Quad Shaft Shredder

ZŁOMIARZE Recycling Technology Shredder MCW 52/MCW 76

Condition: new, cutting diameter 225 mm Dsdpfxegxi D Tj Aizecp saw band length 2455 mm table height 850 mm cutting width 245 x 150 mm cutting speed 45/90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 90 mm 90 mm 145 mm Impact energy 145 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,2 t dimensions 1,43 x 0,72 x 1,7 m Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Djdpfx Aieua Tbwszecp Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm Dcodpor Ak Rgefx Aizjp main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, The granular mixer is available in 6 versions: The version can be made of stainless steel or coated steel: Technical specifications: MV 2 The MV 2 is designed for the complete mixing of the entire plastic granulate, due to the forced guidance provided by the screw sleeve. Container capacity: 120 kg / 200 L L x W x H: 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Screw, removable - Control for mixing times - Extraction device - 1 drain - Mobile base frame, running rollers 100 mm, all with parking brake. Djdpfxjd R Atro Aizjcp

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 12254 B521 860, Overheadcrane ± 10.500 mm x 12.500 kg Djdpfxsv Ip Ege Aizecp

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Dcedpfx Aijqmi Irezop Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Djdpfxeivptho Aizocp Model -WL6S Main motor -22kw

Year of construction: 2026, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. Dcedpsin Ey Sjfx Aizsp - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 3,400 mm, total width: 2,400 mm, total length: 3,900 mm, overall weight: 6,000 kg, input voltage: 380 V, power: 80 kW (108.77 HP), rotary shear 2 shafts - 2 motors 40kw - inversion in case of jam - shredding chamber 1100 x 900 - thickness of new knives 80 - 5 tons - large loading hopper - possibility of loading Dedpfx Ajh Diwujizecp very versatile and very powerful, can pre-grind organic matter for methanizers, copper cables, lumps, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, hollow bodies, etc. use to grind up sick calves at the renderer.

Year of construction: 2002, condition: reconditioned (used), Fully automatic tenon and mortise system: Double-Pack type with automatic feeding with multiple cross-cutting saw with stacking system Dcedsg D Ugkspfx Aizop Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm tenon size: hardwood 120 cm² softwood 150 cm² Tenon design: vertical and horizontal Adhesive type: PVAC white glue, two-sided adhesive application Electrical power: Connection voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tenon length / optional wood cross-section and adhesive type can still be adjusted. Performance: 6 milling stations/min Working height: 960 mm Table width: 600 mm Adhesive application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the