ecki b. GmbH & Co. KG

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 18WJ3-25, Weijin WJ-C400 LDPE Zipper Bag Sealing & Cutting Machine – NEW / UNUSED Industrial automatic zipper-bag sealing and cutting machine manufactured by Weijin Machinery Industry Co., Ltd., Taiwan, equipped with a two-servo control system for high-speed LDPE/LLDPE zipper-bag production. Technical Specifications Model: WJ-C400 Material: LDPE zipper bag Maximum cutting width: 300 mm Maximum cutting length: 320 mm Film thickness: 0.04–0.20 mm Bag-making speed: 30–130 pcs/min Maximum unwind reel weight: 50 kg Power supply: 380 V, 3-phase Main motor: 1.5 kW AC Yaskawa J1000 1.5 kW main motor inverter Micro-computerized control interface and electrical cabinet Unwind Unit Steel-shaft unwind 0.37 kW AC infeed motor 0.37 kW motor drive Dancer tension-control mechanism Sealing & Cutting Unit High-toughness heat sealing and cutting knife Yaskawa 1.3 kW servo motor Yaskawa 1.5 kW servo drive S2000 printing-pattern photo sensor Zipper Bag Collecting Unit Hfsdpfx Afoz Aay Tjtsl 0.1 kW AC outfeed motor Outfeed motor reducer Standard Spare Parts Drive belts and heating pads included as specified in the original equipment documentation. Condition: NEW / UNUSED

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 4743, New S-DAI Industrial Zipper Sealing with In-Line Folding Machine Industrial film-processing system manufactured by S-DAI Industrial Co., Ltd., Taiwan, designed to combine film handling/folding with zipper feeding, positioning and sealing in an integrated machine. The equipment is new/unused. Original machine drawings, manuals and supporting technical documentation are available. Folding Section 2 HP AC servo-driven material unwind Dancing roller Unwind-diameter monitoring Laser sensor Controlled web handling and folding system Zipper Sealing Section V-board moving device EPC (Edge Position Controller) Air shaft PLC control box Motor-driven zipper unwind Dancing rollers for zipper and material Zipper sealing device with cooling 2 thermal/temperature controllers Infeed rubber roller with 1/2 HP motor Nip roller with 1/2 HP motor Electronic controller Hfsdpfx Aoz Aak Ejftjl Material-empty and zipper-empty warning signals Machine start/stop signals Zipper tape unwind gear ratio: 10:1 Additional Unwind / Tension-Control Equipment Extra unwind air shaft Low-tension unwind system 1/2 HP infeed motor and inverter Infeed roller SICK ultrasonic diameter monitoring Dancing roller 2 guider-roller sets Distance-checking laser Associated program design Condition: NEW / UNUSED Documentation: Original drawings, manuals and supporting technical documents available.

Condition: good (used), Year of construction: 2001, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 132, spindle speed (min.): 2,700 rpm, table height: 1,800 mm, table diameter: 800 mm, table width: 800 mm, table length: 200 mm, Profile saw for extrusion. Synchronized with profile speed and cuts… repeated cuts! Hjdpfxszw U Tqs Aftjfl Ejection… piece counter.

Year of construction: 2001, condition: good (used), Voltage: 380 V Hjdpfx Afezunx Ujtjfl Power: 3 kW Pipe diameter (min.): 63 mm Pipe diameter (max.): 400 mm Dimensions (L x W x H): 4400 x 1600 x 2600 mm Weight: 1580 kg Includes universal clamps.

Year of construction: 2003, condition: good (used), This band saw, from our renowned brand SICA S.p.a., is currently stored at Plastima Used Machinery. The saw was manufactured in 2003 and is in used, but good condition. Brand: SICA S.p.A. Model: TRS/U 110-800 Hjdpfxezunwdj Aftefl Year of construction: 2003 Power: 5.5 kW Maximum pipe outer diameter: 110 to 800 mm

Year of construction: 2001, operating hours: 45,267 h, condition: used, functionality: fully functional, machine/vehicle number: FLOW 7XDE-60, We offer a used PTV AWJ2030B-1Z waterjet cutting machine in fully working condition, used on a daily basis. Manufacturer: PTV Model: AWJ2030B-1Z Year of manufacture: 2001 Pump: FLOW 7XDE-60: Hfjdpfx Aezrztysftjl - Max. operating pressure (MPa): 415 - Power supply: 37 kW - Water consumption (l/min): 3.68 - Two-stage filtering unit, automatic safety valve, stepped pressure increase and water cooling adjustment; - Current meter reading for operating hours: 45267 Table: - Working dimensions of the table, XYZ axes: 3000x2000x195 mm - External dimensions: 4280x4150x2100 mm - Speed range: 0-12000 mm/min. - Control system: CNC - Basic CAD/CAM programming system: WRYKRYS This set also includes a control panel and a pneumatic abrasive feeding system with accessories.

Year of construction: 1989, condition: used, Used Machine Year of Manufacture: 1989 Features and Technical Specifications: - Diamond polishing and milling machine - For high-gloss milling and polishing of straight plastic edges Hsdpfezpblqex Aftjfl - Suitable for PMMA (acrylic glass) and other thermoplastics - Diamond polishing and milling unit - Precision workpiece guidance - Robust welded steel construction - Power consumption: 1.5 kW - Supply voltage: 220 V - Mains frequency: 50 Hz Availability: available shortly Location: 63934 Röllbach

Year of construction: 1998, operating hours: 1,776 h, condition: used, functionality: fully functional, machine/vehicle number: 37, - Motor 35 kW / Maximum screw speed 72 rpm - 2-part, smooth cylinder - 5 cylinder heating zones - 1 flange heating zone - 2 tool heating zones - KS 40 controller - Measurement of melt pressure and melt temperature - 3-zone screw Hsdpfjzmurrex Aftofl - Tool connection IDE M100x3 - From a single owner, in very good condition, only 1,776 operating hours, used solely in a pilot plant.

Year of construction: 2013, condition: used, functionality: fully functional, Equipment: CE marking, "Dual drying system with compressed air expansion + molecular sieve treatment - Weekly timer - Anti-stress system - Compressed air flow rate: 7 - 20 Nm3/h - Maximum temperature: 180 °C - Dew point: -50 °C - Total power: 1 kW - Power supply: 230 V - 50 Hz - Hopper capacity: 50 dm3 - Compressed air pressure: 6-8 bar - Weight: 23 kg" Hfodpfozlxq Nsx Aftsl

Year of construction: 2025, operating hours: 255 h, condition: like new (used), functionality: fully functional, We are offering for sale a large-format, 5-axis CNC waterjet cutting machine, PTV WJ4080. The machine was manufactured in 2025, has only approximately 255 operating hours, and is in new condition (like new/demonstration machine). Regular service and maintenance have been performed exclusively by authorized technicians from the manufacturer, PTV. The machine is equipped with superior optional features for maximum precision (5-axis cutting head with bevel compensation) and gentle cutting of brittle materials. The machine is connected and ready for a demonstration. Technical specifications: • Manufacturer: PTV s.r.o. (Czech Republic) • Model: WJ4080-1Z-UJ-PJ-5AX (60°) • Year of manufacture: 2025 • Serial number: 70-1457 • Machine condition: Like new (as new, minimally used) • Operating hours: approx. 255 hours • Working dimensions: 4,000 x 8,000 mm x +-180 mm • Enclosure protection class: IP54 • Electrical parameters and connection: • Voltage system: TN-C-S, 3+N+PE-400/230 V AC Hedpfszg Dgxsx Aftjfl • Network frequency: 50 Hz • Infeed fuse: 25 A • Installed power: 5.5 kW • Power factor COS φ: 0.85 • Control circuit voltage: 24 V DC • Maximum short-circuit current of busbars: 10 kA Key features and technologies: • 5-axis cutting head (60°) with Progress Jet function: A system for active bevel elimination, which ensures a perfectly perpendicular cut and maximum dimensional accuracy, even at high speeds. • Gentle Piercing function: Controlled piercing with a smooth increase in cutting pressure. Ideal for brittle materials (glass, tiles, ceramics, stone, composites), where it completely prevents cracking or delamination of the material. • PTV JETS 3.8/60 Classic high-pressure pump: - Equipped with a frequency converter (dampens shocks, saves electrical energy, and extends the life of high-pressure components). - Integrated auxiliary pump for compensating low pressure in the supply water. • ARSA automatic sludge removal: Continuous mechanical cleaning of the tank/collector from used abrasive + integrated vacuum tube for easy manual cleaning. • Abrasive handling system: Pressurized abrasive feed unit PDA 1500. Bonus to the offer: We will provide 4 tons of high-quality abrasive free of charge with the machine, which allows the new owner to immediately start production without additional initial investment. The machine is fully functional, connected, and can be viewed and tested by prior arrangement. If you have any questions, need further information, or are interested in viewing the machine, please do not hesitate to send us a message or contact us by phone. We will get back to you promptly.

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 Hedpszfx A Eefx Aftofl The unit is in good used condition. Inspection is possible by prior appointment. Errors and prior sale excepted.

Year of construction: 2011, condition: used, functionality: fully functional, Blackman & White Genesis 2300 Conveyor (DOM June 2011) Overall Size – 7.6m (including cradle) X 3.1m Belt size - 5m x 2m Hodpfszdkv Isx Aftefl Cutting Window – 4.6m X 1.3m Max Cutting Speed – 1500mm/sec Pneumatic Oscillating Drag Knife with 1 spare tool head (Unsure on working state) Full Vacuum System (Single Zone) Leibinger JET3 Inkjet Marking System (NON WORKING) MasterCut 2100 CL Drive Software Included Alphacam 2012 Processable Materials Composite Pre-Preg Materials (Carbon Fibre , Glass Fibre, Kevlar) Textile Fabrics Low Density Foam

Condition: used, SONOTRONIC ECO 35 Ultrasonic Welding Press. It is typically used for ultrasonic welding of thermoplastic parts. At the top is the pneumatically actuated ultrasonic head with converter, booster, and sonotrode; the workpiece is fixed on the base plate in a suitable fixture. Hedpfxezcvuhj Aftefl Important: Operation usually requires an external 35 kHz ultrasonic generator, a suitable sonotrode, and a workpiece fixture. Only the connection or booster is present at the bottom of the head; the actual workpiece-specific sonotrode is missing. The device is from 1998 and, according to the nameplate, operates at 230 V. Before commissioning, electrical safety, pneumatics, two-hand release/emergency stop, and safety devices should be checked.

Year of construction: 2000, operating hours: 0 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 991666/A, Complete Turbomixing plant composed of: Bandera turbomixer 700L volume of the tank, DC motor 130kw Cooler mixer 2000L , electric control Panel with PLC to control the mixing cycle Available original manual Bandera Hodey Txzmopfx Aftjfl

Year of construction: 2010, condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 Hfjdey R S Twspfx Aftjl -Side channel blower: Elmo Rietschle -Individual components: see photos Quantity: 1 piece available -Dimensions: 530/520/H1120 mm -Weight: 56 kg

Condition: good (used), Year of construction: 1999, Brand: Kuag Model: Kuag RA 250 6E Hodpfx Afey I Am Netsfl Year of manufacture: 1999 Voltage: 3x400 V Serial number: 077099

Condition: good (used), Year of construction: 1999, Brand: Kuag Model: Kuag RA 250 6E Year of manufacture: 1999 Hfsdpfxsy Izbxo Aftel Voltage: 3x400 V Serial number: 076999

Condition: good (used), Transitube mixing system for mixing laser sintering material, including conveying via screw conveyor. Hfjdpfx Ajyzamgoftsl

Condition: good (used), Year of construction: 2014, functionality: fully functional, ELCON Automatic Multiwall Sheet Cutting Machine LANCET 215 For vertical and horizontal cutting of multiwall sheets with a rigid blade! Technical Specifications: Cutting Height: 2,150 mm Cutting Length: 7,300 mm Cutting Depth: 50 mm Required Air Pressure: 6 bar Dimension setting for horizontal cuts: electronically adjustable via touchscreen Dimension setting for vertical cuts: via scale from 0–1,300 mm Feed rate: continuously adjustable from 0 to 60 m/min. Features: Hfjdoyymhujpfx Aftol Solid, enclosed rear wall with felt support (new) Aluminum material support table Right-hand, pneumatically retractable material stop Pressure device for vertical cuts with adjustable pressure Lower pneumatic sheet clamping device per meter of cutting length Pneumatically retractable blade Pneumatically swiveling blade

Year of construction: 2010, condition: ready for operation (used), A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2017. Documentation available. An on-site inspection is possible. Hfedpfxoyviyro Aftsl

Condition: used, Year of construction: 1973, KRUPP FS-74 Cutting Machine Hodpfx Aeytcw Reftjfl - incl. dual brake unit (250kg) - incl. drive system - speed control - winding monitor The system is available twice. (price per unit) Please note that the machine must be dismantled, packed, and collected by the buyer.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SCI-H21113, • Circumferential cutting by knife • From Ø32 up to 125 mm Hfsdpfx Afeyn Rdzetjl • For PVC and PE pipes • Centralized pneumatic clamping • Electric carriage movement • Pneumatic knife clamping • Up to 15 m/min

Year of construction: 1999, condition: ready for operation (used), A Ferrarini & Benelli corona pre-treatment system for surface activation of non-conductive materials in continuous production processes is available. Generator type: C15/4N, output frequency: 15kHz, electrode design: multi-cylinder roller electrodes, max. treatment width: 200mm. An on-site inspection is possible. Hfsdpfsyn N Avsx Aftsl

Year of construction: 2020, condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system Hfodpfx Aoyl Tzweftel -Manufacturer: Wuxi Oulongyu Automation Technology, granule conveyor vacuum suction conveying system -Type: OLY-FS300 -Dosing device: OLY CLY-FT20 -Individual components: see photos -Quantity: 1 device available -Dimensions: 860/800/H2360 mm -Weight: 244 kg

Year of construction: 2020, condition: good (used), Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station, drying container Hfsdpfxeyl Tuqs Aftol -Manufacturer: Helios, Drying container granulate dryer type GDM -Dosing system: GDM650-2 -Tank: 1010/770/H600 mm -Individual components: see photos -Quantity: 1 device available -Dimensions: 1170/800/H2780 mm -Weight: 521 kg