. Rcedpozrn Idsfx Abpof

Condition: good (used), Year of construction: 2006, CNC - lathe machine Machine type: DMG Gildemeister NEF 600 Control: Heidenhain IT Turn Plus Year: 2006 SPECIFICATIONS Max. turning length: 1.250 mm Max. swing over bed: 600 mm Max. swing over slide: 410 mm Spindle bore: 90 mm Amount of controlled axes: 2 Spindle speeds: 3.000 rpm Spindle power: 36,5 / 27,5 kW Torque: 785 Nm Tailstock: MK 5 Quill: 80mm Amount of turrets: 1 Tool: VDI 40/8 Tool capacity: 8 Machine weight: 5.500 kg Req. space (LxBxH): 5,0 x 2,0 x 2,2 m m Rjdpfx Asziyz Djbpjcf Equipment Chip conveyor 3-jaw chuck: 315 mm Main Spindle: neu gelagert Innenraum neu lackiert Wartungspaket

Condition: used, Year of construction: 2003, Lathe DMG Type NEF 320 K Condition: Used Year of Manufacture: 2003 Control: SINUMERIK 810DE-L CCUO Cycles for taper turning and thread cutting Technical Data Swing over bed: 320 mm Swing over cross slide: 150 mm Chuck: 200 mm Cross travel: 150 mm Feed drive AC: 4 m/min Main spindle: Size 6 Spindle bore: 52 mm Spindle mounting: MK 6 Spindle front bearing diameter: 85 mm Drive power: 7 kW Max. torque: 320 Nm Speed range: 14 - 3550 rpm Rcedpeyrggmefx Abpsf Gear stages: 2 Tool post: Multifix size B Quill: 70 mm Quill stroke: 120 mm Quill mounting: MK5 Dimensions Length / Width: 2600 mm / 1440 mm Weight: approx. 1440 kg

Condition: reconditioned (used), Year of construction: 2003, Universal Lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE control (SIMATIC PANEL TOUCH SCREEN) Year of manufacture: 2003 Spindle bore: 52 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Cross slide travel: 185 mm Infinitely variable speed range: 14 – 3550 rpm Including the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts 3-jaw chuck SCHUNK ROTA plus Ø 200 mm 2 sets of soft top jaws Coolant system Chip blow gun 6 machine feet Operating manual Rsdpfx Abexn Ar Aopjcf The machine is in very good condition!

Condition: good (used), mileage: 1,74,090 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, emission class: euro6, Year of construction: 2020, Field of application: Freight transport Engine capacity: 1.950 cc Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: Mercedes Benz Model: Vito 4x4 Emergency doctor vehicle Year of build: 2020 Condition: Used Data: First registration: 08/2020 Fuel type: Diesel Mileage: 174.090 KM Gear type: Automatic Drive type: all-wheel drive Engine power/displacement: 140KW / 1950 cm³ Total permissible weight: 3200 kg Environment badge: Green / Euro 6 Colour: White with Foil wrap Rcsdpszfzgyofx Abpof Equipment: Automatic front flashers, Automatic air-conditioning, Sitzplätze: 3, Airbag, Power windows and side-view mirrors, Central locking system, ABS, ESC, Radio, Power steering Information: After DIN 75059: Pressure chamber loudspeaker, Martin-System, LED-Signalsystem, Accident data storage, Thermal compartment, Refrigerator compartment, hands-free mobile phone system, Closet in the rear area, Doctor's seat, work table Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Maximum height 350 mm Turning length 1000 mm Maximum turning diameter over bed 600 mm Maximum turning diameter over cross slide 360 mm Spindle bore 107 mm Speed range 16 – 3150 rpm Feed rate range, longitudinal and transverse 0.5 – 5000 mm/min Rapid traverse rate, longitudinal and transverse 9 m/min Main drive 30 kW Machine dimensions with chip conveyor, L x W x H 5400 x 2200 x 2000 mm Weight 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT screen General description: CNC manual data input control with program input via function and numeric keys. Input of all information in dialog with the screen. Integrated menu system and display of all functions in plain text. Control panel, screen and handwheel in a separate chip guard. The EPL control offers the following possibilities: Programs can be entered and modified with direct operator guidance via the EPL control without program-technical preparation. NC programs in ISO/EIA standard can be entered, output or entered manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, transverse and contour turning, also with allowance. Threads. Chamfer DIN 509 form E and F and DIN 76, also grinding allowance can be programmed. Axial and radial grooves according to DIN 471 and 472, also with bottom chamfer. Radii 90° and chamfers 45°. Automatic tool radius compensation for cycles, chamfer, groove, radius, chamfer. Programming: Rsdovr Eh Ejpfx Abpocf Sentence-oriented, metric/inch, diameter with absolute input, radius with incremental input, full circle programming, subprogram technique, masking levels for program parts. Zero point offset. Selection of operating modes via menu. Program input and output: In dialog via menu with operator guidance or directly in dialog • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, of which 6 positions are standard tool holders + 6 positions are driven tool holders • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (more on request) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2006, operating hours: 11,773 h, functionality: fully functional, turning length: 650 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, spindle bore: 51 mm, mount diameter: 30 mm, overall weight: 3,000 kg, CNC lathe DMG NEF400 Year of manufacture: 2006 Control system: Siemens 840D Turning diameter: 350 mm Turning length: 650 mm Spindle bore: 51 mm 8-position tool turret Coolant system Chip conveyor Machine documentation Includes chuck and a set of hardened jaws VDI 30 Maximum spindle speed: 4000 rpm Rcsdpfx Aozk T Nksbpof Sale is only to commercial businesses, without guarantee or warranty. You will receive an invoice with the currently applicable VAT. The machine can be loaded.

Condition: good (used), Year of construction: 2003, cycle controlled lathe Machine type: DMG NEF 320 Control: Heidenhain Manual plus Rcodpfxoziza Io Abpef Year: 2003 Available after: sofort / now SPECIFICATIONS Max. turning length: 750 mm Turningdiameter: 320 mm Spindle bore: 52 mm Spindle speeds: 10 - 4.000 rpm Transmission ratio: 2 Spindle power: 9 kW Tailstock: MK 5 Power consumption: 14 kVA KW Machine weight: 2.800 kg Req. space (LxBxH): 2,45 x 1,67 x 1,83 m Equipment Collet chuck: Multifix B No chip conveyor No cooling through spindle

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 revolution per minute: 10 - 3000 / 2x seples U/min max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting Redpfx Aswtct Hobpjcf 8x foot plates 4x wedge lifters various pairs of jaws 1x steady rest Ø 100mm closed *

Condition: used, turning diameter over cross slide: 185 mm, turning length: 250 mm, turning diameter: 280 mm, spindle bore: 50 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 285 mm, total height: 1,730 mm, total length: 2,180 mm, total width: 1,610 mm, overall weight: 3,000 kg, General Application: The Gildemeister CT 20 is primarily used in precision machining, especially for the production of complex components in industries such as the automotive industry, aerospace, and general mechanical engineering. Due to its capabilities, it is suitable for tasks that require high accuracy and efficiency in turning operations. Advantages: - The compact design allows for efficient use of space in manufacturing environments. - The high spindle speed of 6000 rpm enables fast machining and reduces cycle times. - The versatile turret with 12 tools and 8 rotating tools increases productivity, as multiple machining operations can be performed without tool changes. - The robust spindle motor power of 7.5 kW ensures consistent performance even under heavy workloads. - The precise machine travels in the X and Z axes facilitate complex machining operations and contribute to high-quality production. Buffer battery is low, machine data needs to be checked! Rcedpfxezi Uqgj Abpjf

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Max. turning diameter over bed: 320 mm Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Multifix quick-change toolpost with tool holders Rsdpfoyh Hg Nsx Abpecf Documentation and accessories Machine is powered up and available for inspection

Condition: used, Year of construction: 2001, chucking diameter 250 mm greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 850 / 1350 mm control Heidenhain weight of the machine ca. 2700 t Rcedjw Syc Iopfx Abpof dimensions of the machine ca. 2900 x 1953 x 1825 m

Condition: used, Year of construction: 2003, turning diameter 500 mm turning length 1000 mm control Heidenhain weight of the machine ca. 3200 kg t Rcodpfxozc Ryrj Abpsf