Used Grinding machines & cutting machinery for sale (31)

Condition: good (used), Functionality: unexamined, Ladies and Gentlemen, We are selling the BFS1350-CE gasoline floor saw from Wacker Neuson described and photographed here. Further information: Dimensions L x W x H: 890 x 575 x 1010 mm Weight: 94 kg Disc diameter max.: 500 mm Engine type: Petrol engine Rated power: 8.7 kW Rated speed: 3600 1/min Displacement: 389 cm³ Further information and photos of the machine are available on request. Disclaimer The machines offered are sold "as is" and "without warranty". Any express or implied warranties, including, but not limited to, warranties of merchantability or fitness for a particular purpose, are hereby expressly disclaimed. Seller assumes no responsibility for the operability, reliability or accuracy of the machine. It is the buyer's responsibility to thoroughly inspect the machine prior to purchase and ensure that it meets his requirements. Any descriptions or specifications of the machine are for information purposes only and may contain inaccuracies or errors. The seller shall not be liable for any such inaccuracies or errors and assumes no obligation to update or correct such information. Buyer agrees that Seller shall not be liable for any damages or losses arising directly or indirectly from the purchase, use or inability to use the machine, including, but not limited to, lost profits, business interruption or consequential damages. Any repairs or modifications to the machine after purchase are the sole responsibility of the buyer. The seller is not liable for damage caused by improper repairs or modifications. By purchasing the machine, the buyer expressly agrees to the terms of this disclaimer and waives any claims against the seller in connection with the purchase or use of the machine. Dpsgvp

Year of construction: 1993, Condition: used, Cutting depth 220 mm Ehearnf weight of the machine ca. 375 kg 4 new blades

Power: 60 kW (81.58 HP), fuel type: diesel, overall weight: 1,300 kg, number of seats: 1, Year of construction: 2004, Condition: used, Functionality: fully functional, machine/vehicle number: 04 6010 107, Brand Engine: Perkins 804C-33T Bryp7W9Yl0C Machine is in good working condition

Year of construction: 2024, Condition: new, Guillotine FOX55 - Guillotine FOX55 - for cutting bars, reinforcing steel, wire, flat bars, reinforcement - Manufacturer: MACHINEHURT - Product code: FOX55 - Inner mesh panties ✅dimensions: 1270 x 650 x 990 mm ✅weight: 690 kg ✅engine: 4 kW ✅number of cuts per minute: 41 ✅max diameter of round bars Ø55 ✅max diameter of ribbed bars Ø46 ✅max flat bar height 80 mm ✅control with foot button and lever on housing ✅The supplied device is supplemented with consumables and is ready for immediate operation ✅The device is made of high quality materials which guarantees failure-free operation for many years ✅engine: 4 kW with overload protection - in the price you get overload protection of the engine, e.g. due to lack of phase - Avoid costly machine repair and downtime ✅ we used main switch and buttons START and STOP in a place that provides safe and comfortable work with the machine and necessary covers ✅ the machine is equipped with all necessary protection and shields, which makes the work safe and meeting the requirements. ✅ weight: 690 kg (solid machine body design) ✅ dimensions: 1270 x 650 x 990 mm (machine additionally equipped with two transport handles for hooks) - Thanks to this you can use a crane or crane and transport the guillotine in an easy, safe and fast way ✅ number of cuts per minute: 41 - So cutting several bars takes just over second. Incomparably much faster and cheaper than a circular cutter Diwhy00E durable and durable knives (before replacing with a new set, you can use 4 knife edges first)

Year of construction: 2008, operating hours: 443 h, Condition: excellent (used), Functionality: fully functional, Floor saw 4 cilinder air-cooled With water and sludge extraction system and extraction saw blade guard 800mm With seat bracket Saw blade min dia 350 and max dia 600mm T2J8Shn Max. cutting depth Cutting depth 220cm

Overall weight: 640 kg, Year of construction: 2021, operating hours: 2 h, Condition: like new (used), Functionality: fully functional, Floor sanding machine Orbiter 800 RC-DSP - CONTEC's most powerful grinding machine with orbital drive for stripping, cleaning or surface preparation surface preparation, sanding and polishing Technical specifications Working width: 800 mm Motor: 400 Volt / 32 A / 15 kW Tool speed: 230 - 825 rpm Discs: 3 x 280 mm Weight: 640 kg Water tank: 20 liters Uuwc7Hx9Pp Special features: Integrated feed control with radio remote control On-board computer with grinding recommendation and diamond wear indicator, adjustable grinding pressure, on-board battery board battery" and joystick control for easy transportation. transportation.

Year of construction: 1983, Condition: used, machine/vehicle number: 1727, HM blade Ø: 300 mm Cumi3Il here cutting depth max.: 100 mm Cutting blade speed: approx. 4000 rpm Drive motor: 380 V, 2.2 kW Space requirement: 350 x 600 x 400 mm Weight: approx. 30 kg with trolley underframe, for moving on a track rail

Condition: good (used), Steel wire sheet cutter Br3Jurn97R Cutting length 3900 mm Dimensions Length: 5100 mm Width: 1700 mm Height:3100 mm

Condition: good (used), I sell Norton Clipper JUMBO 900 table saw Norton Clipper JUMBO 900 table saw in very good condition. Cyow22Ydks

Year of construction: 2024, Condition: new, FOX35 guillotine - Guillotine FOX35 - for cutting bars, reinforcing steel, wire, flat bars, reinforcement - Manufacturer: MACHINEHURT - Product code: FOX35 - Inner mesh panties ✅dimensions: 940 x 580 x 800 mm ✅weight: 290 kg ✅engine: 2.2 kW ✅number of cuts per minute: 48 ✅max diameter of round bars Ø35 ✅max diameter of ribbed bars Ø29 ✅control with foot button and lever on housing ✅The supplied device is supplemented with consumables and is ready for immediate operation ✅The device is made of high quality materials which guarantees failure-free operation for many years ✅engine: 2.2 kW with overload protection - in the price you get overload protection of the engine, e.g. due to lack of phase - Avoid costly machine repair and downtime ✅ we used main switch and buttons START and STOP in a place that provides safe and comfortable work with the machine and necessary covers Doe0C9 ✅ the machine is equipped with all necessary protection and shields, which makes the work safe and meeting the requirements. ✅ weight: 290 kg (solid machine body design) ✅ dimensions: 940 x 580 x 800 mm (machine additionally equipped with two transport handles for hooks) - Thanks to this you can use a crane or crane and transport the guillotine in an easy, safe and fast way. ✅ number of cuts per minute: 48 - So cutting several bars takes just over second. Incomparably much faster and cheaper than a circular cutter - durable and durable knives (before replacing with a new set, you can use 4 knife edges first)

Condition: good (used), Self-made grinding block / diamond wheel Bnodkaelnk Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Overall weight: 640 kg, Year of construction: 2021, operating hours: 15 h, Condition: like new (used), Functionality: fully functional, Floor sanding machine Orbiter 800 RC-DSP - CONTEC's most powerful grinding machine with orbital drive for stripping, cleaning or surface preparation surface preparation, sanding and polishing Technical specifications Working width: 800 mm Uuv9Gbbvoh Motor: 400 Volt / 32 A / 15 kW Tool speed: 230 - 825 rpm Discs: 3 x 280 mm Weight: 640 kg Water tank: 20 liters Special features: Integrated feed control with radio remote control On-board computer with grinding recommendation and diamond wear indicator, adjustable grinding pressure, on-board battery board battery" and joystick control for easy transportation. transportation.

Condition: used, Floor cutters, asphalt cutters, concrete cutters -Tank: defective -Saw blade: Ø 350 mm -Cutting depth: 120 mm -Motor: Honda G400 7.4 kW 10 HP Fdapv0Rfu -Dimensions: 1250/500/H800 mm

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 525.22.06.E.015, Machine type: Floor grinding machine Year of manufacture: 2023 Condition: Demonstration machine, slight signs of wear Working width: 525 mm Chr90Qoomu Output power: 7.5 kW, 400 V; 50 Hz Speed: 1020 / 590 / 1100 mm Weight: 317 kg

Year of construction: 2024, Condition: new, REINforcing bar guillotine wire cutter 4-42mm for steel PRODUCER ✅ FOX42 V2 guillotine - for cutting bars, reinforcing steel, wire, flat bars, rebar, stirrups ✅ Manufacturer: MACHINOHURT P2Axvffu ✅ MODEL: FOX42 V2 ✅ for FREE you get installed motor overload protection ✅ the motor will not be damaged by missing a phase or by overloading the machine The FOX42 V2 bar guillotine is a specialised tool designed for precision cutting of reinforcing bars and steel wires with diameters from 4 to 42 mm. It is an indispensable tool in the construction and metalworking industry, particularly in the manufacture of steel structures. Specification: ✅ weight: 500 kg ✅ dimensions: 1100 x 500 x 900 mm ✅ motor: 3 kW with overload protection ✅ number of cuts per minute: up to 48 ✅ max diameter of round bars: Ø42 ✅ max diameter of ribbed bars: Ø36 ✅ max height of flat bar: 60 mm ✅ unit supplied complete with consumables and ready for immediate operation ✅ control by foot pedal or lever on housing ✅ unit made of high quality materials to ensure trouble-free operation for many years ⭐Features of the FOX42 V2 guillotine: - Cutting range: Can cut bars and wires with diameters from 4 mm to 42 mm. - Construction: Robust steel housing ensures durability and resistance to heavy use. - Cutting mechanism: Powerful hydraulic or electric mechanism for fast and easy cutting. - Efficiency: Efficient cutting increases the pace of work in workshops and on construction sites. - Precision: Provides clean and accurate cuts, minimising material damage. - Ease of use: The intuitive control panel makes the machine easy to use. - Safety: Integrated safety systems protect the operator during operation. - Cutting depth adjustment: Allows settings to be adjusted to suit different material thicknesses. - Mobility: Often equipped with wheels or handles for easy mobility. - Application: Ideal for construction, steel fabrication and crafts.

Condition: used, Floor cutters, asphalt cutters, concrete cutters -Saw blade: Ø 360 mm -Cutting depth: 120 mm Slh8Xt7P -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 650.22.06.E.127, Machine type: Floor grinding machine Year of manufacture: 2023 Condition: Demonstration machine, slight signs of wear Working width: 650 mm Output power: 11 kW, 400 V; 50 Hz Speed: 100 - 700 rpm Dpmbhl Weight: 390 kg

Condition: used, Floor cutters, asphalt cutters, concrete cutters -without: saw blade and cable -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm -Weight: 100 kg Ptj3Bm

Condition: used, Plate cutter, composite stone cutter, stone pincers, plaster stone pincers -for effortlessly cutting slabs and composite stones to length through the translation of the eccentric lever -great stability with low weight -exact guidance of the cutting knife -pendulum suspended upper knife for cutting materials that have a conical cross-section (curbs) -Max. for 6 cam stones Qlq9Rw3Nw -Own weight: 10 kg

Year of construction: 1989, Condition: used, Floor cutters, asphalt cutters, concrete cutters -Saw blade: Ø 350 mm -Cutting depth: 120 mm -Motor: Honda GX340 8.1 kW 11 HP M7Xgd -Number: 3x available -Price: per piece -Dimensions: 1250/500/H800 mm

Year of construction: 1987, Condition: used, Floor saw Lh9Fz -Motor: Honda petrol engine -Power: 8.1 kW/11 PS -Saw blade diameter: 400 mm -Number: 3 pieces available -Price: per piece

Condition: used, Floor cutter, asphalt cutter, concrete cutter -Manufacturer: Cedima, floor cutter type CF 16.1D -Saw blade: Ø max. 480 mm B9Vti7Agr3 -Engine: Hatz E 780U 7 kW -Dimensions: 1150/680/H920 mm -Weight: 250 kg

Year of construction: 1995, Condition: used, Floor saw, asphalt cutter, concrete cutter, block saw, stone saw, table saw -Manufacturer: Norton, table saw Jumbo 900 Zozoc -Saw blade: Ø 900 mm -Motor: 7.5kw -Cutting area: 720 x 370 mm -Coolant device -Dimensions: 1700/1030/H1500 mm -Weight: 354 kg

Year of construction: 1980, Condition: used, Floor saw, diesel floor saw, asphalt cutter -Saw blades: 2 Qktgfvo7X -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E start -stepless feed

Condition: used, Plate cutter, composite stone cutter, stone pincers, plaster stone pincers -for effortlessly cutting slabs and composite stones to length through the translation of the eccentric lever -great stability with low weight -exact guidance of the cutting knife -pendulum suspended upper knife for cutting materials that have a conical cross-section (curbs) -Working length: 500 mm Qlaeegvne -Own weight: 100 kg