Surface grinding machine 600 x 220 x 540 mm

ZIERSCH ZT 24

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 600 mm, feed length Y-axis: 220 mm, feed length Z-axis: 540 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 3,000 m/min, table length: 400 mm, table load: 250 kg, table width: 250 mm, Surface grinder Ziersch - ZT 24 MACH-ID 9344 Make: Ziersch Type: ZT 24 Control: Mitsubishi TOUCH Panel Year: 2010 Sturdy, cast iron execution of all machine components High machine weight for maximum rigidity Preloaded precision linear guideways in the vertical- and cross axis (Bosch Rexroth) for highest accuracy Scraped and turcite coated slideways in the longitudinal axis provide excellent vibration absorption and a high-quality grinding surface pattern. Hydraulic longitudinal motion with return cooling unit to achieve good surfaces Electro-mechanic cross- and vertical motion Measuring systems in vertical axis (Heidenhain) for precise positioning Iajdpfsx Sw H Eox Adwjl Maintenance-free paper band filtration unit with up to 500 l tank and 2-bar pressure pump for effective cooling and rinsing Integrated rinsing channel Magnetic separator for prefiltration of the paper band filtration unit Infinitely variable grinding spindle motor Machine lamp Table-mounted dressing device for high precision and surface finish Electro-permanent magnetic chuck (SAV) with integrated pole changing unit and traction regulation Partial encapsulation of the machine with sliding door and a service door Effective splash guard and an excellent accessibility Preparation of the machine for installation of a coolant mist exhaust unit Control system features: Very comfortable and easy to operate Z-control Automatic vertical infeed with dressing amount compensation Fully automatic grinding cycle with dressing cycles Easy operation via touchscreen Large and clear colour screen (10.4") Electronic handwheel, usable in vertical- and cross axis X - Travel: 600mm Y - Travel: 220mm Z - Travel: 540mm Table Length: 400mm Table Width: 250mm Table load: 250 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Grinding stone dimensions:250 x 38 x 50,8mm Power: 3,7kW Speeds: 4500Rpm Cooling system: Yes Feed rate Y-Axis: 30000mm/min. Length: 3050mm Width: 2050mm Height: 2510mm Weight: 2900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2011, condition: reconditioned (used), Boschert tool grinding machine EASY SHARP Equipped for Trumpf tooling system (Amada system optional) Machine for punching tool maintenance with cooling system and especially powerful motor, therefore also suitable for use with diamond grinding wheels. Used machine is currently being overhauled Equipment for Trumpf tooling system up to size III Accessories: Tool holder for punch flat and whisper Die holders for size I, II and III Iedpfx Adjid I T Iswsal New corundum grinding wheel Dressing diamond Cooling system and machine base revised Technical data: Grinding wheel diameter 175 mm height adjustment 150 mm working area 400 x 150 mm motor power 2,2 kW Motor speed 2825 rpm Optional adapter for Amada system available Pictures similar

Condition: excellent (used), Year of construction: 2014, Surface grinding machine Manufacturer: Ziersch Type: ZT 24 Year of construction: 2014 Control system: Mitsubishi GOT-1000 Technical data of the vehicle: ----- - Travel X/Z: 400 / 250 mm - Magnet: 400 x 200 mm P9 - Table load max.: 250 kg - Distance from center of grinding wheel to table: 540 mm - Y-axis with direct path measuring system - Grinding wheel: 250 x 38 mm (50.8 mm bore) - Gradual grinding spindle control 1,000 to 4,500 rpm Isdpfx Adspwkt Iewjal - Grinding spindle new in 04-2024! - V-constant - automatic vertical infeed with compensation of the dressing amount - Coolant device / paper belt filter - Magnetic separator - Weight: approx. 2,900 kg - Dimensions: 2,600 x 1,800 x 2,350 mm Accessories: ----- - Documentation - Handwheel

Condition: good (used), Manufacturer ESTARTA Model 301 MV Condition Used Stock number 4576 Location Badajoz, Spain Dimensions 1520x1020x1260mm Weight 1550 kg Opening between grinding wheels 1,5/50mm Max. grinding wheel width in plunge grinding plunge 125mm Dimensions of the working wheel (od x id x width) 300x125x175mm Øext.min. working wheel working wheel 220mm Max. depth of profile of working profile depth 8mm Dimensions of the driving wheel (od x id x width) 220x125x125mm Øext.min. of driving wheel drive wheel 165mm Max. depth of profile of the driving wheel Ijdpfxor Ezfpj Adwoal profile depth 8mm Grinding wheel motor power motor power 7,5Kw Motor power of grinding wheel driving motor power 0.75Kw Tilting angle angle of working working +/- 5º

Condition: new, sheet thickness steel (max.): 4 mm, - Capacity 4 mm - Adjustment of the hydraulic roller - foot switch - Brake motor - With 4 roller sets - Emergency stop Iodpogg Nq Hefx Adwsal - 400V

Condition: like new (used), Year of construction: 2011, operating hours: 9,080 h, functionality: fully functional, For sale: Well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approx. 9,000 operating hours! Travel axes X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and accessories: - Tool turret: 12 stations, all powered - Driven tool speed: Max. 10,000 rpm - Parts catcher - Electrical connection: 400 V - Power consumption: 37.6 KVA - Internal cooling: available - Main spindle chuck: Kitagawa BB210AB - Sub-spindle chuck: Kitagawa B206A521F - Swing diameter: 366 mm - Turning length: 705 mm - Spindle bore: 80 mm - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Main spindle power: 18.5 kW - Sub-spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - Tool measurement system in the working area - Manually deployable measuring arm for sub-spindle - Short bar loader, manufacturer: LNS - Includes tools: 8 fixed tools, 3 driven tools - Includes extraction system, brand: Indusa - Includes complete documentation Iajdpfx Ajxzqhredwsl Machine available immediately! Machine has been fully cleaned and inspected! We will undertake loading of the machine! Transport can be organized upon request!

Condition: used, throat depth: 610 mm, Pressing force (72 kN) with 610 mm dept Automatic lower tool changer with 4 stations Iaedpfx Adoxfi Npjwel Automatic upper tool changer with 4 stations Reliable and energy-efficient thanks to fully hydraulic system Equipped with patented safety system as standard Advanced control with touch screen and automatic press-in fastener length control Equipped with 2 * MAS-350 modular feed systems for press-in elements

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min c-axis 0,001 ° Grad gripping station 32 turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 4+7+6+10 =27 number of milling stations 4+4 control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. Iodpfxew Ed Tfo Adwjal chip conveyor ja/yes LNS total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachment: all comes with. It is the only one in the production.

Condition: used, TECHNICAL DETAILS - distance between centers : 600 [mm] - center's height : 175 [mm] - table orientation : 11 [°] Iodpfxeuhbywe Adwjal UNIVERSAL GRINDING WHEEL HOLDER HEADSTOCK - left grinding wheel dimension : 400 x 50 x 127 [mm] - right grinding wheel dimension : 225 x 20 x 76,2 [mm] - motor power : 3 [kW] - spindle speed : 1500 / 1700 / 2200 - grinding-wheel holder headstock orientation : 270 [°] PART HOLDER HEADSTOCK - part-holder headstock orientation : 360 [°] - spindle speeds : 20 - 400 [Rpm] - internal taper : Morse 5 - motor power : 0,9 [kW] TAIL STOCK - internal taper : CM4 - quill stroke : 30 [mm] DIMENSIONS - floor surface : 2580 x 1680 [mm] - height : 1670 [mm] - weight : 2200 [kg] EQUIPMENT - FISCHER internal spindle: 14,000 [rpm]

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg Iasdegulr Hopfx Adwsl