Center lathe

WMW DLZ 800 III

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Podpfx Ajxl S Uhsphsgr

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm Pgsdpfxoy S Duvs Aphor spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Power 45 KW The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm Podpow Rf S Ssfx Aphogr max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm Psdpfjk Dz N Ijx Aphogr max turning diam 1100mm range of turning diam 460-1250mm

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Pjdpfxsd Nw Ttj Aphjgr Main motor power 15 Cv

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Pgsdpfx Apjy Icbaehor

Condition: used, total height: 1,800 mm, total length: 3,500 mm, total width: 2,300 mm, Empty weight: 5.800 kg Price: On request Grinding diameter: 315mm Grinding depth: 500mm Swing: 500/600mm Stroke of table: 800mm Pgedpfx Apowya A Sehor - Documentation available: No - CE certificate present: No - Serial number: 31577 - Drive system: Conventional - Grinding diameter [mm]: 315 - X-axis travel [mm]: 800 - Transport dimensions: 3500mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 5800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, We are selling this lathe. Accessories included: steady rest, additional milling attachment. Turning length: 8000 mm Diameter over bed: Ø 2020 mm Diameter over cross slide: Ø 1600 mm Spindle bore: 120 mm Spindle speed/ranges: 180 rpm Spindle power: 80 kW Pedpfjx Auwgsx Aphjgr Tailstock spindle: Ø 400 Spindle travel: 250 mm Dimensions: Length: 15360 mm Width: 3520 mm Height: 2600 mm Weight: 78000 kg The machine is located in the area of the former Vítkovice Foundry in Ostrava, Czech Republic. The machine is connected and can be tested. We can send a video of the machine via WhatsApp.

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° Pgsdpfx Aen D N H Tspher • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unilog 4000 Closing force 60 tons Year of manufacture 1997 Screw diameter 30 mm Shot weight approximately 90 g Pedpjg Emvhefx Aphjgr