Used Matsuura Ra 1 for sale (45)

Condition: ready for operation (used), Matsuura RA-1G RA-IG Machining Center X axis: 550mm Y-axis: 410mm Z-axis: 460mm RPM: 15000 RPM Cone: 40mm Steering: yasnac Year of construction: 1999 Transport dimensions: 250x270x235 cm (LxWxH) With pallet changer With tool changer 30 pieces Dcodpjtt Sxdefx Anqei with chip removal Video available on request! Location: Hamont-Achel, Belgium Matsuura RA-1G RA-IG Bearbeitungszentrum X axis: 550 mm Y-axis: 410 mm Z-axis: 460 mm Speed: 15000 U/min Cone: 40 mm Kontrollen: Yasnac Construction year: 1999 Transport dimensions: 250x270x235 cm (LxWxH) with pallet handler Mit Werkzeugwechsler 30-teilig with clamping device Video auf Anfrage erhältlich! Standort: Hamont-Achel, Belgium Matsuura RA-1G RA-IG Machining Center X axis: 550mm Y axis: 410mm Z axis: 460mm Speed: 15000 RPM Cone: 40mm Controls: yasnac Year of construction: 1999 Transport dimensions: 250x270x235 cm (LxWxH) with pallet changer With tool changer 30 pieces with chip removal Video available on request! Location: Hamont-Achel, Belgium

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2000027, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 30 kVA, torque: 150 Nm, controller manufacturer: fanuc, controller model: FANUC 31İ-MODEL B, workpiece length (max.): 1,200 mm, workpiece width (max.): 600 mm, table width: 600 mm, table length: 1,200 mm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, documentation/manual, MATSUURA VX-1000 1200x600mm 15,000 RPM. Our machine was purchased specifically in 2014 for a precision job. It has never been used for rough machining. It has low operating hours. If you have any questions or need further information, please send us a message or call us. Dcodpfezgv Izox Anqsi

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: Fanuc, Velocity Control Unit from machining center Matsuura MS-710 V -Type: A06B-6035- H315 H316 -Dimensions: 500/250/H160 mm -Weight: 8.4 kg Djdpfx Anohtn R Tjqeci

Condition: good (used), Year of construction: 1998, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total length: 1,150 mm, total width: 510 mm, 3-axis CNC machine (VMC) Matsuura - MC-1000 VG X - Travel: 1020mm Y - Travel: 550mm Z - Travel: 510mm Table Length: 1150mm Table Width: 510mm Feed rate X-Axis:15000mm/min. Feed rate Y-Axis:15000mm/min. Feed rate Z-Axis:15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:30kW Speeds / ranges:15000Rpm ATC / revolver: 30 Chip conveyor: yes Length: 2800mm Width: 2500mm Height: 2800mm Djdpfx Anewvhvfsqsci Weight: 6800kg

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Dcedey H Igrspfx Anqei Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 10394, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 21 kVA, controller manufacturer: YASNAC, total height: 3,000 mm, total length: 5,000 mm, total width: 2,400 mm, table width: 380 mm, table length: 750 mm, overall weight: 5,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 8,000 rpm, mount diameter: 40 mm, input voltage: 415 V, input frequency: 50 Hz, input current: 29 A, Equipment: chip conveyor, documentation/manual, MATSUURA MC 510 VGM CNC vertical machining centre - Tool holder: SK 40 - Table with three T-slots - Includes the tool holders currently in the magazine! Dcedpfxjy I Tkre Anqsi - The machine is equipped with a tool changer, as well as a transformer and two chip conveyors Attention: The item must be collected on a binding date to be agreed between 24/08 and 27/08/2026. FCA D-61352 Bad Homburg – loaded onto truck

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 max workpiece dia x height 330 x 300 mm Movement X-axis 435 mm Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Spindle taper MAS BBT 40 Dcodpfjy Ny Akex Anqei Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Year of manufacture: 2002 Width: 1000 mm Length: 400 mm Height: 700 mm Number of axes: 5 Dcodpfx Anex Uwr Tsqsi Tool holder: SK50 Spindle speed (rpm): 15,000 Machineable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 981113378, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, torque: 518 Nm, workpiece weight (max.): 900 kg, total height: 3,267 mm, total length: 5,850 mm, total width: 4,860 mm, overall weight: 18,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 20,000 W, type of input current: AC, Equipment: documentation/manual, The manufacturing machine will be available in January 2026! Control type: YASNAC CNC control J300M. We are happy to assist you with inquiries by phone. Dcsdpfx Anjw Sv Itoqsi

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, 5-AXIS MATSUURA MAM72-25V VMC Category: Vertical Machining Centers (VMC) Reference No.: 3651 Year of Construction: 2004 Technical Specification: SPINDLE Spindle Taper : BT 40 WORKING CAPACITY Travels (XYZ) : 550 x 410 x 450 mm CNC Djdpfx Ansx Anlwoqsci Control : Fanuc 30i

Year of construction: 2011, condition: excellent (used), 5 axes machining center FANUC G-Tech 30i Working travels 550x410x450mm Dcsdsgufmrspfx Anqji B-Axis table +/- 110° A-Axis table 360° Spindle taper BT40 Big Plus Spindle speeds -15000 rpm Tool changer 40 pos Palett places 2x Durchmesser 250mm Coolant through spindle 3D measuring probe Tool measuring device Paletts no 15 Tool holders approx 80x KNOLL / TURBO coolant device MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, The Matsuura MAM72-25V belongs to the well-known MAM72 series and was specifically developed for automated and unmanned 5-axis machining. It is ideally suited for complex workpieces with the highest requirements for precision, process reliability, and cost-effectiveness. The machine combines a compact machine concept with automatic pallet change, a large tool magazine, and simultaneous 5-axis machining. This makes it ideal for single parts, small series, and series production. The MAM72 series is particularly well-established in the following industries: Aerospace Medical technology Precision engineering Tool and die making Mold making Mechanical engineering Automotive Precision technology Dcjdpfjziy Rrex Anqei The MAM72 series was developed by Matsuura specifically for long, unmanned operation and offers high flexibility with a small footprint. Highlights: ✔ Simultaneous 5-axis machining ✔ Automatic pallet change ✔ Ideal for unmanned manufacturing ✔ Very high precision ✔ Direct drive of the rotary axes ✔ Fanuc control ✔ High process reliability ✔ Short tool change times ✔ Compact footprint ✔ Ideal for multi-machine operation ✔ Excellent for complex components ✔ High repeatability

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: Fanuc, Velocity Control Unit from machining center Matsuura MS-710 V -Type: A06B-6035- H422 H423 -Number: 2x servo module available -Price per piece -Dimensions: 500/260/H155 mm Dcsdpfx Ashtryisnqji -Weight: 6.6 kg

Condition: used, Year of construction: 2001, machine/vehicle number: 010614780, Serial No. 010614780, travel range X/Y/Z/B/C 680 x 400 x 625 mm +65 - -110 x 360 °, 2 pallet tables, workpiece clamping device, bridge, swiveling, 40-position pallet storage, workpiece setup station, control system, manufacturer: Fanuc, type 16i-M, chip conveyor, manufacturer: Mosnic, 240-position tool changer, coolant system, chip container, setup station, control system, manufacturer: Fanuc, type 16i-M, chip conveyor, manufacturer: Mosnic, chip tank, 240-position pallet changer, coolant system, chip container. Dodpozgvnhofx Anqsci

Condition: good (used), Year of construction: 2003, Machining center Manufacturer: Matsuura Type: H Plus 405 PC6 Year of manufacture: 2003 CNC control: Fanuc G-Tech 16i Djdpfxsltlx No Anqeci Travel distances: X/Y/Z: 600 x 600 x 600 mm Table size: 500 x 500 mm 6-position pallet changer Tool magazine: 120 positions 4th axis Knoll high-pressure system Internal cooling: 70 bar 23626

Condition: used, Year of construction: 2012, x-travel 0760 mm y-travel 845 mm z-travel 760 mm control 840DI Siemens table-size 500 x 500 mm feed 0- 60 m/min workpiece weight max. 350 kg Djdpfxeywntgo Anqsci type of pallet-changer 4 St. milling head speed 12000 U/min numbers of tools in magazin 320 tool taper 63 HSK A- axe (swivel) 30- 120 ° B- axe (turning) 360 ° total power requirement 83 kW weight of the machine ca. 15 t dimensions of the machine ca. 6 x 4 x 2,5 m 5 axes machining center with swivable and turnable table. Coontrol Siemens 840 DI. Machine will be supplied with many spare parts. Machine has cooling through spindle, dust exhaust and a 4 pallet exchange storage. We will deliver a measuring tracer along with the machine.

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 560 mm z-travel 500 mm Control Matsuura G-Tech 30i max. turning speeds 20.000 min/-1 number of tool places 210 Pos. total power requirement 52 kW In our assessment, the machine is in good used condition and can be inspected Dsdpfjyigalex Anqoci under power by appointment. Technical features: - 5-pallet changer - new spindle including ceramic ball bearings - new spindle cooler Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAM 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° Dcedpfxjy I Sfhe Anqji - Distance between pallet surface and spindle reference line: -20 to 430 mm - Distance between B-axis center and spindle reference line: 4 - 410 mm - Distance between B-axis center and spindle reference line: -10 mm - Distance between pallet center line and bed 0-point: 265 mm - Distance between pallet center line and Y 0-point: 180 mm - Internal diameter of the spindle bearing: 70 mm - Tool clamping force: 7.0 kN - Feed rate B-axis: 30/min - Feed rate C-axis: 50/min - Max. tool diameter: 80 mm, with free secondary stations: 150 mm The machine is equipped with a chip conveyor and a coolant system. Note: includes the tool holders located on the tool changer! Note: the machine can be transported on a truck up to 2700 mm wide! Note: the item must be picked up between August 24 and August 27, 2026, on a date to be determined. FCA D-61352 Bad Homburg - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table load: 750 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 120, number of axes: 4, This 4-axis Matsuura H.PLUS-500 was manufactured in 2008. It features a continuous table with 7 ground pallets, X, Y, and Z-axis travels of 800 mm, and a B-axis with 360° continuous indexing. The machine has a maximum workpiece diameter of Ø850 mm and a maximum workpiece height of 1050 mm. If you are looking to get high-quality machining capabilities, consider the Matsuura H.PLUS-500 horizontal machining centre we have for sale. Contact us for further details. • Axes/Travels: B-axis 360° (continuous/indexed) • Pallet system: 2 pallets; pallet size 500 × 500 mm • Workpiece capacity: max diameter Ø850 mm; max height 1050 mm Additional equipment • Continuous table • 7 ground pallets Dcedpfx Aney U Hndjqji Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, total height: 2,648 mm, total width: 5,500 mm, table load: 100 kg, overall weight: 5,500 kg, spindle speed (max.): 46,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 10, tool weight: 1,500 g, product length (max.): 2,700 mm, number of axes: 3, This 3-axis Matsuura LV-500 was manufactured in 2017. It features a maximum spindle speed of 46,000 rpm and a robust table size of 540 x 350 mm with a maximum table load of 100 kg. The machine is equipped with a tool magazine capacity of 10 tools and rapid traverse rates of 90 m/min. If you are looking to get high-quality machining capabilities, consider the Matsuura LV-500 vertical machining center we have for sale. Contact us for further details. • Control: L-Tech 30iB • Table: • Size: 540 × 350 mm Dodpfsy Uwv Eex Anqsci • T-slots: 18 mm (3 slots) • Distance table to spindle nose: 150 – 450 mm • Spindle: • Taper: BT30 BIG-PLUS • Motor: 7.5 / 15 kW • Max torque: 8.86 Nm @ 15,000 rpm • Direct drive • Feed rates: • Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min • Cutting feed: 35,000 mm/min • Minimum increment: 0.0001 mm • ATC (Automatic Tool Changer): • Tool taper: BT30 • Max tool diameter: 46 mm • Max tool length: 150 mm • Tool-to-tool time: 2.2 s • Chip-to-chip time: 5.2 s • Accuracy: • Positioning accuracy: ±0.001 mm • Repeatability: ±0.0005 mm • Power requirements: • Power supply: AC 200/220V ±10% • Required power: 35 kVA • Frequency: 50/60 Hz • Air pressure: 0.54 – 0.93 MPa • Air consumption: 430 NL/min • Tank capacities: • Coolant: 320 L • Oil cooler: 9.5 L • Oil: 1.8 L • Hydraulic: 25 L • Standard equipment: • Spindle oil cooler • Coolant unit • Chip flush • Linear motor cooler • Scale feedback • Air dryer • Synchronized tapping • Work light • Automatic grease lubrication • MIMS system (Matsuura Intelligent Meister System) Technical Specification Taper Size BT 30

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 760 mm, travel distance Y-axis: 845 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 20,000 rpm, number of axes: 5, This 5-axis Matsuura MAM 72-63 V was manufactured in 2008. It features impressive travels with an X-axis of 760 mm, Y-axis of 845 mm, and Z-axis of 610 mm. The machine includes a maximum workpiece capacity of Ø800 mm × 450 mm height and a tool magazine with 150 positions. If you are looking to get high-quality machining capabilities, consider the Matsuura MAM 72-63 V vertical machining centre we have for sale. Contact us for further details. • Rotary axes: A +110° / -110°; C 360° • Table/work area: • Max workpiece: Ø800 mm × 450 mm height • Table to spindle nose: 120 – 730 mm • Feed rates: • Rapid traverse (X/Y/Z): 50,000 mm/min • Cutting feed (X/Y/Z): 1 – 50,000 mm/min • Accuracy: Minimum increment 0.001 mm • Tooling: Tool magazine with 150 positions • Other: Spindle hours 23,000 h Additional equipment • Twin pallet system • Workpiece probe • Tool probe • High-pressure coolant (50 bar) • Filtration system Dcodpfeyzzq Hsx Anqoi • Chip conveyor with drum filter

Condition: used, Year of construction: 2015, operating hours: 12,440 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 185 mm, nominal power (apparent): 30 kVA, spindle speed (max.): 42,000 rpm, input voltage: 415 V, type of input current: three-phase, Matsuura Lumex Avance-25 – Hybrid Additive Manufacturing System (used) For sale is a Matsuura hybrid additive manufacturing system, Lumex Avance-25. The system combines additive manufacturing (metal – sintering, SLM, LPBF) and simultaneous machining (milling) in a single process. This makes the system particularly suitable for applications where functional surfaces or precise geometries are to be machined directly after the build. The system is designed as an open system: build parameters can be adjusted and further developed according to one’s own discretion and based on one’s own experience. This also makes it ideal for research purposes and for developing new material and process parameters. The Lumex Avance-25 is available in a titanium specification; the air filter and extraction system are explosion-proof for powder handling. The following powder types can be used: Martensitic steel II (1.2709) Stainless steel 630 Stainless steel 316L Cobalt chrome Nickel alloy 718 (Inconel 718) Aluminum Si10Mg Titanium 6AI4V (with appropriate shielding gas supply) It is possible to build with other materials or powder types if the build parameters are developed accordingly. Details Year of manufacture: 2015 12,439 spindle hours 3,476 laser hours Possible build size approx. 250x250x180 Max. table load 90 kg Laser power 40-400 watts (variable) Laser wavelength (nm) 1070 +/-5 Tool positions for milling tools: 20 Accessories Dcodsy Drwvspfx Anqji Lumex CAD / CAM system Basic and advanced function for sintering Basic and advanced function for milling Geometry processing Simulation Generation of process data Transfer of process data Support function for machining and quality Price has been reduced!

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Dsdelz Rvlepfx Anqjci Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 400 kg, total height: 2,640 mm, total length: 5,870 mm, total width: 3,440 mm, overall weight: 11,300 kg, table length: 500 mm, table width: 500 mm, rotational speed (min.): 15,000 rpm, Equipment: documentation/manual, Horizontal machining centre CNC Control Matsuura G-tech 16i Pallet table size 500x500 mm Movement X-Y-Z-Axis 600x600x600 mm Magazin capacity 240 Dcodjy N Awdspfx Anqoi Number of pallets: 6 Table load 400 kg Spindle speed 15000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Year of manufacture: 2004 Width: 600 Length: 600 Height: 600 Dcsdpfjx Tzafjx Anqji Number of axes: 4 Tool holder: SK40 Spindle speed (RPM): 15,000 Processable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK