Fhp Ajb Andrzej Dzięcioł

Condition: excellent (used), Year of construction: 1993, Spindle mount SK 30 Table clamping area 640 x 200 mm Longitudinal travel X-axis, automatic 550 mm Transverse travel Y-axis, manual 155 mm Vertical travel Z-axis, manual 350 mm Distance between table and milling spindle 300 mm 8 main spindle speeds 50 - 1500 rpm Feed rates 30 - 340 mm/min Drive power 1.25 / 1.5 hp Dimensions L x W x H approx. 1300 x 1250 x 1800 mm Weight 900 kg Accessories / Special features: • 3-axis digital display ELESTA • Vertical milling head with boring quill, swiveling left-right Dcodpozbikmsfx Abzoh • Horizontal milling attachment • Rotatable clamping table left-right • Coolant system • 2-stage main motor This excellent GUALDONI machine comes from an educational institution and can be inspected and demonstrated under power at any time after prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1993, x-travel 500 mm y-travel 380 mm z-travel 350 mm tool taper ISO 40 spindle turning speed range 63.0 - 4000 U/min feeds 10 - 1000 mm/min quill stroke 50.0 mm table-size 800 x 360 mm table load ca. 250 kg T-slots 14H7 - 5/63 mm Dedpfezbc Dgjx Abzsch rapid traverse X-axis 1.5 m/min rapid traverse Z-axis 1.5 m/min rapid traverse Y-axis 1.0 m/min Control DIGI "VRZ 650" Number of working hours 810 h voltage 380 V control voltage 110 V engine output 8.0 kW weight 1850 kg dimensions of the machine ca. 1880 x 1796 x 1840 mm from a training center very little run (!!) operating hours approx. 810 hours Equipment: - robust conv. electro-motorized universal milling machine - HEIDENHAIN digital display incl. control panel * swiveling, front right * display font 0.005/0.001 mm - Electro-motorized adjustment of all axes (X/Y/Z axis) * rapid traverse in all 3x directions * Manual adjustment via handwheel also possible - Infinitely variable speed adjustment - Vertical milling head with quill adjustment * ISO 40 tool holder * Automatic tool clamping with clamping/pull bar - Robust work table incl. T-slots ... 800 x 390 mm * Number/size of T-slots 5 pieces 14H7 * Distance between T-slots 63.0 mm * Safety housing (own construction) - Coolant device incl. lower chip tray - Counter support = horizontal milling device - Halogen/machine lighting - Central lubrication incl. container - Original operating instructions

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 4238442, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, table width: 300 mm, table length: 700 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, input current: 16 A, The Czechoslovak-made TOS FN 32 is an exceptionally robust and precise universal tool milling machine, primarily designed for tool factories and manufacturers of custom and small-batch parts, for precision milling operations. Dimensions: 1200x1080x1345 mm Weight: 830 kg + other accessories 415 kg Dcedpfey Uv Rusx Abzsh Noise level: 82 dB Electrical consumption: 380V/2.2-1.9kW/16A Dual spindle system • Precision machining: Thanks to its rigid cast iron bed structure, the machine can maintain tight tolerances (up to ±0.02 mm accuracy). It is equipped with a modern, 3-axis digital readout (DRO). This unit is a Mitutoyo KA Counter. Net price

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Dcodpfx Aboy Umhdszsh Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), functionality: fully functional, Friedrich Deckel FP3LG milling machine Original and well-maintained Deckel FP3LG. Travel range X-axis: 800 mm Dcjdsy Ulc Hjpfx Abzeh Travel range Y-axis: 300 + 200 mm Travel range Z-axis: 400 mm Spindle speeds from 40 to 2000 rpm. Various feed rates. Equipped with an automatic spindle cover.

Condition: good (used), table width: 260 mm, table length: 1,120 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 90 rpm, – ISO40 – 90–2000 rpm – Table 1120 × 260 mm – Automatic feed on X, Y, and Z axes – Rapid traverse – Digital readout on 3 axes – Quill – Milling head is swiveling – Lighting – 400V Dcedpfx Aoy Sirajbzsh

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 07885929, overall weight: 2,000 kg, Universal Lathe Prvomajska for sale - Type: ALG200 - Machine No.: 07885929 - Year: 1985 - Weight: 2000 kg Dcedpfxoy Rzvbj Abzeh - ATEST0 – 8110 - ACCESSORIES: Gear dividing device, rotary table, large vise, small precision vise, milling head for cutters and drills with collets, precision milling head for machining large holes, collets for direct clamping of milling cutters and drills. The machine is regularly serviced and maintained, and is in excellent condition. It has performed various toolmaking jobs. Connected to the electrical network and ready for immediate operation.

Condition: good (used), Year of construction: 2009, Internal Item No.: 26044 Dcsdpoy H D N Nsfx Abzeh Universal Milling Machine Optimum UF 100 Year of manufacture: 2009 + 3-axis digital readout Spindle taper: SK40 Spindle speed: 45 - 1660 rpm Table: 1120 x 260 mm Travel: X 625 / Y 220 / Z 430 mm Dimensions (LxWxH): 200 x 200 x 170 cm Weight: approx. 1500 kg The machine is fully functional and can be inspected under power, by appointment, in a heated storage facility of over 500 m².

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 163003, Knuth Milling Machine FPK 4 With extensive accessories. Working Area and Table Table Dimensions: The clamping table typically measures 800 x 400 mm. Vertical Table: Dcedpfxsy H D Ape Abzsh Additionally, the machine is equipped with a vertical table of approximately 1020 x 225 mm. Table Load Capacity: Maximum approx. 200 kg to 285 kg. Travels (Axes) X-Axis (Longitudinal): approx. 400 mm to 500 mm. Y-Axis (Cross): approx. 200 mm to 400 mm. Z-Axis (Vertical): approx. 365 mm to 400 mm. Spindle and Drive Spindle Mount: Standard ISO 40 (or SK 40 DIN 2080). Speed Range: The spindle reaches speeds of up to 2,000 rpm. Motor Power: The main drive delivers approx. 2.2 kW to 3.7 kW. Features and Special Equipment Feed: Automatic feed and rapid traverse on all three axes. Milling Head: The vertical milling head is usually swiveling ±90°. Weight: The machine, ready for operation, weighs approx. 1,180 kg to 1,550 kg.

Condition: used, Internal item no.: 26004 Universal Milling Machine Hermle UWF 800 + 3-axis digital readout + Hydraulic machine vice Röhm + Rotary, swivel, tilting table + Steady rest + Machine documentation + Machine feet Travel paths: X 500 / Y 300 / Z 400mm Table: 600 x 320mm Dcjdpfx Aboy Hittezeh Spindle mount: SK40 Power: 3 kW Dimensions (LxWxH): 140 x 190 x 170cm Weight approx. 1,000 kg The machine comes from a training facility and is in well-maintained condition. You are welcome to inspect the machine under power on more than 500m² of heated storage area.

Condition: not inspected (used), Tool Milling Machine HERMLE UWF 802 M - Travel Control HS 401 - Travel X/Y/Z: 500x430x400 mm - Spindle speed range: 18–3550 rpm - Stepless feed on all three axes - Rapid traverse 0–1.6 m/min on all three axes - Vertical and horizontal milling device - Tool holder ISO 40 - Hydraulic tool clamping - Central lubrication - Drive power: 6 kW - Work lamp - Chip tray - Documentation Dcsdpjy Ddz Hofx Abzjh Dimensions (LxWxH): 1.9x1.8x1.9 m / Weight: 1900 kg Errors and omissions excepted.

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm turning speeds: 5 - 5000 U/min quill stroke: 90 mm total power requirement: 9 kW feed range: 0-10.000 mm/min weight of the machine ca.: 3260 kg dimensions of the machine ca.: 2200x2800x2000 mm spindle: 6 kW Dodjy A Rmgepfx Abzoch Accerories vertical milling head SK 40 CNC universal milling machine (without toolchanger), Equipped with CNC-Heidenhain TNC 407 dwheel coolant device *

Condition: good (used), rotational speed (max.): 2,800 rpm, rotational speed (min.): 90 rpm, – 90/2800 rpm Dsdpfx Aboy Abzbjzsch – Table 1000 x 200 mm – Automatic feed on the X-axis – Rapid traverse – Swiveling milling head – Coolant system – Lighting – Tooling – 380V

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 202011019N, feed rate X-axis: 720 m/min, feed rate Y-axis: 720 m/min, feed rate Z-axis: 720 m/min, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, quill stroke: 120 mm, quill travel distance: 120 mm, table width: 320 mm, table length: 1,270 mm, position of the milling head: vertikal + horizontal, type of input current: three-phase, rotational speed (max.): 1,800 rpm, rotational speed (min.): 50 rpm, table load: 300 kg, overall weight: 2,200 kg, input voltage: 400 V, distance table to spindle center: 400 mm, input frequency: 50 Hz, Universal Milling Machine ROGI WM6350F in a robust and stable design for professional use in mechanical engineering, toolmaking, as well as in workshops and training facilities. The machine features a large working table measuring 1270 x 320 mm, allowing for precise machining of a wide variety of workpieces. With travel distances of approximately 800 mm on the X-axis, 300 mm on the Y-axis, and 400 mm on the Z-axis, the machine offers high flexibility in operation. Equipped with an ISO 40 spindle taper and a powerful spindle motor (approx. 3 kW), this milling machine is suitable for both light and medium-duty machining tasks. The spindle speed can be set within a range of 50 to 1800 rpm. The milling head can be used both vertically and horizontally, thus ensuring a wide range of machining capabilities. The rigid construction and substantial machine weight of approximately 2200 kg ensure low-vibration operation and high accuracy. Technical Highlights: - Table size: 1270 x 320 mm - Travel distances: X 800 mm / Y 300 mm / Z 400 mm - Spindle taper: ISO 40 Dsdpfxeyw N Urj Abzoch - Spindle speed: 50 – 1800 rpm - Spindle motor power: approx. 3 kW - Quill stroke: approx. 120 mm - Total weight: approx. 2200 kg - Power supply: 400 V / 50 Hz / 3-phase The machine is in used, functional condition. Inspection and test run are possible by appointment.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP4M Active Manufacturer: Deckel Type: FP4M Condition: used, good Digital readout: 3 - axis digital readout Heidenhain Travels: X - axis: approx. 500 mm Y - axis: approx. 400 mm Z - axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 - 2500 rpm Tool holder: ISO 40 Hydraulic tool clamping Djdpfeyub Auox Abzech Drive power: approx. 6.0 kW Feed rates & rapid feeds: in all 3 axes Feed range: approx. 8 - 630 mm/min Rapid traverse: approx. 3.0 m/min L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg Machine light Spindle guard Scope of delivery: - 10x tool holders - Allmatic high-pressure vice - documentation - Spindle guard

Condition: new, functionality: fully functional, feed length X-axis: 590 mm, feed length Y-axis: 180 mm, feed length Z-axis: 320 mm, Powerful universal milling machine UWF 80 E designed for professional craftsmen and specialists. Equipped with two spindles – horizontal and vertical. Large clamping table surface of 1000 x 240 mm, additionally tiltable within a range of +/-45°. Automatic feed for X and Y axes. Swiveling head +/-90°. 3-axis digital display. Schneider Electric electrical system. ISO 40 taper. Features: - Capability for both vertical and horizontal milling – extends the application range - Milling table tiltable by 45° to the right and left - Quiet operation with ball bearings ensures excellent concentricity - Easy spindle speed adjustment Dcjdpsytfcvsfx Abzeh - Swiveling milling head from -90° to +90° - Large clamping table area: 1000 x 240 mm - Automatic feed for X and Y axes, including rapid traverse for X axis - Milling: spindle feed set via handwheel - Drilling: spindle feed set via feed lever - Quick-switching clutch between automatic and manual spindle feed - Right and left spindle rotation for thread cutting - Dovetail guides - Precision cross table with T-slots - 3-axis digital display included Technical specifications: - Table size (width): 1000 mm - Table size (depth): 240 mm - Spindle taper: ISO 40 - Spindle speed min: 115 rpm - Spindle speed max: 1750 rpm - Horizontal spindle speed min: 60 rpm - Horizontal spindle speed max: 1350 rpm - Speed change – number of steps/stepless: vertical – 8, horizontal – 9 - Quill stroke: 125 mm - Travel in X axis: 590 mm - Travel in Y axis: 180 mm - Travel in Z axis: 320 mm - Spindle to table distance: 0 – 375 mm - Spindle to column min. distance: 230 mm - Spindle to column max. distance: 685 mm - Table swivel: -45° to +45° - Milling head tilt: -90° to +90° - Automatic feed X axis: (8) 32 – 700 mm/min - Automatic feed Y axis: stepless mm/min - Number/size/spacing of T-slots: 16 mm - Motor power: 1.5 kW - Motor power S1 100%: 0.85 kW - Second spindle motor power: 1.5 kW - Dimensions (width): 1500 mm - Dimensions (depth): 1430 mm - Dimensions (height): 2100 mm - Weight approx.: 980 kg Scope of delivery: - 3-axis digital display ES 12H - M16 drawbar - LED lighting - Coolant system - Automatic table feed for X axis - Automatic table feed for Y axis - Reducing sleeve ISO 40 / MT3 - Reducing sleeve ISO 40 / MT2 - Reducing sleeve ISO 40 / B18 - Long milling arbor 27 mm - Horizontal support - Legally required safety covers - Full technical documentation (DTR) in Polish - CE certificate - 24-month warranty for all components at no extra charge

Condition: used, Year of construction: 2003, gebraucht 2003 4544 prompt, Zwischenverkauf v Spanien 13800 € 1 50 - 1700 (12) U/min ISO 40 600/210/400 mm 800 x 225 mm 1500 mm 1350 mm 1850 mm 950 kg 1,5 kW with 3-axis digital display or Cooling equipment Machine lamp Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing Table enclosure automatic feeds in X and Y Machine feets User Manual and EG Confirmation english BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Dcsdpsyrhtzofx Abzjh Details:

Condition: used, Year of construction: 2005, gebraucht 2005 4541 prompt, Zwischenverkauf v China 5700 € 1 40 - 1.300 U/min ISO 30 465 x 230 x 380 mm 1000 x 280 mm 2.2 kW 1400 mm 1300 mm 2200 mm 1120 kg 90 ° 115 - 1.750 (115, 230,290 U/min Milling head rotatable and swivellable +/- 90° with manual quill 120 mm travel range Spindle sleeve feed takes place via a turnstile or with the fine feed by means of a handwheel Spindle head 350 mm manually traversable Max. drilling capacity 30 mm Manual tool clamping vertical/horizontal by means of tightening screw Automatic feed in X Axis,(8) 12 - 370 mm/min Coolant unit Chip tray Lighting 1x Collet chuck set 1 Stk Drill chuck with mounting 4 Milling cutter holders Does not comply with the German UVV & Austrian AMVO Dcjdpoyrhr Dofx Abzoh BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2002, gebraucht 2002 Dedpfx Aboyrhn Eozjch 4543 prompt, Zwischenverkauf v Spanien 11400 € 1 50 - 1700 (12) U/min ISO 40 600/210/400 mm 800 x 225 mm 1700 mm 1500 mm 1960 mm 950 kg 1,5 kW with 3-Axis Digital display Fabr. Time Technology Europe Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing and 1 pc. long milling arbor Coolant device Machine light automatic feeds in X and Y Machine feet with vibration absorbers no User Manual DOES NOT COMPLY WITH GERMAN UVV & AUSTRIAN AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2017, Milling machines Dcsdpfx Ajym Rrvebzoh Travel distance X: 800 mm Travel distance Y :800 mm Travel distance Z: 550 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain TNC 640 spindle chuck: HSK-A63 spindle revolutions: 20000 rpm Speed range to: 20000 U/min table size X: 450 mm table size Y: 450 mm max. workpiece weight: 300 kg tool changer: 170 - time input Power : 25 kW Torque: 120 Nm Rapid traverse: 50 m/min feed rate: 50000 mm/min spindle cooling chip conveyor control Heidenhain 5-axis CNC machining center Heidenhain TNC 640 control 170-position tool changer HSK-A63 spindle interface KNOLL chip conveyor KNOLL oil filtration system KF 400 / FKA 620 HABOR cooling unit suitable for steel machining high precision for tool and mold making automated workpiece handling for series production

Condition: good (used), Year of construction: 1982, travel distance X-axis: 900 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, quill stroke: 80 mm, quill diameter: 100 mm, total height: 2,000 mm, total width: 1,900 mm, total length: 2,000 mm, table width: 350 mm, table length: 1,250 mm, table load: 400 kg, overall weight: 2,100 kg, Universal Milling Machine, gear type, swiveling and tilting head, feed range X/Y/Z 900/270/450 mm, table size 1250x350 mm, motor 7,5 KW, 12 speeds 45-2000 rpm., ISO 40, quill travel 80 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling device, coolant system, dimensions 1900x2000x2000 mm, weight ca. 2100 kg; accessoires into cabinet Dodpeyly Drefx Abzjch

Condition: used, Technical Data: Travel X/Y/Z: 700 / 250 / 430 mm Djdpsyi E Udsfx Abzjch Upper slide travel: 630 mm Spindle speeds: 45 - 1660 rpm Spindle taper: SK 40 Control: conventional Table feed: 24 - 402 mm/min Milling head swivels: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (W x D x H), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital readout - Machine lamp - Coolant device - Machine feet

Condition: used, Technical details: Djdjyhwh Topfx Abzjch Type: Deckel FP3 / 4A-TC with Contour 3 Year of manufacture: 1987 In 2025, a new power supply unit and a new ballast circuit were installed The tool changer magazine is no longer in operation.

Condition: ready for operation (used), TOS milling machine FN 32, spindle taper SK 40, speed range 40–2000 rpm Dsdpfx Absyf Efhjzech

Condition: good (used), Internal Item No.: 25110 Universal Milling Machine Deckel FP3 Machine No.: 2482 + 3-axis digital readout + Safety guard with switch (UVV) + Machine lamp + Various SK40 tool holders and collet set (S20x2) Dcjdpeyb Su Usfx Abzjh Milling table: 800 x 420 mm Spindle taper: SK40 Max. speed: 2000 rpm Drive power: 3 kW Travel X/Y/Z: 500/300/400 mm Dimensions (LxWxH): 1400 x 1500 x 1800 mm Weight: approx. 1500 kg The machine is fully functional and can be demonstrated under power by arrangement in a heated storage area of over 500 m².