Used injection molding machines with a clamping force over 10,000 kN for sale (43)

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system Pedpfx Asyugaljbpera - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Predpsyrrwksfx Abpoa Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m

Condition: ready for operation (used), Year of construction: 2002, clamping force: 40,000 kN, screw diameter: 135 mm, injection weight: 7,837 g, controller manufacturer: KRAUSS MAFFEI, Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 4000-24500 MC features a clamping force of 40,000 kN and an injection volume of 10,735 cm³. The machine is equipped with a screw diameter of 135 mm and a maximum opening width of 4,200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 4000-24500 MC machine we have for sale. Contact us for further details. KraussMaffei 4000-24500 MC Podpfxezk E The Abpera • Clamping Force: 40,000 kN • Injection Volume: 10,735 cm³ • Shot Weight (PS): 7,837 g • Injection Pressure: 2,276 bar • Screw Diameter: 135 mm • Screw L/D Ratio: 23 • Nozzle Radius: 25 mm • Nozzle Shut-Off: Hydraulic • Nozzle Immersion Depth: 40 mm • Platen Size (H × V): 3,315 × 2,920 mm • Daylight Opening (H × V): 2,240 × 1,800 mm • Minimum Opening Stroke: 2,200 mm • Mold Installation Height: 1,100–2,000 mm • Maximum Opening Width: 4,200 mm • Centering Ring (Fixed Platen): 315 mm • Centering Ring (Moving Platen): 315 mm • Quick Mold Clamping System: QMC 101.450 • Hot Runner Control Zones: 48 • Pneumatic Cascade Control Circuits: 10 • Hydraulic Cascade Control Circuits: 12 • Core Pull Circuits (Fixed Platen): 3 • Core Pull Circuits (Moving Platen): 4 • Cooling Circuits (Fixed Platen): 18 • Cooling Circuits (Moving Platen): 18 • Temperature Control Units: 36 • Supply Voltage: 400 V • Power Supply: 3-Phase • Frequency: 50 Hz • Motor Current: 622 A • Heater Current: 583 A • Motor Fuse: 630 A • Heater Fuse: 630 A

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Pedpfxow U Sz Io Abpera Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: good (used), Year of construction: 2013, clamping force: 16,000 kN, Equipment: documentation/manual, Clamping force: 1600 t Screw diameter: 135 mm Distance between tie bars V: 1420 mm Psdeyh I Emepfx Abpjra Distance between tie bars H: 1870 mm Shot volume: 9662 cm3 Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2007, Technical Specifications General Information 1. Manufacturer: ENGEL 2. Model: DUO 7050 / 1000 3. Control Unit: CC200 4. Year of Manufacture: 2007 5. Operating Hours: 100,145 h Clamping Unit 1. Clamping Force: 10,000 kN (1,000 tons) 2. Tie Bar Distance (H × V): 1,400 × 1,150 mm 3. Platen Size (H × V): 1,850 × 1,810 mm 4. Mould Height (Min./Max.): 578 – 1,678 mm 5. Opening Stroke: 2,100 mm 6. Daylight (EBH): 1,000 mm 7. Centering (Fixed / Moving Platen): Ø250 mm Clamping Unit Equipment 1. Core Pulls: 2. Fixed Platen: 3 3. Moving Platen: 3 Podpfsy Ukfmex Abpjra 4. Air Valves: 5. Fixed Platen: 1 6. Moving Platen: 1 7. Magnetic Mould Clamping System: Yes Maximum Mould Weight 1. Maximum Total Mould Weight: 21,000 kg 2. Maximum Mould Weight on Moving Platen: 14,000 kg Injection Unit 1. Screw Diameter: 105 mm 2. Shot Volume: 4,160 cm³ 3. Maximum Specific Injection Pressure: 2,090 bar 4. Plasticizing Capacity (PS): 112 g/s 5. Maximum Screw Speed: 150 rpm 6. Screw Drive: Electric 7. Screw Surface: Armoured and nitrided 8. Barrel: Bimetallic M3 Nozzle 1. Nozzle Orifice Diameter: 8.0 mm 2. Nozzle Radius: R35 mm 3. Nozzle Immersion Depth: 50 mm 4. Maximum Outside Nozzle Diameter: 60 mm KUKA ROBOT 6 axes

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Distance between clamping plates max.: 4000 mm Tool installation height min./max.: 1000 - 1700 mm Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Distance between tie bars: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Injection side Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Core pulls AWS/DS: 1/1 Psdpfezgv Uuex Abpjra Needle gate pneumatic: 1 The machine is supplied with a Kuka robot and can be inspected during production.

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Psdpex Up Rnjfx Abpera Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: ready for operation (used), Year of construction: 1997, clamping force: 31,500 kN, screw diameter: 155 mm, injection weight: 9,642 g, total height: 4,090 mm, overall weight: 1,90,000 kg, product length (max.): 14,760 mm, This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us. • Mounting plate (H x V): 3,230 x 2,780 • Clear opening (H x V): 2,250 x 1,800 • Opening stroke: 2,100 min. • Opening width: 4,100 mm • Stroke volume: 13,205 cm³ • Injection pressure: 1,636 bar • Screw L/D: 23 • Nozzle radius: 25 mm • Immersion depth: 50 mm • Three core pulleys on the fixed side • four core pulleys on the moving side Prodpfsx Sz Erox Abpsa • twelve pneumatic cascades.

Condition: new, Year of construction: 2023, operating hours: 2 h, functionality: fully functional, clamping force: 28,000 kN, screw diameter: 150 mm, displacement volume: 12,017 cm³, injection pressure: 1,750 bar, Clamping force 28000 kN Size of mould platens (h x v) 3005 x 2575 mm Distance between tie bars (h x v) 2185 x 1755 mm Mould opening stroke 3300 / 2100 mm Mould height min/max 800/2000 mm Max. daylight 4100 mm Hydraulic ejector - stroke - mm Ejector force - kN Injection unit: Screw diameter 150 mm Injection pressure 1750 bar Stroke volume 12017 ccm Shot weight (PS) 10935 gr. Screw speed 94 1/min Plasticising rate max. 1866 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 75+55+75+18,5+7,5 kW Installed heating capacity 133 kW Oil Reservoir capacity 2520 ltr. Dimensions and weights: Dimensions of the machine ca. 15,75 x 7,39 x 4,50 m Total machine weight 156000 kg Accessories: - Anti vibration pads - ABB Robot, 3900 mm range, 90 KG payload - Stäubli magnetic platen - Conveyor 6000 x 1000 mm - Motan Mixing station Additional Options: - 20 x Air valves - 4 x hydr. core pulls - 4 x pneumatic core pulls - Robot interface according to Euromap 67 Predpfx Abozinqyepsa - 28 x hydraulic sequential valves - 96 x hot runner controller

Condition: reconditioned (used), Year of construction: 2015, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away! Predpfx Aenh Rnusbpsa

Condition: ready for operation (used), Year of construction: 1997, operating hours: 1,11,569 h, clamping force: 10,000 kN, This Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. The system offers an optional REMAK RE-CNC 6-axis robot with a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details. • Injection unit • Screw speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s Prsdpfxsywlvrs Abpoa • 75% → 69 mm/s • 100% → 92 mm/s • Injection measurement stroke: 200 mm forward movement actually used to inject the shot • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Closing pressure drop: approx. 4–6 bar/min • Proportional valve pressure ranges: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Cylinder heater power examples: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Operating voltages recorded: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. −1 K to +2 K • Condition / maintenance relevant data • Machine alignment tolerance:

Condition: new, Year of construction: 2025, Clamping force: 1600 t Screw diameter: 70 mm Shot weight: 1490 g Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Prsdpfx Aboy Umpuepea Shot volume: 1232 cm3 Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2003, operating hours: 67,092 h, BATTENFELD HM 10000-9200 Manufacturer: BATTENFELD Model: HM 10000-9200 Control system: UNILOG B4 Year of manufacture: 2003 Operating hours: 67,092 h Technical data – Clamping unit Clamping force: 10,000 kN Tie bar spacing (h x v): 1120 x 1400 mm Platen size (h x v): 1960 x 1690 mm Minimum mold height: 550 mm Maximum mold height: 1,020 mm Psdpfxjx Up Rhs Abpora Maximum daylight: 2,120 mm Opening stroke: 1,100 mm Ejector stroke: 300 mm Ejector force: 118 kN Movable platen centering diameter: 250 mm Fixed platen centering diameter: 315 mm Technical data – Injection unit Screw diameter: 120 mm Shot volume: 5,655 cm³ Injection pressure: 1,632 bar Screw length: 22 L/D Screw stroke: 500 mm Screw speed: 130 min⁻¹ Screw torque: 11,370 Nm Plasticizing rate: 144 g/s PS Free discharge plasticizing rate: 1,144 g/s PS Number of heating zones: 8 Nozzle stroke: 700 mm Dimensions & Weight Machine dimensions (L x W x H): 11.6 m x 2.9 m x 2.5 m Total weight: 76,500 kg Equipment Display language: German CompactFlash drive 4x hydraulic core pulls Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler 16x mold heating circuits

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,250 h, functionality: fully functional, machine/vehicle number: 51760, clamping force: 11,000 kN, screw diameter: 90 mm, injection pressure: 1,910 bar, tool height: 1,270 mm, TECHNICAL DETAILS Clamping force: 11,000 kN Platen size (H x V): 2,340 x 2,040 mm Tie bar spacing (H x V): 1,575 x 1,320 mm Min. tool height: 592 mm Max. tool height: 1,270 mm Max. opening stroke: 3,016 mm Injection unit Screw diameter: 90 mm Shot volume: 2,480 cm³ Shot weight (PS): 2,256.8 g Injection pressure: 1,910 bar MACHINE DETAILS Prodsxuqbrspfx Abpja Net weight (including control cabinet): 62 + 11 t Operating hours: 70,250 h EQUIPMENT ENGEL ERC 84-1E robot

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, opening stroke: 2,900 mm, tool height: 1,400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mold height: 700 mm Max. mold height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (incl. control cabinet): 74,000 + 21,000 kg Electrical & hydraulic equipment Rated power of pump motor: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture: 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel 2015: New IBED 2015: New wiring panel 2017: New motor and 2nd pump Pedpfx Aboxup T Hepjra 2017: New injection side cylinder piston BS with seals 2017: Replacement of oil cooler circulation pump 2017: Replacement of teach box (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Replacement of hydraulic oil

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 11,000 kN, screw diameter: 120 mm, injection pressure: 1,758 bar, injection weight: 6,175 g, opening stroke: 2,000 mm, KraussMaffei KM 1100–12000 MX including WITTMANN robot! TECHNICAL DETAILS Clamping force: 11,000 kN Opening force: 770 kN Platen size (H × V): 2,210 × 1,910 mm Tie bar distance (H × V): 1,550 × 1,250 mm Opening stroke: 2,000 mm Tool height (min. - max.): 600 - 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (Standard / Option): 103 / 145 rpm Injection rate (Standard): 1,118 cm³/s Injection rate (Accumulator): 1,696 cm³/s MACHINE DETAILS Electro-hydraulic system Rated power of pump motors: 132 kW Installed heating capacity: 82 kW Number of heating circuits on the cylinder: 7 Cycle time (Euromap): 802 1/h Oil tank volume: 2,440 l Dimensions & Weight Prjdpfxjy T Hd No Abpoa Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Net weight with control cabinet: 73 t EQUIPMENT Robot: Wittmann MC5 control system with color monitor, integrated control panel and three USB ports

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8673 0023, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, plate width: 1,880 mm, plate height: 2,150 mm, Regularly maintained machine - see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting plate dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between columns (H x V): 1,500 mm x 1,250 mm Prodpfoy T Hy Djx Abpsa Min./Max. mold height: 700 mm - 1,400 mm Maximum opening distance: 2,900 mm Control: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Rated power of pump motor: 165 kW Heating power: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 t Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and tube 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 new 2017: Injection cylinder BS piston rod new with seals 2017: Circulation pump oil cooler replaced 2017: Teachbox replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil change 2019: New injection valve 2019: Dosing inverter overhauled by Fa. Eichler 2021: Motor P1 new 2022: New RSP EQUIPMENT - Wittmann W 753 Robot - 2008 - Cage and conveyor belt