Drymax D30-50-PDC

Wittmann

Condition: used, Year of construction: 2017, Serial no. 141342-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum daylight 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, screw L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection unit/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2020, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 15,564 Njdpfx Adsyc Symewskt This item is part of an online auction. Sale is subject to approval by the client.

Year of construction: 2020, condition: refurbished (used), 2 semi-gantry cranes for indoor operation expandable to full gantry crane span approx. 8.5 m hook paths approx. 6,0 m DEMAG monorail trolley Floor control system Nksdpfsmdrt Ssx Adwet

Condition: used, Year of construction: 2017, Ser.-No. 140228-100, Control system type Unilog B8, clamping force 1,800 kN, tie bar clearance 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, platen gap max. 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, min. mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 2 hydraulic core pulls, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2017, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 17,844 This item is part of an online auction. The sale is subject to the approval of the seller. Njdpfsyc Staox Adwekt

Condition: used, Year of construction: 2017, Ser.-No. 138524-100, Control unit: Type Unilog B8, Clamping force: 1,100 kN, Tie bar clearance: 470 x 420 mm, Mould installation height: 200 - 450 mm, Opening stroke: 380 mm, Maximum platen distance: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Maximum mould weight: 1,000 kg, Minimum mould dimension: 296 x 296 mm. Injection unit: Type 350, Screw diameter: 25 mm, Screw stroke: 175 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 85.9 - 220 cm³, Specific injection pressure: 1,595 - 3,000 bar, Maximum screw speed: 350 rpm, Screw torque: 340 - 500 Nm, Nozzle stroke/nozzle force: 250 mm/40 kN. Dosing unit: Manufacturer Movacolor. Injection/dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, Year 2017. Sprue picker/robot: Manufacturer Wittmann, Type WP80, Year 2018, Travel axes X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel: Manufacturer Metabo, Type SA250, L 25 m. Machine weight: 4,800 kg, Operating hours: 42,853. This item is part of an online auction Nsdpeyc Sqxefx Adwjkt Sale is subject to the approval of the client.

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80 Closing 25 TO Scrow 25mm Nkodpfx Ajhrw Amjdwjt Year of manufacture 2003 Sprue picker 2x PIECES

Condition: used, Year of construction: 2017, Serial no. 138522-100, control system type Unilog B8, clamping force 1,100 kN, tie bar clearance 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, minimum mould size 296 x 296 mm, injection unit type 750, screw diameter 35 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 5,200 kg, operating hours 36,180. Nodoyc Snkjpfx Adwjkt This item is part of an online auction. Final acceptance subject to the approval of the seller.

Condition: used, Year of construction: 2017, Serial No. 138264-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038. Nkedpfoyc Sh Dox Adwjt This item is part of an online auction. The sale is subject to the approval of the seller.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. Nkjdefzktzspfx Adwot with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: excellent (used), Manufacturer: WITTMANN Model: W818-8339 Year of manufacture: 2016 Nkjdpfx Adsx Eiufowst Type of equipment: Removal system / manipulator Movement range (X / Y / Z): X: 420 mm Y: 1,200 mm Z: 1,500 mm Equipment: Safety devices

Condition: excellent (used), Year of construction: 2017, Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of manufacture: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Nsdjyctdyepfx Adwokt Injection pressure: 2083 bar Dosing volume: 169 cc Clamping unit: Clamping force: 110 t Bar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - touchscreen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with Air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements The machine was serviced in Germany Robot Wittmann W818 Year of manufacture: 2015 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic Travel paths in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and the conveyor belt for an additional charge Dimensions: Weight: 4800 kg Length/width/height: 4.91x1.42x2.10 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Year of construction: 2025, condition: new, New FERBERG mobile loading ramp from the manufacturer The FERBERG mobile ramp from the manufacturer is used in warehouses for loading and unloading containers and vehicles using forklifts, carts, etc. The loading dock ramp is a bridge between ground level and freight transport. Provides direct access for the loader to the vehicle body. Warranty 18 months. Having a CE Standard. Delivery throughout the country. Flexible system of discounts. Specifications: - Load capacity of mobile ramp – 8000, 12000, 16000 kg; - Total length – 9400, 11900, 13400 mm; - Carriageway width – 2000, 2500 mm; - Working height – 900-1750 mm; - Carriageway surface – zinc-coated anti-skid grating; - Height adjustment – using a hydraulic pump; - A special tow pole is used to move the truck loading ramp; - Color – grey. Complete set: Nkjdoqxrhcepfx Adwjt - Mobile ramp – 1 pс; - Hand pump (made in Italy) – 1 pc; - Tow pole for transporting the ramp with a forklift – 1 pc; - Solid wheels – 2 pсs; - Rubber wheel chocks – 2 pсs; - Chains with carbine hooks – 2 pcs. Additional options: SL – Safety legs adjustable in height HR – Protective removable handrails TC – Tent cover CLR – Another color EHP – Electric (220V) hydraulic power station with a control panel EHBP – Electric (12V) hydraulic station with a battery pack Find out more on our website. The photos shown are for illustrative purposes only. For detailed sales information, please contact the manufacturer.

Year of construction: 2019, operating hours: 21,800 h, condition: ready for operation (used), controller manufacturer: BATTENFELD, controller model: UNILOG B8, screw diameter: 35 mm, This WITTMANN Battenfeld EcoPower 110/350 was manufactured in 2019. A robust electrical injection moulding machine featuring a screw diameter of Ø35 mm and an injection volume of 168 cm³. With tie bar spacing of 470 x 420 mm, it's currently producing with polystyrene. Total working hours are approximately 21800, maintaining a very good technical condition. Contact us for more information about this machine. • Injection volume: 168 cm³ Nkodpsyca Skofx Adwst • Tie bar spacing: 470 x 420 mm • Number of cores: 1 core • GK: x4 • Total working hours: approx. 21,800 h • Machine currently in production: Yes • Material: Polystyrene (PS) • Technical condition: Very good

Condition: excellent (used), Year of construction: 2010, Wittmann W853 Linear Z=4000mm , payload: 41,5 kg Nkodpfx Aswnfmfodwst Number of axis: 3 X: 1500 mm Y: 2600 mm Z: 4000 mm \+ C axis pneumatic Reach: 4000 mm Payload: 41 kg Robot has NEW CPU + batteries , fully tested by Wittmann technician in our showroom.

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle Nkedpfx Adolz Rvlowet 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Number of axis: 3 Reach: 1500 mm Payload: 6 kg Nkodpsyaq T Tjfx Adwjt