Paper cutting machine

ZUND L 1200

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Njdpfotyy Sfex Ag Njku Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Additionally, 6 Bar air Nodpfx Agew Ic H Ie Nsku A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Expanding shaft for attaching the foil, mounted on a tilting arm. Touch panel for easy operation. Sheet straightening module. Receiving table. Ask about the product

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Nkedpfx Asif Ek Rog Nju Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, load capacity: 210 kg, arm reach: 3,100 mm, Our industrial robots are thoroughly inspected and tested before delivery and are ready for immediate use. Njdpfx Agjwlz Dbo Njku Robot comes complete with: - Control cabinet - Teach panel - Connection cable

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input Nedpfx Asvphiyog Neku * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: used, Year of construction: 1999, Roland R704 3B Year: 1999 Color 4 0 / 2 2 Imp count: 163 mil Max speed: 15.000 sh/h Nkjdpeycv U Iofx Ag Nou APL Blanket Washing System - with Brush Ink Roller Washing Ink Temp control - Without Chiller Tehnotrans Steel plate in feeder and delivery Suction feed board powder sprayer Technotrans Beta refrigeration Axial circumferential diagonal register remote control Automatic format adjustment Color Pilot Control Sheet decurler Air Glide delivery Tape inserter at delivery In production Available immediately

Condition: used, Year of construction: 2002, Offset 5 color Roland 505/OB Year: 2002 Number of impressions (mio): 126 Machine control - RCI JobCard Feeder - Suction feeder table - Steel plate in feeder Printing units - Number of printing unit(s): 5 - Straight machine - RolandMatic - SAPC Semi Automatic Plate Change - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Cooling system: Technotrans Nodpsxtadaofx Ag Neku - Ink temperature control Delivery - Non-Stop delivery: prepared - Powder spray

Year of construction: 2018, condition: good (used), functionality: fully functional, machine/vehicle number: H3000TM, Universal testing machine H3000TM Made in Germany Crosshead stroke: 520 mm Working area depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm / min Return speed: 500 mm / min Travel resolution: 0.01 mm We have a very large selection of clamping fixtures - screw clamping fixtures - wedge clamping fixtures - pneumatic and hydraulic clamping fixtures. Pressure plates-bending fixtures-friction fixtures and much more. Strain gauges-extensometers-long displacement transducers-clamp-on transducers-clamping chambers. Force transducers optionally 50N-100N- 200N- 500N- 1000N- 2000N- or 3000N incl. Hess software Windows 8-9-10 or 11 for universal test sequences, simple tests even without a PC and a 5KN SP 56g screw clamp with pyramid or rubber jaws 30x50 mm Factory calibration certificate with DAkkS calibrated measuring equipment. In tension and compression direction in 10 steps. The universal testing machine of the H3000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a membrane keypad. The force and travel are shown on the 2-line LCD display. The testing machine can be used as a standalone unit or with a PC via a USB interface. The displacement is measured using an encoder with 0.01 mm visible resolution on the LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Nsdpfx Aet Rg H Aeg Noku Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travel ranges, 500 mm or 1200 mm (with load cell without test tool). Additional scope of delivery: A load cell of your choice 50N-100N-200N-500N-1000N-2000N or 3000N, certificate 220 volt cable, USB cable, description, CE declaration of conformity. Load cell 3000N Measuring range:1-3000N tension and compression, with nom. 2mV/V Output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, reproducibility: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Nedottbd Nepfx Ag Njku

Condition: good (used), Year of construction: 2000, Offer consisting of: Heidelberg Speedmaster SM102-2P, year of manufacture 2000, impression count 202 million, CP2000 Center, Autoplate, Technotrans, new rollers in 01/26. Nksdjymgdzopfx Ag Neu