25 running meters pallet rack Nedcon

25 lfm Palettenregal Nedcon H 3,5 m T 110 cm Auflast /Fach 3050 kg

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Fpodpfx Ajydpxvop Djn Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Fpedpfowv Hnmox Ap Don Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm table surface area 900 x 630 mm ram surface 850 x 450 mm Fpjdpfxev Rgwxj Ap Dsn clamping pivot 50 H7 / 85 mm total power requirement 17 kW weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m

Year of construction: 2020, condition: new, The Sapphire is the optimal solution for the heavy industry, handling material thicknesses up to 200 mm. It enjoys great popularity in a variety of production facilities – often those operating in three shifts – as well as in all applications where stability, efficiency, and process reliability are particularly important. Thanks to its high-quality equipment, the system is a versatile tool for the highest demands and a helpful instrument for process optimization. Having been deployed in over 400 industrial facilities worldwide, the Sapphire cutting system proves its worth every day. Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Extraction table 3000 x 6000 mm - Extraction system PFC 6 incl. extraction ducts - Delivery, assembly, and commissioning Fpedpfx Ajf Ak N Rsp Den Key features • High dynamics and precision in automated 2D & 3D cutting of sheets, tubes, and profiles • Sheet metal processing up to a material thickness of 200 mm • Extensive cutting data library for ideal user-friendliness • Designed for the highest demands under the most challenging conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2,000-7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeatability: DIN-EN 28206 Height of work table: 740-760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Condition: reconditioned (used), Yaskawa MOTOMAN HP20 DX100 KOPPENDORFER Roboterservice has specialized in MOTOMAN robots for 25 years! Robots are tested and freshly serviced by us. There is the possibility of commissioning and programming We have various MOTOMAN robots and spare parts in stock: HP20 DX100 MH6 DX100 HP20 NX100 ES165 NX100 ES200 NX100 ES200 RD DX100 SP80 NX100 UP6 XRC UP50 XRC EA1400 NX100 EA1900 NX100 RM500 RM250 Fsdsr D Nmvepfx Ap Depn etc.

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg Fjdpfx Apoh Ek Dao Depn - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Year of construction: 2020, condition: as good as new (ex-display), 1x Drive unit with chassis 1x Follow-up unit with chassis and height adjustment - Centric roller support adjustment with hand crank - Manual height adjustment, locking with locking pin Fjdpfxefxgrde Ap Djpn - Adjustable height difference: 0-350 mm - Load capacity: 2,500 kg / unit - Component diameter: 200mm – 2,000mm - Running rollers: PUR wheels - Dimensions Length/Width: approx. 1,900mm x 460mm - Chassis track width: 1435mm - Rotation speed: 0 - 2,000 mm/min - Operation: Handheld remote control and foot switch

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. Fsdpeu N A Uujfx Ap Depn *

Condition: excellent (used), 150 m (approx. 492 ft) of Jungheinrich Type MPB pallet racking Used, very good condition, see pictures Height: 3.9 m Depth: 110 cm, blue Field load: 8.4 tons Beam length: 2.7 m, yellow Beams with load capacity/bay: 2400 kg Negotiable price: €9,780.00 net ex-warehouse The offer includes: + 52 units of frames, pre-assembled, depth 110 cm, height 3.9 m + 204 units of beams, length 2.8 m, 2400 kg load capacity/bay + 408 units of locking devices + 208 units of concrete anchors Load capacity signs, documents, etc. are included. Further accessories can be found in the accessories catalog. The goods are in stock. Transport and installation are available upon request. Inspection is possible at any time by appointment. Further information upon request. We constantly have over 5000 m (approx. 16,404 ft) of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT ex-warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 meters of racking are immediately available • 20,000 m² of storage platforms & steel structures are immediately available • 30–50 semi-trailer truckloads of goods are processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Fsdpfx Apsp Dunfs Dspn Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF ACTIVITY: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of goods, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of the client. Our full service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete handover. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), Price plus VAT. The product is also available in other quantities and configurations. This package includes: 14 x uprights at 5,000 mm x 1,100 m (blue) 78 x crossbeams at 2,700 mm (yellow) 156 x locking pins This results in a racking row with 13 bays, each with 3 levels + a base level = a total of 156 pallet spaces (1,000 kg/pallet). Approximately 70 uprights and 1,000 crossbeams are available for this system. Simply contact us. Manufacturer: Jungheinrich Fodpfeibwruox Ap Dspn Type: MPB Condition: used, good condition Height: 5,000 mm Length: approx. 36.50 running meters Racking depth: 1,100 mm Bracing: bolted Crossbeam length: 2,700 mm Bay load: 2,400 kg Row load: 12,000 kg Pallet spaces: 156 Accessories such as: Floor anchoring Connectors Load warning signs Impact protection Guardrails Grating Back panel grating Deep stringers Barrier railings and much more... Just ask us!