Oberhaizinger GmbH

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: S36024, negative pressure: 4,200 Pa, volume flow: 11,280 m³/h, power: 30 kW (40.79 HP), Hello, we are selling a Combifab radial fan as it is no longer needed. Codpsx Afp Tefx Addshf Please refer to the pictures for all details. Thank you!

Condition: used, Dust Cyclone, Dust Separator Overall dimensions: 2350 x 2100 x 5040 mm Cyclone diameter: 2100 mm Inlet side: 870 x 360 mm Outlet diameter: 635 mm Chjdoxt Un Hjpfx Addjf

Condition: used, Dust Cyclone, Dust Separator, Used machine Chsdsxt Tw Hepfx Addjf Overall dimensions: 1200 x 1150 x 3270 mm Inlet side: 280 mm Outlet side: 250 mm Cylinder shell height: 800 mm

Condition: used, Table dimensions 1250 x 750 mm Csdpfxexcp Nws Addehf

Condition: used, functionality: fully functional, - Manufacturer: Dřevo Trust a.s., Loučná nad Desnou - Height: approx. 18 m - Clearance height: 4.8 m - Volume: approx. 140 m³ - Shell height: 9 m Csdpfx Adexa Eu Rsdshf - Shell diameter: 4.5 m - Discharge motor power: 15 kW - The silo was subsequently equipped with a particulate separator (cyclone)

Year of construction: 2025, condition: new, Dimensions (L/W/H) 800x847x790 mm Weight 250 kg Cedpfevz E Dlsx Addjhf Total power requirement 7,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 910x1200x850 mm Weight 400 kg Chsdpfevz Exvox Addjf Total power requirement 18,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 880x1037x820 mm Weight 188 kg Chjdpfx Ajvz Ew Eeddsf Total power requirement 11 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 690x771x790 mm Codpfx Aovz Enwjddjhf Weight 130 kg Total power requirement 5,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1510x1250x1400 mm Chjdpfx Ajvz Enqeddsf Weight 600 kg Total power requirement 30 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 740x630x1028 mm Weight 60 kg Chedpfx Aovz Endoddjf Total power requirement 3 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 890x1081x830 mm Cedpfxovz Emae Addjhf Weight 268 kg Total power requirement 15 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1410x1130x1295 mm Chjdpfx Adsvz Ei Isdof Weight 320 kg Total power requirement 22 kw

Condition: used, heavy fire bulkhead with counterweight used manufactured by Spänex width 1300 mm height 1900 mm material transport 2 x D 350 mm located in 97447 Gerolzhofen Chjdpjvwgdlsfx Addof sale in current condition as seen - free on truck -

Condition: used, usedmake Troxlength 700 mmwidth 700 mmheight 500 mmreturn airlimit switch for monitoringstorage location 97447 Gerolzhofendelivery in as-is condition as viewed- free on truck - Cedpovwgcnjfx Addshf

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Connection piece: 350 mm, Chedpeu R Tb Uefx Addof Spigots: 5 pieces, nozzle diameter: 2x160,2x100,1x120 mm

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Connection piece: 300 mm, Csdpfxeu R S Uys Addjhf Nozzle: 5 pieces, nozzle diameter: 160 mm

Condition: new, Year of construction: 2024, functionality: fully functional, Extraction table without rear panel/side panels Technical data: Work surface: 2,000 x 1,000 mm Working height: 850-950 mm (manual adjustment) Width: 2250 mm (including energy bar) Power strip with tool tray: Cedpfouzf Ihjx Addshf 2x 230 V socket with hinged cover, 2x compressed air couplings, mains cable and main switch Extraction nozzle Ø 160 mm, with shelf

Condition: used, Square approx.: 510 x 510 mm Tube inside: 230 mm Pipe inside: 230 mm Chsdslf Iz Aopfx Addjf

Condition: used, with 5 connections. Cedpfx Adslf Izmsdjhf Main tube: 310 mm main pipe: 310 mm Connections: 145 mm connections: 145 mm

Condition: new, galvanized sheet metal dust collection trays fold down side and rear walls - optional rear wall with suction function Working area 2500 x 800 mm Working height 930 mm incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow 5400 m3/h Number of filter cartridges # 4 DM filter cartridges 320 mm Length filter cartridge 600 mm Cjdpfx Aoh Ucqtjddshf Total filter area 34.8 m2 Noise level 78 dBA Compressed air 5-7 bar Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2001, condition: excellent (used), Has a rake Capacity 1755 m3 / h 1 compartment Dimensions: Height 260cm width 85cm Length 110 cm Chsdpfxjhqb Sws Addef Inlet diameter 160 mm

Year of construction: 2013, condition: like new (used), we sale 3 fire dampers for the isolation of duct penetrations between fire compartments: 1. TROX Technik FKR-01/02-90K, 510x600, year of manufacture 2013. 2. TROX Technik FKR-01/02-90K, 630x600/Z42, year of manufacture 2013. 3. SCHMIDLIN K90, 310x700, year of manufacture 2003 sale in current condition as seen. All are dismantled properly FCA Oradea, Romania Csdpfx Adsg Rpibjdshf

Year of construction: 2025, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. Chjdjfyadbopfx Addef The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: Chodpfxjftdv Uo Addof silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.