High Lift stacker

Yale MS16AC+

Condition: used, Year of construction: 2016, operating hours: 507 h, load capacity: 1,600 kg, lifting height: 4,430 mm, fuel type: electric, construction height: 1,930 mm, Yale High Lift Pallet Truck Yale * Model MS16IL AC * Total weight 1193 kg, without batteries 887 kg * Lifting capacity 1600 kg * Electric drive via battery with external charger (permanently mounted) * Dimensions (LxWxH): 2100 x 900 x 1930 mm * Forks 114 x 195 x 95 mm Fpsdpfx Agjy Ag R Iefof * Lift height 4430 mm * 507 operating hours shown on the meter * Year of manufacture: 2016 * Forks are bent ----This description does not constitute a binding offer and may contain errors. No guarantee for the information provided. Please also visit our homepage

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer crossfeed splicing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Compressed air 6 bar Glue types PVAc or UREA based Fpjdpfx Agjumrf Aofof

Condition: new, functionality: fully functional, machine/vehicle number: HR35372, Year of construction: 2024, load capacity: 1,600 kg, lifting height: 4,900 mm, free lift: 1,618 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork length: 1,150 mm, total length: 2,005 mm, drive type: Elektro, construction width: 790 mm, High lift truck Chassis number: HR35372 Load centre of gravity: 600 Fork width: 570 mm Fork thickness: 55 mm Mast type: Triplex Condition: New device Technical condition: New Front tyres condition: New Rear tyres condition: New Battery voltage: 24V Battery Ah: 375Ah Battery type: PzS Fodpsyl Dtwsfx Agfspf Battery year of manufacture: 2024 Battery condition: New Description: 12 months factory guarantee / max. 2000 operating hours Full free lift, CE certificate,

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Tape (paper) width 6 mm Fpsdpfeumrgaox Agfsf Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Roll (width) 65 mm Tape running meter 3200 m Electric energy 1,1 kW Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: new, Spindle diameter 90 mm Fodjd Nluwjpfx Agfspf Diameter of sawblades 255 mm Cutting width 1600 mm Cutting height 0-50 mm Motor power 37 kW Speed 2800 r/min Feed speed 0-15 m/min. Feeding motor 3 kW Delivery term: ~ 3 months.

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works. Fpedjwx Rrnopfx Agfjf

Condition: good (used), Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - Norme CE Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Fodpfov Igtbex Agfopf Presser width mm 340 ideal for blocking any type of veneer Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Fedpfev Sthgox Agfjpf Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 140611/3, Fisher + Rückle Gluemaster - glue applying machine. Machine is 100% functional. Fpsdpfxeum R Age Agfof

Condition: used, Year of construction: 2000, machine/vehicle number: 2852, SECOND-HAND GLUE SPREADER OSAMA TYPE S2R1300 - 1300 MM. - CE RULES - Chiller (Heat conditioner) HITEMA ECA 010/CHP 3 Cooling system for vinyl glue, urea glue and polyurethane glue for rollers gluing machines with two and four rollers. This device is required to maintain the glue temperature between the rollers always constant, and to ensure the scheduled pressure time even with high temperatures - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Automatic washer for rollers Fsdpfx Aget U Iupjfepf - volt. 380/50 - sn 2852 - year 2000