Anc. Ets Aloyse Heidesch Sàrl

Condition: excellent (used), Workpiece dimensions: Data Workpiece length = 260-3000 mm Working width = 50-230 mm Working height = 10-70mm Cross conveyor table specification: Conveyor length = 2200 mm Conveyor width = 1000mm Adjustable overall height = 810 mm Number of flat crossfeed chains= 5 ( 80mm, 280mm, 500mm, 900mm and 2200mm) Feed speed = 18 m/min Feed motor = 0.75 kW (1 hp) Accelerator specification: Feed roller width = +/- 50 mm Driven feed rollers = 4pcs (2 top, 2 bottom) Feed motor, hydraulic = 5.5kW Crsdpfx Aozyz Adsptog Feed roller diameter = 170mm upper and 100 mm lower Infeed speed infinitely variable = 20-140 m/min Max.cycle rate/min. = 60

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. width of workpiece: 220mm - max. height of workpiece: 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW – 5th spindle electrically adjustable up/down Cjdpfxezyl T Ts Aptorg 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - top: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - bottom: - infeed roller, toothed, pulling, swiveling in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg - Infeed conveyor with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable top pressure - conveyor length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Net price: 179900 PLN Net price: 42850 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Catalog number 7995 Codpfx Aezx Sv Soptsrg TECHNICAL DATA - max. planing width 240mm - max. planing height 140mm 4 spindles: 1) horizontal bottom 240mm, 5.6kW 2) vertical right 140mm, 5.6kW 3) vertical left 140mm, 7.5kW 4) horizontal top 240mm, electrically adjustable up/down, 0.37kW - 7.5kW - diameter of all spindles 40mm - all spindles adjustable up/down and right/left - from above, 5 toothed, twisting feed rollers, including 1 double roller - from above, 2 rubber feed rollers - from below at the outlet, a split metal feed roller - rollers are pneumatically pressed - 3 side pressure rollers - electric adjustment of planing thickness, 0.37kW - length of infeed table 2080mm - stepless feed rate adjustment via frequency inverter - feed via Cardan shafts - feed motor 3.7kW - central lubrication - diameters of dust extraction nozzles 4x125mm - dimensions L/W/H 3600x1650x1700mm - weight approximately 3000kg ADVANTAGES – German-made, GUBISCH brand – with 4 heads – DTR documentation available – used planer, very good condition Net price: 32900 PLN Net price: 7840 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW Csdpjzx Suujfx Aptsrg - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8060 TECHNICAL DATA - max. width of workpiece: 230mm - max. height of workpiece: 180mm - number of spindles: 5 1) horizontal lower: 230mm, 7.5kW 2) vertical right: 180mm, 5.5kW 3) vertical left: 180mm, 5.5kW 4) horizontal upper: 230mm, 7.5kW - 4 spindles with electric up/down adjustment from the control panel 5) horizontal lower: 230mm, 7.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm – top: - 6 feed rollers, toothed, including 2 double rollers - 2 feed-out rollers, rubber Crjdpfx Apszx Spxotog – bottom: - feed roller, toothed, driven, with swivel mechanism in the lower table, in front of the first spindle - 2 pneumatic side pressure rollers - feed-out roller, metal, smooth - all rollers with pneumatic pressure - length of feed table: 2180mm - table adjustable up/down - central lubrication - electric adjustment of planing thickness - lifting motor approx. 1.1kW - stepless feed speed control via frequency inverter - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 5x150mm - dimensions (L/W/H): 4100x1750x1900mm - weight approx. 3800kg ADVANTAGES – with 5 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 68900 PLN Net price: 16405 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8059 TECHNICAL DATA - max width of workpiece: 200mm - max height of workpiece: 140mm - number of spindles: 4 1) horizontal lower: 200mm, 5.5kW 2) vertical right: 140mm, 4kW 3) vertical left: 140mm, 4kW 4) horizontal upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm – top: - infeed rollers, toothed, 6 pcs, including 2 double rollers - outfeed roller, rubber, double – bottom: - side pressure roller - infeed roller, toothed, driving, angled in the lower bed - side pressure roller - outfeed roller, driving, metal, smooth - all rollers are pneumatically pressed - length of infeed bed: 1600mm - bed adjustable up/down - central lubrication - electric adjustment of planing thickness - lifting motor: 1.1kW - stepless feed rate adjustment - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 4x140mm - dimensions (L/W/H): 3200x1700x1750mm - weight: 3000kg Crodpfjzx Sn Uex Aptsg ADVANTAGES – with 4 heads – ideal for wet and dry wood – used machine, very good condition Net price: 51900 PLN Net price: 12357 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalog number: 7715 TECHNICAL DATA - max. width of workpiece 220mm - max. height of workpiece 130mm - 8 spindles: 1) horizontal lower 220mm 5.5kW 2) vertical right 130mm 7.5kW 3) vertical left 130mm 7.5kW 4) vertical right 130mm 5.5kW 5) horizontal upper 220mm 11kW Cjdpfxezx Rlxs Aptsrg – 5th spindle with electrically adjustable up/down movement 6) horizontal lower 220mm 5.5kW 7) horizontal lower 220mm 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360° 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter – from below: - infeed roller, toothed, pulling, pivoting in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan rollers - rollers with pneumatic pressure - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric adjustment of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of dust extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - dimensions of the control cabinet (on pallet) 1020x1000x2230mm - weight approximately 5000kg ADVANTAGES – with 8 heads – universal spindle – ideal for both wet and dry wood – German production, WEINIG brand – unpainted – very few operating hours – used planer, in perfect condition Net price: 125900 PLN Net price: 29976 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 7816 TECHNICAL DATA DDCA - Surfacing cutter length: 180 – 845mm - Surfacing cutter width: 30 – 75mm - Surfacing cutter thickness: 10 – 45mm - Spindle diameter: 30mm - Max. disc diameter: 250mm - 5 spindles: - Left side: 1) Vertical upper: 2.2kW 2) Horizontal lower: 2.2kW Right side: 1) Vertical lower: 2.2kW 2) Vertical upper: 2.2kW 3) Horizontal lower: 2.2kW - Spindles adjustable up/down, left/right - Material pressure: 2 pcs - Smooth feed rate adjustment: 0-10m/min - Spindle diameter: 5x100mm - Dimensions (L/W/H): 1870/2230/1320mm DDGA - Width of workpiece: 35 – 130mm - Thickness of workpiece: 10 – 40mm - Minimum length of workpiece: 200mm - Spindle arrangement: 1) Lower: 5.5kW 2) Right: 5.5kW 3) Left: 5.5kW 4) Upper: 5.5kW - Spindles adjustable up/down - 6-blade heads fitted on upper and lower spindles - Spindle diameter: 40mm - Milling cutters fitted on right and left spindles, max. diameter: 50mm - Spindle diameter: 30mm - 2 feed rates: 4.9kW - Central chain lubrication via oil pump - Spindle diameter: 4x125mm - Dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish made - 5 spindles - Unpainted - Very good condition - Used production line Net price: 52900 PLN Crodpfx Apozx Rkzoteg Net price: 12600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7964 TECHNICAL DATA - max. width of workpiece: 630 mm - max. thickness of workpiece: 250 mm - from above: - toothed feed roller - pressure rollers - pressure pad - toothed feed roller, 2 pcs - pressure pad - 4-knife planing shaft, 630 mm, 15 kW - pressure pad - smooth feed roller - from below: - adjustable infeed table - toothed feed roller - 4-knife planing shaft, 630 mm, 7.5 kW - adjustable feed roller in the lower table, 2 pcs - electric height adjustment - lifting motor 0.65 kW - 6 feed speeds - feed motor 4 kW - diameter of dust extraction nozzle: 2 x 160 mm - dimensions (L/W/H): 1780 x 1850 x 1700 mm Csdpfjzx Rknsx Aptjrg - weight approx. 3000 kg ADVANTAGES - new knives installed - manufactured by the German brand KUPFERMUHLE - very good condition - used planer Net price: 37,900 PLN Net price: 9,024 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalogue number: 7894 TECHNICAL DATA - Min / max working width: 20 / 165 mm - Min / max working height: 8 / 100 mm 4 spindles: 1) Lower horizontal, 165 mm, 4 kW 2) Right vertical, 100 mm, 4 kW 3) Left vertical, 100 mm, 4 kW Credpfszx Ri Rex Aptog 4) Upper horizontal, 165 mm, 5.5 kW - All heads adjustable up/down, left/right - Spindle diameter: 40 mm From above: - 6 driven, toothed infeed rollers (including 3 double rollers) - 2 driven outfeed rollers, smooth rubber From below: - Side pressure before and after the lower feed roller in the table - Lower infeed toothed, driven, swiveling roller in the table before the first spindle - 2 side pressure units - Driven outfeed roller, metal, smooth - All rollers pneumatically pressed - Length of infeed table: 1770 mm - Table height adjustment up/down - Central lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment - Feed motor: 3 kW - Feed via cardan shafts - Enclosed in cabin - Extraction connection diameter: 4 x 130 mm - Dimensions (LxWxH): 3200 x 1700 x 1850 mm - Weight: 2800 kg ADVANTAGES – 4-head configuration – Ideal for wet and dry timber – Infeed toothed, driven, swiveling roller in the lower table before the first spindle – Original DTR technical documentation + CE – Used machine, excellent condition Net price: 49,900 PLN Net price: 11,880 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1979, working width 250mm working height 140mm Cjdpfszxz Hmsx Apterg 8 heads 3 toothened rolls in the table before first head heads set: bottom/right/left/right/left/top/top/bottom variable regulated feeder to 100m/min spindles diameter 50mm two side bearings of spindles feeder with cardan spindles speed 6000 rpm pneumatic pressure of feeding rolls two side heads regulation two axes heads regulation iron cast body

Condition: used, functionality: fully functional, Weinig Unimat 300 four-sided planer Working width: 230 mm Working height: 120 mm Cedpfjzxzmgjx Aptsrg Number of spindles: 5 Spindle arrangement: 1. Bottom: 5.5 kW 2. Left 3. Right: 11 kW 4. Top: 5.5 kW 5. Bottom: 4 kW Feed speed adjustable via inverter up to 12 m/min Pneumatic pressure pads

Condition: excellent (used), functionality: fully functional, Working width 220 mm Working height 120 mm 5 spindles Spindle arrangement: bottom/right/left/top/bottom Spindle diameter 40 mm Motors: 4 kW, 5.5 kW, 5.5 kW, 4 kW Table length 198 cm Table lubrication Cjdpfx Apszxyvmetjrg Stepless feed speed adjustment Pneumatic pressure on feed rollers Head adjustment in two axes Electric adjustment of top head – 0.25 kW Feed motor power 2.2 kW

Condition: excellent (used), Weinig Unimat 500 four-sided planer max. planing width: 230 mm max. planing height: 120 mm 6 heads Spindle 1 - 7.5 kW Spindle 2-3 - 11 kW Spindle 4 - 11 kW Credpfx Apszxyvaetog Spindle 5 - 11 kW Spindle 6 - 7.5 kW Memory system control 40 mm spindles Feed controlled by an inverter Robust planer from WEINIG, machine inspected, well-maintained, in very good condition Machine dimensions: length 450 cm, width 200 cm

Condition: like new (used), working width 630 mm stepless feed adjustment 4-knife cutterhead Cedpfx Apozxyu Aeterg maximum workpiece height 240 mm electric height adjustment 7.5 kW motor star-delta start 380V power supply

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Cedpozxyfzsfx Aptsrg Stationary machine: Yes Clamping system: Clamps Safety feature: Photoelectric cell Controls and software SCM XILOG Minimum dimensions: 3920x1170x2150

Condition: ready for operation (used), working width 260mm working height 150mm toothed roller in the feed table before the first head 5 heads head arrangement: lower/right/left/top/bottom Crjdjzxyddjpfx Aptog electric setting of planing dimensions stepless feed adjustable up to 24m/min pneumatic clamps of the pulling rollers head adjustment in two axes engines: 1. 11kW 2. 11kW 3. 12kW 4. 11kW 5. 7.5kW pulling roller drive via cardan shafts feeding table length 2m chrome plated table additional pulling roller at the right head, so-called tandem horizontal pneumatic clamps set of heads included with the machine

Condition: ready for operation (used), working width: 240 mm working height: 150 mm spindles: 5 spindles set: bottom/right/left/top/bottom spindles speed: 6000 RPM spindles diameter: 40 mm minimal diameter of tool: 100 mm max diameter of tool: 200 mm motors: 3x 5,5kW; 2x 4kW; 2,2kW pneumatic pressure of feeding rolls Crodozxyctjpfx Aptog year: 2010

Condition: ready for operation (used), Year of construction: 1989, Working width 300mm Working height 200mm 5 spindles Spindles diameter 50mm Crodezxx Hqjpfx Aptog Spindles set: 1. Bottom – 7,5kW 2. left – 7,5kW 3. right – 7,5kW 4. top – 11kW 5. bottom – 7,5kW Feed speed max 34m/min – variator Feeder with cardan Toothened roll in the table before first head Table lubrication Jointer on two last heads

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom spindles diameter 40mm Memory System control Credpfezxx D Nex Aptog table lubrication spindles speed 6000 RPM

Condition: excellent (used), Year of construction: 2005, working width 230mm working height 120mm 6 spindles spindles set: bottom/right/left/top/top/bottom second top spindle with Powerlock toothened roll in the infeed table Crsdpszxx Disfx Aptsg spindles diameter 40mm spindles speed 8000 RPM Power Com controller variable regulated feeder 5-30m/min

Condition: excellent (used), functionality: fully functional, working width 230mm Codpszxxy Rofx Aptsrg working height 140mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric regulation of pressure beam feeder with cardan variable regulated feeder heavy silenced cabinet

Condition: excellent (used), CATALOGUE NUMBER 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal, lower, 11kW 2) horizontal, upper, 22kW (7000 rpm) 3) horizontal, lower, 5.5kW spindle diameter 40mm - spindle 1 and 3 adjustable manually, up/down, left/right - spindle 2 adjustable manually, left/right - spindle 2 adjustable electrically, up/down - spindles 2 and 3 are equipped with brakes from above: - 3 infeed rollers, pulling, toothed metal - 1 double outfeed roller, pulling, rubber from below: - pressure roller on the infeed side - ribbed table - pulling roller, metal, smooth - electric adjustment of planing thickness - stepless feed rate adjustment 6-24m/min - feed motor 3kW - feed on Cardan shafts - length of the infeed table 1970mm - automatic table lubrication system - diameter of the dust extraction port 1x150mm, 2x140mm - dimensions (L/W/H) 3070x2000x1800mm - weight 2000kg ADVANTAGES – German production – with 3 heads – for processing slats – ribbed table – heads included – unpainted – very good condition – used planer Net price: 115900 PLN Net price: 27590 EUR Net price calculated according to the exchange rate of 4.2 PLN/EUR Cjdpfezxq I Hsx Aptorg (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6679 TECHNICAL DATA - max. width of workpiece: 250mm - max. height of workpiece: 170mm 6 spindles: 1) horizontal lower: 250mm, 5.5kW 2) vertical right: 170mm, 5.5kW 3) vertical left: 170mm, 5.5kW 4) horizontal upper: 250mm, 7.5kW 5) horizontal lower: 250mm, 7.5kW 6) universal: 250mm, adjustable at 360°, 5.5kW - 6 spindles, electrically adjustable up/down - all spindles adjustable up/down, left/right - spindle diameter: 40mm - 6 top feeding rollers, toothed, pulling, including 2 double rollers - 6 top delivery rollers, pulling, smooth rubber, including 2 double rollers - 2 top pressure rollers - 1 bottom feeding roller, toothed, pulling, swiveling on the table in front of the first spindle - 2 bottom delivery rollers, pulling, smooth metal - 4 bottom side pressure rollers - feed via Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment on a frequency converter, 6-30m/min - feed motor: 4kW - working pressure: 8-10bar - electric adjustment of planing thickness - body lifting motor: 1.1kW - central lubrication of the table - length of the infeed table: 2180mm - diameter of extraction nozzles: 6x150mm - dimensions (L/W/H): 5000x1800x1900mm - weight: approx. 4600kg ADVANTAGES - Made in Italy - 6 heads - DTR + CE documentation - Ideal for both wet and dry wood - Universal spindle - Excellent condition / like new Net price: 114900 PLN Net price: 27350 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR Cedpfezxqvwex Aptsrg (prices may change in case of significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, working width 240mm working height 120mm 6 spindles spindles set: bottom/right/left/top/top/bottom spindles speed 6000 RPM - two last 8300 RPM two axes heads regulation Csdpfozxp I Sox Aptorg spindles diameter 40mm electric regulation of working height variable regulated feeder pneumatic pressure of feeding rolls