Condition: good (used), I sell a pneumatic press. Geloun U Uiehccqpoui

Condition: excellent (used), Catalogue no.: 7815 TECHNICAL DATA Worktable dimensions (L/W): 2900x1200mm Overall table dimensions: 3000x1300mm Operating temperature: ±40-60°C Maximum temperature: ±60°C Total machine power: 5.25kW Vacuum pump power: 0.90kW Vacuum pump capacity: approx. 25/30m3/h Noise level: approx. 70dB Guelhoxwygcoccqpei Dimensions (L/W/H): 3060x1400x1400mm Weight: 360kg – DTR Documentation – Unpainted – Very good condition – Used press Net price: 21,900 PLN Net price: 5,200 EUR depending on the exchange rate of 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), functionality: fully functional, Brief description Table dimensions: 3000 mm x 1300 mm Number of cylinders: 6 Guolhcoxvx Ezscqpsi Pressing force: 90 tons Table opening: 400 mm Heating with hot water Boiler: 20,000 kcal/h

Condition: used, Year of construction: 2006, functionality: fully functional, total width: 1,900 mm, total height: 1,800 mm, total length: 2,500 mm, briquette diameter: 80 mm, overall weight: 2,400 kg, type of input current: three-phase, oil tank capacity: 600 l, – after technical inspection – Italian production – year of production 2006 – DTR TECHNICAL PARAMETERS: – briquette Ø: 80 mm – max. briquette length: 80 mm – efficiency: 350 kg/h – engine power: 27.5 kW Guslhccqjv T Uphspoi – hydraulic crush: 1400 kg/cm2 – max. operating force: 150 bar – oil capacity: 600 l – container diameter: Ø 1200 mm – container height: 90 cm – dimensions (length/width/height): 2500 x 1900 x 1800mm – net weight: 2400 kg

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Gjlhccqjxwp S Ispjui Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2024, Exhibition machine Garbsen, new, complete in standard configuration with: - Sturdy, torsion-free steel frame, welded and bolted construction - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams featuring proven tolerance compensation system (System Ganner) for tightly pressed carcass joints - Counterpressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support panels - Continuous pressing surface height of 95 mm on the lower vertical press beam - Electromotive adjustment of both press beams via precision trapezoidal spindle screws (with increased pitch and concentricity accuracy) and high-performance recirculating nuts with grease reservoir - Pressing is carried out electromotively, by 2 separate helical geared motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable using two potentiometers and regulated via frequency converters; the pressing force control is therefore absolutely wear-free - Pressing force for the horizontal press beam: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical press beam: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second - Extremely simple operation via 6 separate push buttons, 8 movement processes can be selected via the control system - Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm Guelhcoxwhrmecqpoi - Working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500x1200x2300 mm (L x W x H) Image includes special accessories: machine feet. Surcharge for rapid traverse speed per unit for fast positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be deactivated for pressing special components. Set of machine feet for working height 500 mm per unit. Location: Garbsen

Condition: used, Year of construction: 2002, functionality: fully functional, Manufacturer: Orma Macchine (OleoSystem), Italy Model: LS-ECO 30/13 Year of manufacturer: 2002 Type: Panel press Working dimensions: 3000x1300 mm Thickness of the panels: min. 12 mm/ max. 50-60 mm Guslhsxwwggeccqpsi Electric: 308 V, 50 Hz, 3 kW, 7A Machine dimensions: L 4000 x W 2100 x H 1900 Weight 3900 kg

Year of construction: 2025, condition: new, functionality: fully functional, The vacuum bag for professionals and handymen - DIRECTLY FROM THE INVENTOR Gjlhccsxu Ed Isqpeui Vacuflex is the ideal vacuum bag for professional users who want to profitably produce exceptional workpieces made of wood or wood-like materials. The robust and fabric-reinforced material guarantees longevity even when used at the highest level. Thus, the vacuum bag fits perfectly into professional production processes. With Vacuflex, you are able to extend your product range extremely, achieve better results in the production process significantly and inspire your customers with short production times. Vacuflex is the number one choice when it comes to manufacturing very large workpieces in the fastest way possible. For this reason, it is also ideal as a complement to vacuum presses and gives you the certainty that you can always cover the widest possible range of production processes cost-efficiently without suppliers. With this system, which has been tried and tested for over 40 years, hundreds of users have already been able to achieve extraordinary results in production and sustainably increase their success through the use of vacuum technology. It is ready for use very quickly and amortizes itself in a short period of time, even at low utilization.

Condition: excellent (used), Tiger TM/8-E hydraulic veneering press Shelf length 3300mm Shelf width 1300mm Maximum charge height 400mm Press on 8 cylinders Cylinder diameter 70mm Shelves heated with water Guolhccsxr Trueqpoi Machine weight 4600kg Machine dimensions 403x153x208cmH

Condition: used, Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. Gujlhcewng S Aecqpoi - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Material of press plates: Aluminium - Number of cylinders [pcs]: 10 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC Golhccqswp Rqfspoui • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: used, Year of construction: 1980, machine/vehicle number: 8003-081, This Maweg frame press, model: Euro 5, is being auctioned in our industrial/machinery auction – insolvency auction Wietec Fenster GmbH: machinery fleet, workshop equipment, trailers, online. You will find this and many other items on our platform. Guelhccjxu Tuzeqpei

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: BP 500 A, DESCRIPTION BRIQUETTING PRESS This press is intended for compressing secondary raw materials into briquettes (briquette shape: rectangular). Technical specifications of the press: Dimensions: Length: 1800 mm (2100 mm for transport) Width: 1800 mm (2000 mm for transport) Height: 1900 mm (2200 mm for transport) Net weight: 2945 kg Power supply: 380 V, 50 Hz, 33 kW, 70-100 A Output capacity: 450 kg/h (+/-50 kg depending on raw material type and fraction) Noise level: A-weighted sound pressure level at operator’s station: 77.8 dB +/-5 dB Compression pressure: Minimum: 1000 kg/cm² Maximum: 1700 kg/cm² Pressure: Max. 300 bar Raw material moisture content: No more than 14% Briquette dimensions: Width: 150 mm Thickness: 60 mm Length: 40-105 mm Permissible ambient temperature for operation: -20°C to +35°C (up to +50°C with additional cooling system) The press consists of: Gujlhcsxmav Necqpei Electrical system – controls the hydraulic press system. There are four electric motors: the first (30 kW) drives the main hydraulic pumps, the second (1.1 kW) powers the cooling hydraulic pump, the third (0.55 kW) drives the cooling fan of the oil system, and the fourth (1.5 kW) drives the sawdust feed screw. The operation of the motors and hydraulic valves is managed via contactors and intermediate solid-state relays by a microprocessor with expansion modules. For visualization and parameter adjustment, a liquid crystal display with buttons is provided. Hydraulic system – manages the operation of hydraulic cylinders using pumps, high- and low-pressure valves, solenoid valves, and hoses. There are three hydraulic cylinders: the first is the main cylinder for compressing sawdust, the second is a vertical cylinder for initial sawdust compaction, and the third is a forming cylinder for moving the briquette form. Also installed are an oil cooling system with a pump and air cooler. Oil filtration is performed by the main high-capacity filter, a filter for the cooling system, and a fine filtering unit. Feeding of raw material into the press is performed by an integrated loading hopper. The raw material in the hopper is mixed intermittently to prevent bridging. The mixer is driven by a chain from the auger gearmotor. The auger cyclically feeds the material to the shaft of the vertical cylinder. The hopper is equipped with two level sensors – lower and upper. When the hopper is enlarged, the sensors can be repositioned as needed. Control – dual-mode, manual and automatic, is provided. All control equipment is mounted in the electrical cabinet. Automatic control constitutes the normal press operation without operator intervention. Manual control is used for press setup, troubleshooting, returning the cylinders to their home positions, or in emergency situations. Operation is facilitated by a display located on the cabinet door. It allows for viewing and adjustment of input parameters, as well as real-time monitoring of press status and error messages.

Year of construction: 2025, condition: new, functionality: fully functional, MOVE — the high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. With extensive flexibility, due to absolute mobility and revolutionary folding mechanism, to reduce the floor space to 45 % when folded. High-precision vacuum press with flap opening incl. - Revolutionary folding mechanism (reduction of the floor space to 45 %) - 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) - optional, automatic switch-off when pressure is reached (with large vacuum volume) - Pressure regulation 400 to 900 mbar, analog vacuum pressure gauge - Highly elastic natural rubber membrane (up to +130 °C) - Membrane fast-change system - Stable phenolic resin worktop (up to +120 °C), glued 15 times - Gas springs for flap opening - Vacuum pressure gauge - Connection for external vacuum bag - Smooth-running swivel castors - FESTO pneumatics and SIEMENS electrics Technical data and dimensions: Gujlhccexu Ednsqpei - Usable area: approx. 3050 x 1350 mm - Overall dimensions: approx. 3700 x 1700 x 1100 mm - Overall dimensions (folded): approx. 3650 x 770 x 1780 mm - Dimensions inside the frame: approx. 3130 x 1430 mm - Voltage: 230 V - Power: 1,2 kW - Supply frequency: 50 Hz - Weight: 670 kg

Condition: good (used), Block Press Block Press SIPA Max working length: 3000 mm Max working height: 1300 mm Guslhccexrfvxjqpsi Number of vertical cylinders: 4 Number of frontal clamps: 6

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. Guelhcsfh Tmmscqpoi inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: refurbished (used), Year of construction: 1921, functionality: fully functional, briquette diameter: 90 mm, overall weight: 6,000 kg, power: 55 kW (74.78 HP), year of last overhaul: 2025, Complete line with 2 presses in excellent condition! Motor approx. 55 kW, Capacity approx. 1,400 kg/h, Press cylinder approx. 90 mm (with or without hole!) Guslsxdrz Ejhccqpoi Preheated to approx. 60°C (circulating with heat recovery via the oil tank) Cross-cut saw, fully automatic, fully automated saw feed, incl. control cabinet Packaging unit Consisting of: 1 rubber conveyor belt (briquette feed); followed by shrink tunnel system, 400 V, shrink tunnel opening approx. 1,600/600 mm, max. height approx. 200 mm, roller outfeed approx. 3 m Buffer bin (silo approx. 20 m³) for press feeding

Condition: excellent (used), CATALOG NUMBER 6933 TECHNICAL DETAILS - loading areas: 1 - front: manually adjustable clamping beams, 6 pcs - top: pneumatic pressing beams, 4 pcs - length of each pressing beam: 795mm - side: pneumatic clamps, 2 pcs - max length of glued components: 3300mm - max height of glued components: 1300mm - max thickness of glued components: 170mm - dimensions (L/W/H): 4200x800x1960mm - weight: 820kg ADVANTAGES – manufactured in Poland – mobile – unpainted – used press, very good condition Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change) Guolhccqok Uxwwepji

Condition: new, Year of construction: 2025, Hydraulic briquetting press with 4 kW main motor. It produces 50mm diameter briquettes. Capacity of the machine is: 30-50 kg/hour. The raw material hopper is 1m3, and has an agitator on the bottom. The machine has an oil cooler for the continous work. Gjlhof Hmi Ejccqpsui

Year of construction: 2025, condition: new, INFINITY - the vacuum press system in special lengths The Columbus INFINITY is the new and groundbreaking vacuum press system that can be constructed in the length desired by the user on request. The specially created and eponymous Infinity Principle, according to which the usable area in terms of length can be increased very cost-effectively almost to infinity, is used in each individual component. The system offers both maximum flexibility and maximum efficiency, because where the Infinity Vacuum Table and the Rolling Membrane System offer infinity, the Multi-Zone Suction guarantees maximum control. Thanks to this Multi-Zone Suction, only that section of the usable area that is currently in use is vacuumized. INFINITY is perfect for all users who value an infinite usable area for a wide variety of special pressing with maximum yield volume. Directly from the manufacturer - including warranty! Execution: Length and width on customer request! Table base made of stable, welded metal construction, adjustable table feet. The table material is a 21 mm thick birch plywood board. An approx. 15 mm wide vacuum suction groove is milled on the table surface to seal the membrane. The membrane is wound onto a reel and is manually unrolled onto the table surface using a very smooth-running linear slide. Gujlhcsxu Eduscqpei The cavities of the table frame serve as vacuum buffer storage. The vacuum pump has an output of 100 m³/hour. The table surface has several suction grooves, these are divided into 5 suction zones. The table load is about 200 kg / m

Condition: excellent (used), SIMIMPANTI 3500×1300 hydraulic veneer press Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Gelhexqlqmoccqpoui Shelves heated with water

Year of construction: 2012, condition: excellent (used), COLUMBUS Vacuform Standard High-performance vacuum pump BECKER Vacuum tank 200 l Digital pressure regulation Digital vacuum gauge Highly elastic natural rubber membrane Sturdy worktable Swivel castors with brakes Working dimensions approx. L x W 2900 x 1300 mm Pressing pressure max. 0.85 kg/cm2 = approx. 29 t Connected load 0.75 kW, 400 V 50 Hz Tank capacity 200 l CE Transport dimensions approx. L x W 3100 x 1550 mm Gslhcoxgg Tbecqpeui Weight approx. 400 kg

Condition: new, Year of construction: 2025, Small hydraulic briquetting press. Main motor is 4 kW, briquette diameter is 50mm. Capacity of the press is 30-50 kg/hour. The machine is new, and has CE certificate. Customer can order it with oil cooler. For more information visit our YouTube channel, webpage or Facebook site. Golhccqefk N Tpjpeui

Year of construction: 2025, condition: new, Exclusive to Columbus: the digital master manual with user knowledge from +45 years Modular system - can be upgraded at any time with a vertical opening mechanism and heating system for plastic panels! Directly from the manufacturer - including warranty! PIONEER Basic L - high-precision vacuum press incl.: • Membrane fast-change system • Gas springs for flap opening • Highly elastic natural rubber membrane (up to +130 °C) • Stable phenolic resin worktop (up to +120 °C) • 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) from BECKER • Analog vacuum pressure gauge • Connection for external vacuum bag • Feet including smooth-running swivel castors • Mounting fixture for vertical opening system • FESTO pneumatics and SIEMENS electrics Technical data: • Voltage: 400 V Gujlexu Edhohccqpji • Power: 1,3 kW • Supply frequency: 50 Hz Dimensions: • Usable area: approx. 3050 x 1350 mm • Dimensions inside the frame: approx. 3130 x 1430 mm • Max. workpiece height: approx. 600 mm • Overall dimensions: approx. 3700 x 1640 x 1080 mm

Year of construction: 2025, condition: new, Exclusively from Columbus: the digital master manual with user knowledge from +45 years enables safe use of the press Guolexu Ec Rshccqpoi Modular system: Vacuum press with flap opening - can be upgraded at any time with a vertical opening mechanism for high workpieces and better usability AND heating for forming plastic panels (such as Corian) 3 different sizes available Austrian, ISO-certified mechanical engineering quality with the exclusive use of branded components guarantees many years of use